Broadcom (R) Corporation
Broadcom USH CD
for the BCM5880/BCM5882 USH product
RELEASE 2.3.0024.23.7.009.0
(10/24/2012)
RELEASE NOTES
These notes describe release software for the BCM5880 USH Product
For release version information for individual products, see the
"Release Version Information Table" below.
Software Compatibility
======================
This release of software supports:
- BCM5880 USH with A0/B0/C0 step silicon version.
- BCM5882 USH with A0/B0 step silicon version.
Upgrading from the Previous Driver Release
==========================================
It is highly recommended that you upgrade any previous installations
of the Broadcom BCM5880/BCM5882 USH software.
If you are installing on a platform that is currently running DCP version 1.3
or earlier (with USH firmware 1.3 or earlier), the upgrade to DCP version 2.3
(and USH firmware 2.3) MUST occur in the following order:
1) Upgrade firmware to 2.3
2) Upgrade USH host components to 2.3
Contents of the CD
==================
*** Release Version Information Table ***
Product Version Previous Rel.
1. USH Firmware 23.7.009.0 23.7.008.0
2. MA Bios-Driver 4.0.4 4.0.4
3. MP Bios-Driver 4.0.4 4.0.4
4. WinXp Drivers and Applications 4.1.3 4.1.3
5. USH DOS Diagnostics 2.17 2.17
6. CV host software 0.24G 0.24G
7. CV host software 64 bit 0.24G 0.24G
8. CV Firmware 1.0.2.53 -
9. Installer for host components that 2.3.024 2.3.023
includes USH host components
10. Dell Data Protection | Prerequisites A00 X08
11. Dell Data Protection | Application 2.2.1(A04) X17
This release contains the following software programs:
1) BCM5880 USH Firmware. Supports TPM 1.2 and PCSC. For more
deatils, please refer to the release notes under firmware/
2) USH MA Bios-Driver. Supports TPM 1.2 for TPM bios access. For more
details, please refer release notes under bios-driver/madriver
3) USH MP Bios-Driver. Supports TPM 1.2 for TPM bios access. For more
details, please refer release notes under bios-driver/mpdriver
4) USH Windows XP TPM drivers and tpm applications which includes
TPM Diagnostics and Firmware upgrade tool. For more details,
please refer release notes under windowsxp/
5) CV host sofware that includes CV USB host driver, CV API user library,
User DLL, and applications. For more details refer to release notes
under windowsxp and windowsxp/cv
6) CV host software for XP 64 bit platform. Includes CV USB host driver,
CV API user library, User DLL and applications.
7) Installer for host components. This includes CV, TPM and UCC components.
Changes/Additions
=================
In Release 2.3.0024.23.7.009.0
==============================
- Firmware:
- ESPSW-2466: [DDPA2.3] Fingerprint - PBA direct show "Identification Failed - Press any key to continue" when system resume form S4
- ESPSW-2467: [DDPA2.3] Fingerprint no response in Wave Gina and PBA after system resume from S3 on VIDA Patron (AT sensor)
- Host Components:
- ESPSW-2449: [DDPA2.3] Wave Gina show "Initializing fingerprint scanner....." when resume from S3 with policy "Smartcard and fingerprint"
- ESPSW-2468: [DDPA2.3] Wave Gina show "cannot detect a supported CLSC reader. Please connect a CLSC reader" when log off/switch user
In Release 2.3.0023.23.7.008.0
==============================
- Firmware:
- ESPSW-2451: [DDPA2.3] Fingerprint no response in Wave Gina after resume from S4
- Host Components:
- ESPSW-2370: [DDPA2.3] Wave Gina display "Cannot detect FP reader...." when select policy "Smartcard or Fingerprint"
In Release 2.3.0022.23.7.007.0
==============================
- Host Components:
- ESPSW-2457: [DDPA2.3] WHCK device test fail with smartcard reader
In Release 2.3.0021.23.7.007.0
==============================
- Host Components:
- ESPSW-2457: [DDPA2.3] WHCK device test fail with smartcard reader
In Release 2.3.0020.23.7.007.0
==============================
- Host Components:
- added WHQL vertification for cvusb and wbf drivers
- ESPSW-2459: BITS048990 , Broadcom USH is not properly installed during upgrade
- ESPSW-2460: BITS048841 , DDPA 2.3: XP-Repair causes BRCM TPM popup
- ESPSW-2448: [DDPA2.3] Wave Gina takes over 1 minute from "Please wait...." to "Cannot detect FP reader...." to "Place card".
