Broadcom (R) Corporation
Release version 23.7.008.0
(10/21/2012)
RELEASE NOTES
=============
These notes describes the firmware release of USH BCM 5880/5882.
This USH firmware release includes support for the following:
1. TPM version 1.2.
2. Firmware upgrade capability [CV and TPM].
3. Contacted/Contactless CCID capability.
4. CV 1.0 api support.
Product Version
======= ========
USH Firmware modules:
1. USH Firmware 23.7.008.0
2. TPM Firmware 1.2.7.15
3. CCID Firmware 0.3.1.1
4. CV Firmware 1.0.2.53
USH SBI Firmware:
1. SBI Firmware 55
3rd party Libaries:
1. Validity 4.2.424
Contents of this release:
==========================
1) sbi<chip_id><cust id>.bin - this is the signed ush sbi image.
2) bcm<chip_id><cust id>.bin - this is the signed brcm ush firmware image.
3) fsb<chip_id><cust id>.bin - Manufacturing image. sbi + bcm for a 2MB flash.
4) clearscd.bin - image used for CV upgrade
Where
<chip_id> - refers to chip id eg: A0, B0, C0.
<cust id> - refers to customer id note: 0 & 1 are not shown as cust id.
[XXXXXXXX.otp are binary images for otp programmed customer id 1 based systems]
[XXXXXXX7.otp are binary images for otp programmed customer id 7 based systems]
Further references of images in this document would be as <name>XXXXX.bin where 'XXXXX' is the version of the binary file.
History
========
Date Release Description
=====================================================================================================
10/21/2012 23.7.008.0 CustID 1/FF
- ESPSW-2451: [DDPA2.3] Fingerprint no response in Wave Gina after resume from S4
10/03/2012 23.7.007.0 CustID 1/FF
- ESPSW-2363: TPM migration issue using TPM_MS_REWRAP method
- ESPSW-2286: DF503269 [PT_E15] USH smart card test fail
- ESPSW-2288: DF548660 , USH smart card test fail on Dalmore-14/15
- ESPSW-2449: [DDPA2.3] Wave Gina show "Initializing fingerprint scanner....." when resume from S3 with policy "Smartcard and fingerprint"
09/02/2012 23.7.006.0 CustID 1/FF
- ESPSW-2378: [DDPA2.3] CLSC no response in PBA authentication
- ESPSW-2432: [DDPA2.3]intermettence - FMA GINA auto popup "the quality of the fingerprint scan was not ...." waring message when system resume from S3
08/25/2012 23.7.005.0 CustID 1/FF
- ESPSW-2315: Enhance fingerprint performance for 2.3
08/09/2012 23.7.004.0 CustID 1/FF
- ESPSW-2285: [WBF2.2] WLK1.6 Fingerprint Reader Logo (WBDI driver tests) - Simulate driver insertion sequence fail
07/14/2012 23.7.003.0 CustID 1/FF
- ESPSW-2363: TPM migration issue using TPM_MS_REWRAP method
06/26/2012 23.7.002.0 CustID 1/FF
- ESPSW-2184: [DDPA2.2_E1] CLSC no response in Wave Gina after resume from S3
04/07/2012 23.7.001.0 CustID 1/FF
- initial release
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.