1. 2006pro.zip Driver
2. Inforead.txt File Contents

Inforead.txt Driver File Contents (2006pro.zip)

        *************************************************
        ***                                           ***
        *** INSTRUCTION TO UPGRADE CD-R 2006 FIRMWARE ***
        ***                                           ***
        *************************************************


Please upgrade the firmware using MS-DOS system installed with DOS ASPI
or using MS-DOS mode of Windows 95.

NOTE:  DONOT use Windows NT Operating System to upgrade the firmware!


To upgrade the firmware, start the firmware flashing software
    with the appropriate firmware binary code file as follows:
    Type at the DOS prompt
        
        FLASHUPD 926S11E.BIN #
        
    Where:  FLASHUPD = firmware flashing software "FLASHUPD.EXE"
            926S11E.BIN = firmware binary code file version 1.1e
            # = SCSI ID of CD-R 2006 drive


NOTE:  During firmware flash, make sure the computer system where the
       updating takes place does not gets powered down.  Otherwise
       the drive's FLASH ROM will be destroyed and not recoverable.

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.