;******************************************************************************* ;* ** ;* I N T E L P R O P R I E T A R Y ** ;* ** ;* COPYRIGHT (c) 2003-2011 BY INTEL CORPORATION. ALL RIGHTS RESERVED. NO ** ;* PART OF THIS PROGRAM OR PUBLICATION MAY BE REPRODUCED, TRANSMITTED, ** ;* TRANSCRIBED, STORED IN A RETRIEVAL SYSTEM, OR TRANSLATED INTO ANY ** ;* LANGUAGE OR COMPUTER LANGUAGE IN ANY FORM OR BY ANY MEANS, ELECTRONIC, ** ;* MECHANICAL, MAGNETIC, OPTICAL, CHEMICAL, MANUAL, OR OTHERWISE, WITHOUT ** ;* THE PRIOR WRITTEN PERMISSION OF : ** ;* ** ;* INTEL CORPORATION ** ;* ** ;* 2200 MISSION COLLEGE BLVD ** ;* ** ;* SANTA CLARA, CALIFORNIA 95052-8119 ** ;* ** ;******************************************************************************* ; ; ; File Name: HECI.inf ; Install information file for HECI Driver ; ; Generated by C DriverWizard 3.1.0 (Build 1722) ; Requires DDK Only ; File created on 6/20/2005 ; ;--------- Version Section --------------------------------------------------- [Version] Signature="$WINDOWS NT$" Class=System ClassGUID={4d36e97d-e325-11ce-bfc1-08002be10318} Provider=%Provider% DriverVer=07/02/2012,8.1.0.1263 CatalogFile=HECI.cat [ControlFlags] ; Pnp drivers should not be installable via non-PnP hardware dialogs ExcludeFromSelect = * ;--------- DestinationDirs Section ------------------------------------------- [DestinationDirs] DefaultDestDir = 10 HECI_Files_Driver = 12 HECIx64_Files_Driver = 12 ;--------- SourceDiskNames and SourceDiskFiles Section ----------------------- ; These sections identify source disks and files for installation. [SourceDisksNames] 1 = %Location%,,,"" [SourceDisksFiles] HECI.sys = 1,, HECIx64.sys = 1,, ;--------- Manufacturer and Models Sections ---------------------------------- [Manufacturer] %MfgName% = Intel, NTx86.6.0, NTx86.5.2, NTx86.5.1, NTamd64 [Intel.NTx86.6.0] ; DisplayName Section DeviceId %HECI_DeviceDesc%=HECI_DDI, PCI\VEN_8086&DEV_1E3A %HECI_DeviceDesc%=HECI_DDI, PCI\VEN_8086&DEV_1CBA %HECI_DeviceDesc%=HECI_DDI, PCI\VEN_8086&DEV_1C3A %HECI_DeviceDesc%=HECI_DDI, PCI\VEN_8086&DEV_1DBA [Intel.NTx86.5.2] ; DisplayName Section DeviceId %HECI_DeviceDesc%=HECI_DDI, PCI\VEN_8086&DEV_1E3A %HECI_DeviceDesc%=HECI_DDI, PCI\VEN_8086&DEV_1CBA %HECI_DeviceDesc%=HECI_DDI, PCI\VEN_8086&DEV_1C3A %HECI_DeviceDesc%=HECI_DDI, PCI\VEN_8086&DEV_1DBA [Intel.NTx86.5.1] ; DisplayName Section DeviceId %HECI_DeviceDesc%=HECI_DDI, PCI\VEN_8086&DEV_1E3A %HECI_DeviceDesc%=HECI_DDI, PCI\VEN_8086&DEV_1CBA %HECI_DeviceDesc%=HECI_DDI, PCI\VEN_8086&DEV_1C3A %HECI_DeviceDesc%=HECI_DDI, PCI\VEN_8086&DEV_1DBA [Intel.NTamd64] ; DisplayName Section DeviceId %HECI_DeviceDesc%=HECI_DDI_x64, PCI\VEN_8086&DEV_1E3A %HECI_DeviceDesc%=HECI_DDI_x64, PCI\VEN_8086&DEV_1CBA %HECI_DeviceDesc%=HECI_DDI_x64, PCI\VEN_8086&DEV_1C3A %HECI_DeviceDesc%=HECI_DDI_x64, PCI\VEN_8086&DEV_1DBA [Intel] ; Empty section, so this INF does not support Windows 2000. ;---------- DDInstall Sections ----------------------------------------------- ; --------- Windows NT ----------------- [HECI_DDI] CopyFiles=HECI_Files_Driver AddReg=HECI_NT_AddReg [HECI_DDI.Services] AddService = MEI, %FLG_ADDREG_NOCLOBBER%, HECI_Service, winxp.EventLog ;---------- DDInstall Section Windows x64 ---------- [HECI_DDI_x64] CopyFiles=HECIx64_Files_Driver