Broadcom (R) Corporation
Broadcom USH CD
for the BCM5880/BCM5882 USH product
RELEASE 2.2.00509.22.7.507.0A
(04/20/2012)
RELEASE NOTES
These notes describe release software for the BCM5880 USH Product
For release version information for individual products, see the
"Release Version Information Table" below.
Software Compatibility
======================
This release of software supports:
- BCM5880 USH with A0/B0/C0 step silicon version.
- BCM5882 USH with A0/B0 step silicon version.
Upgrading from the Previous Driver Release
==========================================
It is highly recommended that you upgrade any previous installations
of the Broadcom BCM5880/BCM5882 USH software.
If you are installing on a platform that is currently running DCP version 1.3
or earlier (with USH firmware 1.3 or earlier), the upgrade to DCP version 2.2
(and USH firmware 2.2) MUST occur in the following order:
1) Upgrade firmware to 2.2
2) Upgrade USH host components to 2.2
Contents of the CD
==================
*** Release Version Information Table ***
Product Version Previous Rel.
1. USH Firmware 22.7.507.0 22.7.507.0
2. MA Bios-Driver 4.0.4 4.0.4
3. MP Bios-Driver 4.0.4 4.0.4
4. WinXp Drivers and Applications 4.1.3 4.1.3
5. USH DOS Diagnostics 2.17 2.17
6. CV host software 0.24G 0.24G
7. CV host software 64 bit 0.24G 0.24G
8. CV Firmware 1.0.2.53 1.0.2.52
9. Installer for host components that 2.2.507 2.2.506
includes USH host components
10. Dell Data Protection | Prerequisites A00 X08
11. Dell Data Protection | Application X17 A02
This release contains the following software programs:
1) BCM5880 USH Firmware. Supports TPM 1.2 and PCSC. For more
deatils, please refer to the release notes under firmware/
2) USH MA Bios-Driver. Supports TPM 1.2 for TPM bios access. For more
details, please refer release notes under bios-driver/madriver
3) USH MP Bios-Driver. Supports TPM 1.2 for TPM bios access. For more
details, please refer release notes under bios-driver/mpdriver
4) USH Windows XP TPM drivers and tpm applications which includes
TPM Diagnostics and Firmware upgrade tool. For more details,
please refer release notes under windowsxp/
5) CV host sofware that includes CV USB host driver, CV API user library,
User DLL, and applications. For more details refer to release notes
under windowsxp and windowsxp/cv
6) CV host software for XP 64 bit platform. Includes CV USB host driver,
CV API user library, User DLL and applications.
7) Installer for host components. This includes CV, TPM and UCC components.
Changes/Additions
=================
In Release 2.2.0509.22.7.507.0A
===============================
Firmware:
- Added CID 7 images
Host Components Installer:
- Added WHQL signatures
In Release 2.2.0508.22.7.507.0
==============================
Host Components Installer:
- ESPSW-2298: [WBF2.2]intermettence - no response by swiping FP at WBF GINA when resume from S4
In Release 2.2.0507.22.7.507.0
==============================
Host Components Installer:
- ESPSW-2298: [WBF2.2]intermettence - no response by swiping FP at WBF GINA when resume from S4
In Release 2.2.0506.22.7.507.0
==============================
Firmware:
- ESPSW-2299:[WBF2.2]intermettence - doesn't swipe FP but GINA automatically looping show bad swipe when reboot system
Host Components Installer:
- ESPSW-2304: [WBF2.2][WBF2.3] Install CVHCI64 fail in Win7x64
In Release 2.2.0505.22.7.506.0
==============================
Firmware:
- ESPSW-2285 Fingerprint reader logo – WBDI driver tests – simulate driver insertion sequence fail
Host Components Installer:
- ESPSW-2287 Install CVHCI64 fail in XP64 and Vista64
In Release 2.2.0504.22.7.505.0
==============================
Firmware:
- ESPSW-2245: [DDPA 2.2 RFID performance] It is difficult to pass CV RFID Mfg 3 Minutet test on Dalmore 14" and 15" ST systems: Added RFID config files for Dalmore 14" (534) and 15" (535) platforms.
