Readme Changing Printer's Symbol Settings If your printer's symbol setting was not automatically or correctly set during installation, you can set the symbol setting manually. Place the HP LaserJet 1150/1300 CD in the CD-ROM drive and from a DOS prompt type: copy /b x:\SYMSET\ukrainesym.pjl LPT1 (where x is your CD-ROM drive, PC866UKR (Ukraine) is the desired symbol set and LPT1 is the port where your printer is connected). In each symbol set file, we tried to select the most common symbol set. If the wrong one is selected, you can modify the selection by substituting the code after the = sign. See the example below: Original file is listed below: %-12345X@PJL @PJL DEFAULT LPARM:PCL SYMSET= PC8GRK @PJL COMMENT PC851GRK @PJL COMMENT ISOGRK @PJL COMMENT GREEK8 %-12345X To modify the symbol set from PC8GRK to GREEK8, replace the desired code found after the @PJL COMMENT remark behind the PCL SYMSET= . See the example below: %-12345X@PJL @PJL DEFAULT LPARM:PCL SYMSET= GREEK8 %-12345X NOTE: The "" (box character) must be replaced with the "escape" character, also known as ASCII 027 or ASCII 27. This character can be generated in the DOS editor called "edit" by following this example: - click on Start, Programs, Command Prompt. - type "edit" (without the quotes) at the C:\> prompt, then press the Enter key. - press [ Ctrl ] and [ p ] keys simultaneously, followed by the [ Ctrl ] and [ [ ] (the left bracket "[") keys simultaneously. A left-pointing arrow should appear on the screen, this is the "escape" character. - type the rest of the command that you want, such as: %-12345X@PJL @PJL DEFAULT ORIENTATION=LANDSCAPE %-12345X@PJL NOTE: Once again, the "" (box character) above must be replaced with the "escape" character. Save the file you created (example: greek8sym.pjl) on your PC hard drive. Copy the file to your printer - from a DOS prompt, type: copy /b x:\greek8sym.pjl LPT1 (where x is your hard drive, and LPT1 is the port where your printer is connected).Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.