AddReg=HECI_NT_AddReg [HECI_DDI_x64.Services] AddService = MEIx64, %FLG_ADDREG_NOCLOBBER%, HECIx64_Service, winxpe.EventLog ; --------- Registry ---------------------- [HECI_NT_AddReg] ;reg-root,[subkey],[value-entry-name],[flags],[value] HKR,,WdTimerTic,%REG_DWORD%,120 [HECI_NT_AddReg.Security] "D:P(A;CI;GA;;;BA)(A;CI;GA;;;SY)(A;CI;GA;;;LS)" [HECI_DDI.HW] AddReg=HECI__NT_HW_AddReg [HECI_DDI_x64.HW] AddReg=HECI__NT_HW_AddReg [HECI__NT_HW_AddReg] HKR,,DeviceCharacteristics,0x10001,0x100 HKR,,Security,,"D:P(A;;GA;;;BA)(A;;GA;;;SY)(A;CI;GA;;;LS)" [HECI__NT_HW_AddReg.Security] "D:P(A;CI;GA;;;BA)(A;CI;GA;;;SY)(A;CI;GA;;;LS)" ; --------- Service ---------------------- [HECI_Service] DisplayName = %HECI_SvcDesc% ServiceType = %SERVICE_KERNEL_DRIVER% StartType = %SERVICE_DEMAND_START% ErrorControl = %SERVICE_ERROR_NORMAL% ServiceBinary = %12%\HECI.sys LoadOrderGroup = Extended Base [HECIx64_Service] DisplayName = %HECI_SvcDesc% ServiceType = %SERVICE_KERNEL_DRIVER% StartType = %SERVICE_DEMAND_START% ErrorControl = %SERVICE_ERROR_NORMAL% ServiceBinary = %12%\HECIx64.sys LoadOrderGroup = Extended Base ;----------------------------------------------------------------------------- ; Common base for all drivers for Eventlog and TextModeFlags ; [winxp.EventLog] AddReg = winxp.AddEventLog.reg [winxp.AddEventLog.reg] HKR, , EventMessageFile, 0x00020000, %EventLogMessageDllPath_winxp% HKR, , TypesSupported, 0x00010001, 7 [winxpe.EventLog] AddReg = winxpe.AddEventLog.reg [winxpe.AddEventLog.reg] HKR, , EventMessageFile, 0x00020000, %EventLogMessageDllPath_winxpe% HKR, , TypesSupported, 0x00010001, 7 ; --------- Files ---------------------- [HECI_Files_Driver] HECI.sys,,,2 [HECIx64_Files_Driver] HECIx64.sys,,,2 ;--------- Strings Section --------------------------------------------------- [Strings] ;--------------------------------------------------------------------------------------------------- EventLogMessageDllPath_winxp = "%SystemRoot%\System32\netevent.dll;%SystemRoot%\System32\drivers\HECI.sys" EventLogMessageDllPath_winxpe = "%SystemRoot%\System32\netevent.dll;%SystemRoot%\System32\drivers\HECIx64.sys" Provider = "Intel" MfgName = "Intel" HECI_DeviceDesc = "Intel(R) Management Engine Interface " HECI_SvcDesc = "Intel(R) Management Engine Interface " Location = "Intel(R) Management Engine Interface" REG_SZ = 0x00000000 REG_MULTI_SZ = 0x00010000 REG_EXPAND_SZ = 0x00020000 REG_BINARY = 0x00000001 REG_DWORD = 0x00010001 REG_NONE = 0x00020001 SERVICE_KERNEL_DRIVER = 0x00000001 SERVICE_FILE_SYSTEM_DRIVER = 0x00000002 SERVICE_ADAPTER = 0x00000004 SERVICE_RECOGNIZER_DRIVER = 0x00000008 SERVICE_BOOT_START = 0x0 SERVICE_SYSTEM_START = 0x1 SERVICE_AUTO_START = 0x2 SERVICE_DEMAND_START = 0x3 SERVICE_DISABLED = 0x4 SERVICE_ERROR_IGNORE = 0x00000000 SERVICE_ERROR_NORMAL = 0x00000001 SERVICE_ERROR_SEVERE = 0x00000002 SERVICE_ERROR_CRITICAL = 0x00000003 FLG_ADDREG_NOCLOBBER = 0x00000002 FLG_ADDREG_DELVAL = 0x00000004 FLG_ADDREG_APPEND = 0x00000008 FLG_ADDREG_KEYONLY = 0x00000010 FLG_ADDREG_OVERWRITEONLY = 0x00000020 FLG_ADDREG_64BITKEY = 0x00001000 FLG_ADDREG_KEYONLY_COMMON = 0x00002000 FLG_ADDREG_32BITKEY = 0x00004000 SPSVCINST_STOPSERVICE = 0x00000200 SPSVCINST_DELETEEVENTLOGENTRY = 0x00000004Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.