- ESPSW-2283: adding new config file (RFID configuration file for Dal13).
- ESPSW-2208: [DDPA2.2_E1] intermittence Wave Gina shows "Connect a SC device" during system reboot
- ESPSW-2272: console print banner does not reflect the correct version
WPEUshdiag & WPEUshupgrade:
- ESPSW-2227: DF536212, WPE USH F/W flash issue
- ESPSW-2229: DF535889, [Dalmore14/15] Failed to run "wpeushdiag.exe -u -Sid" in WPE MDX test process
- ESPSW-2259: CR542892, [Dalmore14/15] Failed to run "wpeushdiag.exe -u -Sid" in WPE MDX test process
- ESPSW-2268: DF544908, Failed to run "wpeushupgrade.exe -bat" under WinPE condition
Host Components Installer:
- ESPSW-2235: [WBF] Error message misleading
- ESPSW-2254: [WBF] Broadcom Usbccid become yellow banged after CVHCI Install
- ESPSW-2255: [WBF22] uninstalling 32bit CVHCI will disable WBDI endpoint
- ESPSW-2256: [WBF2.2] Cannot take ownership of TPM with TPM Management and biometric devices will disappear
- ESPSW-2257: [WBF2.2]enhance the FMA finish message
- ESPSW-2260: [WBF2.2] Gina returns error
- ESPSW-2270: [WBF2.2] Install CVHCI64 fail in Win8x64
In Release 2.2.0503.22.7.504.0
==============================
Firmware:
- ESPSW-2248: [DDPA2.2] No POST on Vans15 PT
- ESPSW-2251: [WBF2.2] Black screen hangs after system resumed from S3/S4 on a Mac15 unit.
In Release 2.2.0503.22.7.503.0
==============================
Firmware:
- ESPSW-2249: [WBF2.2] WBF UI or Windows Gina hangs
- ESPSW-2251: [WBF2.2] Black screen hangs after system resumed from S3/S4 on a Mac15 unit.
Host Components Installer:
- ESPSW-2233: [E2-WBF] random failures- "No response by swiping FP at WBF GINA"
- ESPSW-2236: [WBF] random failures- doesn't show WBF logo when system resume from S3
- ESPSW-2241: [WBF2.2] Unable to login windows with Gemalto SC
- ESPSW-2253: WBF stuck on "Fingerprint no match" after several lock/unlock/resume cycles.
In Release 2.2.0502.22.7.502.0
==============================
Firmware:
- ESPSW-2050: [DDPA] Contactless fail to login windowns with login policy "Smartcard or Fingerprint" on Win 7 32/64 bit OS
- ESPSW-2060: random failures- "No response by swiping FP at WBF GINA"
- ESPSW-2246: DF534584 , [PT_E15]Sometimes SUT can't show 3 times PBA screen when input incorrect finger.
Host Components Installer:
- ESPSW-2060: random failures- "No response by swiping FP at WBF GINA"
- ESPSW-2208: [DDPA2.2_E1] intermittence Wave Gina shows "Connect a SC device" during system reboot
- ESPSW-2242: [WBF2.2] FP could not log into Windows (i.e.) FP no response) after system resumed from s3
In Release 2.2.0500.22.7.501.0
==============================
Host components Installer:
- ESPSW-2240: enable WBDI interface during install
- ESPSW-2060: random failures- "No response by swiping FP at WBF GINA"
- ESPSW-2067: Gemalto Bio SC - "Fingerprint reader not detected" error returns with the fingertip swipe only.
- ESPSW-2236: [WBF] random failures- doesn't show WBF logo when system resume from S3
- ESPSW-2233: [E2-WBF] random failures- "No response by swiping FP at WBF GINA"
Known Issues
============
- none
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.