BcmGnssLocationSensor.inf Driver File Contents (BIOS_Acer_1.92_A_A.zip)

ÿþ;* Copyright 2012 Broadcom Corporation -- http://www.broadcom.com

;* This program is the proprietary software of Broadcom Corporation and/or

;* its licensors, and may only be used, duplicated, modified or distributed

;* pursuant to the terms and conditions of a separate, written license

;* agreement executed between you and Broadcom (an "Authorized License").

;* Except as set forth in an Authorized License, Broadcom grants no license

;* (express or implied), right to use, or waiver of any kind with respect to

;* the Software, and Broadcom expressly reserves all rights in and to the

;* Software and all intellectual property rights therein. IF YOU HAVE NO

;* AUTHORIZED LICENSE, THEN YOU HAVE NO RIGHT TO USE THIS SOFTWARE IN ANY

;* WAY, AND SHOULD IMMEDIATELY NOTIFY BROADCOM AND DISCONTINUE ALL USE OF

;* THE SOFTWARE.

;******************************************************************************/

;

; Broadcom GNSS Location Sensor driver for Windows 8 and beyond

;

; BcmGnssLocationSensor.inf

;



[Version]

Signature	= "$Windows NT$"

Class		= Sensor

ClassGuid	= {5175D334-C371-4806-B3BA-71FD53C9258D}

Provider	= %Broadcom%

CatalogFile	= BcmGnssLocationSensor.cat

PnpLockdown = 1

DriverVer=10/29/2012,19.14.8401.4

; =================== Manufacturer/Models sections =======================



[Manufacturer]

%Broadcom%                      = Broadcom,NTx86



[Broadcom.NTx86]

%BcmGnssLocationSensor.DeviceDesc% = BcmGnssLocationSensor_Install,Sensors\BcmGnssLocationSensor



; =================== Sensors Service Driver  Device ==================================



[BcmGnssLocationSensor_Install.NT]

CopyFiles       = GnssFileCopy, UMDriverCopy

AddProperty     = DriverPropertiesSection

AddReg          = RadioManager_AddReg



[BcmGnssLocationSensor_Install.NT.hw]





[BcmGnssLocationSensor_Install.NT.Services]

AddService      = WUDFRd,0x000001fa,WUDFRD_ServiceInstall



[BcmGnssLocationSensor_Install.NT.CoInstallers]

AddReg          = WUDF_CoInstallers_AddReg

CopyFiles       = WUDF_CoInstallers_CopyFiles



[BcmGnssLocationSensor_Install.NT.Wdf]

UmdfService             = BcmGnssLocationSensor,UMDFBcmGnssLocationSensor_Install

UmdfServiceOrder        = BcmGnssLocationSensor

UmdfImpersonationLevel  = Impersonation



; =================== UMDF Service Install section ===================



[UMDFBcmGnssLocationSensor_Install]

UmdfLibraryVersion      = 1.11.0

ServiceBinary           = %12%\UMDF\BcmGnssLocationSensor.dll

DriverCLSID             = {46F92918-07DE-4466-8FBA-61D3AA195B49}



[WUDFRD_ServiceInstall]

DisplayName     = %WudfRdDisplayName%

ServiceType     = 1

StartType       = 3

ErrorControl    = 1

ServiceBinary   = %12%\WUDFRd.sys



[SourceDisksFiles]

BcmGnssLocationSensor.dll  = 1

BcmGnss.dll = 1

BcmGnssAtRil.dll = 1

BcmGnssConfig.xml = 1

BcmGnssGpioAcpi.dll = 1



[SourceDisksNames]

1 = %MediaDescription%





[WUDF_CoInstallers_AddReg]

HKR,,CoInstallers32,0x00010000,"WUDFCoInstaller.dll"



[WUDF_CoInstallers_CopyFiles]



[RadioManager_AddReg]

HKCR,CLSID\{46F92918-07DE-4466-8FBA-61D3AA195B49},, 0x0, "Broadcom GNSS Radio Manager"

HKCR,CLSID\{46F92918-07DE-4466-8FBA-61D3AA195B49}\InProcServer32,,0x00020000,"%SystemRoot%\system32\drivers\UMDF\BcmGnssLocationSensor.dll"

HKCR,CLSID\{46F92918-07DE-4466-8FBA-61D3AA195B49}\InProcServer32,"ThreadingModel",0x0,"Both"

HKLM,SYSTEM\CurrentControlSet\Control\RadioManagement\{46F92918-07DE-4466-8FBA-61D3AA195B49},"GnssRadioManager",0x00020000,"%SystemRoot%\system32\drivers\UMDF\BcmGnssLocationSensor.dll"

HKLM,SYSTEM\CurrentControlSet\Control\RadioManagement\{46F92918-07DE-4466-8FBA-61D3AA195B49},"ThreadingModel",0x0,"Both"

HKLM,"SYSTEM\CurrentControlSet\Control\RadioManagement\Misc\BcmGnssRadioManager",currRadioState,0x10001,0x0

HKLM,"SYSTEM\CurrentControlSet\Control\RadioManagement\Misc\BcmGnssRadioManager",prevRadioState,0x10001,0x0



[DestinationDirs]

UMDriverCopy            = 12,UMDF

GnssFileCopy            = 12,UMDF



[UMDriverCopy]

BcmGnssLocationSensor.dll,,,0x00004000  ; COPYFLG_IN_USE_RENAME



[GnssFileCopy]

BcmGnss.dll,,,0x00004000  ; COPYFLG_IN_USE_RENAME

BcmGnssAtRil.dll,,,0x00004000  ; COPYFLG_IN_USE_RENAME

BcmGnssConfig.xml,,,0x00004000  ; COPYFLG_IN_USE_RENAME

BcmGnssGpioAcpi.dll,,,0x00004000  ; COPYFLG_IN_USE_RENAME



; =================== Driver Property section ===================



[DriverPropertiesSection]

DeviceIcon,,,,"%SystemRoot%\system32\sensorscpl.dll,-1000"



; =================== Generic ==================================



[Strings]

Broadcom                    = "Broadcom"

MediaDescription            = "Broadcom GNSS Geolocation Sensor Driver Installation Media"

WudfRdDisplayName           = "Windows Driver Foundation - User-mode Driver Framework Reflector"

BcmGnssLocationSensor.DeviceDesc = "Broadcom GNSS Geolocation Sensor"

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 1.47