- ESPSW-2449: [DDPA2.3] Wave Gina show "Initializing fingerprint scanner....." when resume from S3 with policy "Smartcard and fingerprint"
- ESPSW-2450: [DDPA2.3] CLSC no response in Wave Gina when use policy "Smartcard or password" on XP32
- ESPSW-2451: [DDPA2.3] Fingerprint no response in Wave Gina after resume from S4
In Release 2.3.0019.23.7.007.0
==============================
-Firmware:
- added CID 7 FW images
- Host Components:
- revert back changes for ESPSW-2410 and ESPSW-2442
In Release 2.3.0018.23.7.007.0
==============================
- Host Components:
- ESPSW-2461: add minimum FW version check to CVHCI
In Release 2.3.0017.23.7.007.0
==============================
- Host Components:
- ESPSW-2456: [DDPA2.3] CVHCI Installation process automatically UnInstallation in XP32
In Release 2.3.0016.23.7.007.0
==============================
- Host Components:
- ESPSW-2442:[DDPA2.3] LOCKing/UNLOCKing system several times cause memory leak
- ESPSW-2447: [DDPA2.3] It takes a long time to prompts installshield Wizard when I execute CVHCI.msi
- Firmware:
- ESPSW-2363: TPM migration issue using TPM_MS_REWRAP method
- ESPSW-2286: DF503269 [PT_E15] USH smart card test fail
- ESPSW-2288: DF548660 , USH smart card test fail on Dalmore-14/15
- ESPSW-2449: [DDPA2.3] Wave Gina show "Initializing fingerprint scanner....." when resume from S3 with policy "Smartcard and fingerprint"
In Release 2.3.0015.23.7.006.0
==============================
- Host Components:
- ESPSW-2410: [DDPA2.3] intermittence - Wave GINA is stuck at Dell icon when resumes from s3 then swipe finge on W8 system
In Release 2.3.0014.23.7.006.0A
===============================
- Host Components:
- added WHQL vertification for cvusb and wbf drivers. Windows 8 only.
In Release 2.3.0014.23.7.006.0
==============================
- Host Components:
- ESPSW-2399: [DDPA2.3] Gina Showed "Initializing Fingerprint scanner " then "Failure" when Gina login page resuming from S3
- ESPSW-2418: [DDPA2.3] Cannot enroll CLSC. Wave return "an error occur when enrolling your smartcard..... (RN: 020000C0)......."
- ESPSW-2419: [DDPA2.3] Fails to add FP record for back to back restores
- ESPSW-2432: [DDPA2.3]intermettence - FMA GINA auto popup "the quality of the fingerprint scan was not ...." waring message when system resume from S3
- Firmware:
- ESPSW-2378: [DDPA2.3] CLSC no response in PBA authentication
- ESPSW-2432: [DDPA2.3]intermettence - FMA GINA auto popup "the quality of the fingerprint scan was not ...." waring message when system resume from S3
In Release 2.3.0013.23.7.005.0
==============================
- Host Components:
- ESPSW-2399: [DDPA2.3] Gina Showed "Initializing Fingerprint scanner " then "Failure" when Gina login page resuming from S3
- ESPSW-2411: [DDPA2.3] Swipe fp has no response at FMA GINA when reboot system
- ESPSW-2423: [DDPA2.3] Failure to enumerate platform users in upgrade scenario
- ESPSW-2426: add Windows 8 support to the EXTRACTDRIVERS command
In Release 2.3.0012.23.7.005.0
==============================
- Firmware:
- ESPSW-2315: Enhance fingerprint performance for 2.3
- Host Components:
- ESPSW-2368: [DDPA2.3] Finger print sensor no response at Window logon screen after system resumed from S3
- ESPSW-2362: [DDPA2.3] Ushupgrade.exe expects .NET 3.5 to be present in Win8
- ESPSW-2372: [DDPA2.3] Win8 machine has WBF disabled after installation
In Release 2.3.0011.23.7.004.0
==============================
- Host Components:
- ESPSW-2394: [DDPA2.3] CV archive failed with FingerPrint user
