ASUS NX1101 Gigabit Network Adapter Novell DOS ODI Driver Contents: --------- 1. File Description 2. Driver Installation for Novell DOS client 3. Parameters Description 1. File Description ------------------- Filename Description ========== ================================================================ IPGODI.COM Novell DOS ODI driver. This driver is designed for DOS ODI driver. Using this driver, you can login into Novell Netware server and access server's files in DOS environment. NET.CFG Novell DOS client Configuration File. You can change client's speed and binding protocol by this file. README.TXT A summary of the contents for Novell DOS ODI driver. This file, which you are reading now. 2. Driver Installation for Novell DOS client -------------------------------------------- ** Driver Installation for Dos ** a. Boot up Novell Server. First at all, you need to boot up Novell Server. b. Need file for Novell DOS client. LSL.COM, IPXODI.COM, VLM.COM, and VLM.COM necessary file. c. Login into Novell Server. Boot client computer into DOS mode. Typing following command, you would touch novell server. LSL.COM IPGODI.COM IPXODI.COM VLM.COM login admin The LSL.COM is Link Support Layer. The IPGODI.COM is my adapter driver. The IPXODI.COM is IPX protocol layer binding on IPGODI driver. The VLM.COM is NetWare virtual loadable module manager. d. Unload Novell Dos Client. After finish your job, you can unload you Novell dos client, using following command: logout VLM u IPXODI u IPGODI u LSL u 3. Parameters Description ------------------------- ** Change Link Speed ** a. Using NET.CFG you change link speed and half/full duplex mode. You can not open two speed at the same time. Using ';' to mark the speed modes which you don't need. For example, if you wanted to using 10Mb Half mode: ;AUTOSENSE 10BaseT_NWAY ;10BaseTFD_NWAY ;... b. There are available speed mode. Speed Mode Descrtion ================ ================================================ AUTOSENSE ;Performs Power-Up Autosense on all types of boards ;in order to connect to the active line, and dynamic ;10/100 autosensing (at run-time) on boards ;Supporting it. 10BaseT_NWAY ;Select 10Mbps half duplex NWAY mode. 10BaseTFD_NWAY ;Select 10Mbps full duplex NWAY mode. 100BaseTX_NWAY ;Select 100Mbps half duplex NWAY mode. 100BaseTXFD_NWAY ;Select 100Mbps full duplex NWAY mode. 10BaseT ;Select 10Mbps half duplex Force mode. 10BaseTFD ;Select 10Mbps full duplex Force mode. 100BaseTX ;Select 100Mbps half duplex Force mode. 100BaseTXFD ;Select 100Mbps full duplex Force mode. ** Change Link Protocol ** There four frame type that you can bind to IPGODI driver. These four frame type can be binded to IPGODI driver at the same time, but you need to bind at least one protocol which your Novell Server provide now. Also using ';' to mark the protocol you don't need. Frame Ethernet_802.2 Frame Ethernet_802.3 Frame Ethernet_II Frame Ethernet_snapDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.