135_nvram_PVT_20121019.txt Driver File Contents (BIOS_Acer_1.51_A_A.zip)

# BCM4330 (6-layer) board T77H389.00 
# Two antennas design with antenna diversity
# has ext 5GHz PA + LNA and SP3T switch share with BT/2.4G Wi-Fi
# NVRAM version: 125 for PVT, released on 2012-10-18
#----------------------------------------
# Notes for 20120703 release
# 1. Updated 2.4G PA parameter based on CpK of EVT3 build for EVT4 sample
# 2. Correct maximum output power for 2.4G/5GHz follow V3.0 specification sheet.
# 3. Correct power offset for 2.4G/5GHz follow V3.0 specification sheet.
# Notes for 20120829 release
# 1. Request from Pegatron Calvin Chan and Jesse_Hsu
# 2. BRCM Alan tunes parameters "#btc_parameters " to solve "BT & Wifi Coexistence of use" problem.
# 3. Correct power offset for 2.4G/5GHz follow V3.0 specification sheet.
# Notes for 20121009 release
# 1. Request from Acer to disable CH14 in worldwide SKU
# 2. BRCM Terry changed the ccode/regrev of NVRAM as XY/3
# Notes for 20121018 release
# 1. Request from Acer: the worldwide country is active on CH1-11, passive CH12-14, and passive all 5GHz
# 2. BRCM Terry changed the ccode/regrev of NVRAM as XZ/2
#----------------------------------------
# Sample variables file for BCM94330 SD WL AGB board
manfid=0x2d0
prodid=0x0547
vendid=0x14e4
devid=0x4360
boardtype=0x0547
boardrev=0x32
#boardflags: 5GHz FEM: has ext 5GHz PA + LNA;
#            2.4GHz FEM: SP3T switch share with BT;
boardflags=0x10080200
nocrc=1
xtalfreq=26000
boardnum=22
macaddr=00:90:4c:c5:12:38
ag0=255
aa2g=3
aa5g=3
ccode=XZ
regrev=2
pa0itssit=0x20
#PA parameters for 2.4GHz
pa0b0=5350
pa0b1=-671
pa0b2=-155

extpagain5g=2
# rssi params for 2.4GHz
rssismf2g=0xa
rssismc2g=0x3
rssisav2g=0x7
cckPwrOffset=3
# rssi params for 5GHz
rssismf5g=0x4
rssismc5g=0x7
rssisav5g=0x2
#PA parameters for lower a-band
pa1lob0=5785
pa1lob1=-718
pa1lob2=-184
#PA parameters for midband
pa1b0=5835
pa1b1=-746
pa1b2=-193
#PA parameters for high band
pa1hib0=5020
pa1hib1=-648
pa1hib2=-224
rxpo5g=0
maxp2ga0=0x32
maxp5ga0=0x32
maxp5gla0=0x32
maxp5gha0=0x32
# 2.4G Tx Power offsets
ofdm2gpo=0x00000000
mcs2gpo0=0x0000
mcs2gpo1=0x0000
# 5G Tx Power offsets
ofdm5gpo=0x00000000
ofdm5glpo=0x00000000
ofdm5ghpo=0x00000000
mcs5gpo0=0x0000
mcs5gpo1=0x0000
mcs5glpo0=0x0000
mcs5glpo1=0x0000
mcs5ghpo0=0x0000
mcs5ghpo1=0x0000
sromrev=3
il0macaddr=00:90:4c:c5:12:38
wl0id=0x431b

swctrlmap_2g=0x44844484,0x42824282,0x40804484,0x414242,0x1ff
triso5g=3
swctrlmap_5g=0x50905090,0x68a860a0,0x60a060a0,0x10202,0x0f8

pacalath2g=180
#pacaldix2g1=55
rfreg033=0x19
rfreg033_cck=0x1f
dacrate2g=160
txalpfbyp2g=1
bphyscale=17
cckPwrIdxCorr=-15
pacalpwr2g=13
pacalidx2g1=55
rfreg088=15
#iqlost1off2g=32
txgaintbl=1
txgaintbl5g=1
cckdigfilttype=20
sd_gpout=0 
sd_gpval=1 
sd_gpdc=0 
#btc_parameters 
btc_params8=10000 
btc_params1=25000 
btc_params33=3 
btc_params61=2 
btc_params6=30
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 1.94