Appian Graphics Jeronimo 2000 Readme information for Windows 2000 CONTENTS ================================================================ 1) How to Contact Appian 2) How to Install Jeronimo 2000 Windows 2000 Drivers 3) How to Uninstall Jeronimo 2000 Windows 2000 Drivers 4) HydraVision 98 Desktop Management Support 5) Legal Information 1) How to Contact Appian ================================================================ Appian Technical Support may be reached at 1-800-422-7369 or by email at support@appian.com. Appian Sales may be reached at 1-800-727-7426. Appian is available on the Web at http://www.appian.com. 2) How to Install Jeronimo 2000 Windows 2000 Drivers ================================================================ These installation instructions are for Jeronimo 2000 Windows 2000 drivers only. HydraVision 98 multiple monitor desktop management software is available separately from Appian Graphics for Windows 2000 and is installed separately. Installation instructions for the Jeronimo 2000 PCI and AGP versions are shown separately. NOTE: If you downloaded the Jeronimo 2000 driver package from the internet, unzip the downloaded file to a temporary subdirectory on your hard drive. Appian recommends unzipping files to your hard drive rather than to floppy disks as the driver files may be larger than the 1.44 MB capacity of a single diskette. The subdirectory you create on your hard drive should be empty of all files prior to unzipping the Jeronimo 2000 driver files. This temporary subdirectory can be deleted after driver installation. To install the Jeronimo 2000 PCI Windows 2000 drivers, perform the following steps: a) Upon boot up of the system, the Found New Hardware Wizard will appear. Click NEXT. b) A generic "video controller" device has been detected. Select the "Search for a suitable device..." option and click NEXT. c) Click NEXT, click NEXT again, click YES then click FINISH. d) You will be prompted to restart the system. Click YES. e) Because there are multiple graphics processors on the Jeronimo 2000, the Found New Hardware Wizard will appear upon reboot of the system. Click NEXT. f) A generic "multimedia video controller" device has been detected. Select the "Search for a suitable device..." option and click NEXT. g) Click NEXT. h) No files will be found by the Wizard. Select the "Disable the device..." option and click FINISH. i) Repeat steps e) through h) for the generic "multimedia controller" device that has been detected. j) The Found New Hardware Wizard will appear. Click NEXT. k) The "Appian Jeronimo 2000 Win2K" device has been detected. Select the "Search for a suitable device..." option and click NEXT. l) Click NEXT, click NEXT again, click YES, then click FINISH. m) Windows 2000 is now in 640x480 single monitor mode. You can change this and other settings using the Display Properties dialog box. To install the Jeronimo 2000 AGP Windows 2000 drivers, perform the following steps: a) Upon boot up of the system, the Found New Hardware Wizard will appear. Click NEXT. b) A generic "coprocessor" device has been detected. Select the "Search for a suitable device..." option and click NEXT. c) Click NEXT, click NEXT again, then click FINISH. d) Because there are multiple graphics processors on the Jeronimo 2000, the Found New Hardware Wizard will appear. Click NEXT. e) A generic "video controller" device has been detected. Select the "Search for a suitable device..." option and click NEXT. f) Click NEXT, click NEXT again, click YES, then click FINISH. g) You will be prompted to restart the system. Click YES. h) Upon reboot of the system, the Found New Hardware Wizard will appear. Click NEXT. i) The "Appian Jeronimo 2000 Win2K" device has been detected. Select the "Search for a suitable device..." option and click NEXT. j) Click NEXT, click NEXT again, click YES, then click FINISH. k) Windows 2000 is now in 640x480 single monitor mode. You can change this and other settings using the Display Properties dialog box. 3) How to Uninstall Jeronimo 2000 Windows 2000 Drivers ================================================================ To uninstall Jeronimo 2000 drivers in Windows 2000, use the Windows Add/Remove Hardware control panel utility. 4) HydraVision 98 Desktop Management Support ================================================================ In Windows 2000, Appian HydraVision desktop management software is installed separately from the Jeronimo 2000 driver. HydraVision software for both Windows 98 and Windows 2000 is called HydraVision 98. To install HydraVision 98, please download the software from the Appian Graphics FTP site at http://ftp.appian.com, or refer to the Jeronimo 2000 CD-ROM or diskettes and install per the instructions in that package. 5) Legal Information ================================================================ This material is made available for use under a license from Appian Graphics and its use is subject to all conditions and restrictions provided by the license agreement. Appian software programs and Appian hardware devices are covered by one or more of the following U.S. patents: 5,835,090 5,848,294 5,949,437 Additional patents are pending.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.