In Release 2.3.0010.23.7.004.0
==============================
- Host Components:
- ESPSW-2391: [DDP2.3] CVHCI installer failed in Win8 and Win7
In Release 2.3.0009.23.7.004.0
==============================
- Firmware:
- ESPSW-2285: [WBF2.2] WLK1.6 Fingerprint Reader Logo (WBDI driver tests) - Simulate driver insertion sequence fail
- Host Components:
- ESPSW-2321: [Win8 WHCK] - Fail to run Device Driver INF Verification Test
- ESPSW-2322: [Win8 WHCK] - Errors with Fingerprint engine adapter tests
- ESPSW-2341: [DDPA2.3] No SC/ CLSC authentication in PBA stage after restore credentials
- ESPSW-2352: [DDPA2.3] CLSC backup failure - Wizard hangs
- ESPSW-2366: [DDPA2.3] FP restore credentials failure - "missing credentials" message return
- ESPSW-2367: [DDPA2.3] intermittence Wave FP Gina shows "Cannot detect FP reader.... " during system reboot
- ESPSW-2374: [DDPA2.3] Archive failed with SC credential
- ESPSW-2376: [DDPA2.3] Cannot enroll FP in CLSC user. The DDPA will hang at "While your identity is verified..."
- USHCVDiag:
- ESPSW-2386: v1.3.x.x: Now collect BrcmAdapterLog.txt in ushcvdiag.exe
In Release 2.3.0008.23.7.003.0
==============================
- Firmware:
- ESPSW-2363: TPM migration issue using TPM_MS_REWRAP method
- Host Components:
- ESPSW-2350: [DDPA2.3_Win8] CCID drivers get yellow bang after WAVE controls the Volatile CV Only Radio Mode
- ESPSW-2355: [DDPA2.3 _Vista64] SSO does not work with Warm boot and Cold boot
- ESPSW-2348: [DDPA2.3] Gina Showed "Initializing Fingerprint scanner " and no response when resuming from S4
In Release 2.3.0007.23.7.002.0
==============================
- Host Component Installer:
- ESPSW-2346 (Storage adapter FP template records and CV objects don't get deleted)
- Added WBF LMS support
In Release 2.3.0006.23.7.002.0
==============================
- Firmware
- ESPSW-2184: [DDPA2.2_E1] CLSC no response in Wave Gina after resume from S3
- Host Component Installer
- ESPSW-2334: [DDPA2.3] Install DDPA2.3 fail in Win8
- ESPSW-2331: [DDPA2.3_Win8] Contactless smartcard cannot enroll
- ESPSW-2342: [DDPA2.3] Gina Showed "Connect a SC device" and no response when resuming from S4
- ESPSW-2330: [WBF2.3] Any finger enrolled after the first one fails to verify on Windows login
- ESPSW-2344: [DDPA2.3] Enumeration of CV objects during SSO Windows login fails to detect enrolled objects
In Release 2.3.0005.23.7.001.0
==============================
- Host Components Installer
- CR432872 / ESPSW-1897: CV archive failed after changing computer name
- ESPSW-2295 / ESPSW-2312: Added PBA support for WBF enrolled FP templates
In Release 2.3.0004.23.7.001.0
==============================
- Host Components Installer
- ESPSW-2306: [WBF2.3] FP device shows unavailable after locking/unlocking system
In Release 2.3.0003.23.7.001.0
==============================
- Host Components Installer
- ESPSW-2298: [WBF2.2]intermettence - no response by swiping FP at WBF GINA when resume from S4
- ESPSW-2304: [WBF2.2][WBF2.3] Install CVHCI64 fail in Win7x64
- ESPSW-2306: [WBF2.3] FP device shows unavailable after locking/unlocking system
- ESPSW-2178: DF522850 , After uninstall, the Advanced>Wave folder is gone due to BRCM LMS log file
In Release 2.3.0002.23.7.001.0
==============================
- Host Components Installer
- ESPSW-2297: create unified installer with BioAPI and WBF support
In Release 2.3.0001.23.7.001.0
==============================
- initial release
Known Issues
============
- none
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.