ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ ACCTON TECHNOLOGY CORPORATION ³
³ ETHERPOCKET PC-NFS SOFTWARE INTERFACE DRIVER ³
³ INSTALLATION GUIDE ³
³ ³
³ 06/01/1991 VERSION 1.00 R02 ³
³ ³
³ Copyright 1989-1992 ACCTON Technology Corporation ³
³ All rights reserved. ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
You have just opened the PC-NFS READ.ME file. It contains
instructions on the PC-NFS Software Interface Driver installation
for the following EtherPocket lan adapters :
ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ Product Name Product Number ³
ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´
³ EtherPocket-10T EN2201 ³
³ EtherPocket-CX EN2202 ³
³ EtherPocket-Duo EN2209 ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
Using any ACCTON EtherPocket-CX/10T/Duo (EN2202/EN2201/EN2209) lan
adapter and the ACCTON PC-NFS Software Interface Driver, you can run the
Sun MicroSystems PC-NFS on your PC.
The following files will be used in this installation:
Files Contents
-------- --------------------------------------------------------
PCNFSIF.SYS PC-NFS Software Interface Driver.
PEPKTDRV.COM ACCTON Packet Driver for EtherPocket-CX/10T lan adapter.
The steps to install the program are as follows:
1. Start the installation process by following the procedure
described in the PC-NFS Manual for installing the Sun
Microsystems PC-NFS program in your PC's hard disk. When
asked to identify the type of network interface card you
are using, select "WD8003" from the list. Likewise, when
asked for the interrupt level and the base I/O address
select:
Interrupt Level (IRQ) 3
I/O Base Address 300h
2. Copy the following files to the \NFS directory of your
hard disk:
PCNFSIF.SYS
PEPKTDRV.COM
3. Modify the CONFIG.SYS file to include the following:
DEVICE=C:\ANSI.SYS
DEVICE=C:\NFS\PCNFS.SYS
DEVICE=C:\NFS\SOCKDRV.SYS
DEVICE=C:\NFS\PCNFSIF.SYS
LASTDRIVE=V
4. Create or modify an existing AUTOEXEC.BAT file to include
the following:
C:\NFS\PEPKTDRV 98
SET PATH = C:\; C:\NFS
SET TZ=CST6
SET NFSDRIVE=C
PRT *
NFSRUN
For your system to work properly, make sure that the
C:\NFS\PEPKTDRV 98 command line is placed before the NFSRUN
command line. For more information on the PEPKTDRV.COM
program, refer to the READ.ME file of the ACCTON Packet
Driver.
Allowable values for the software interrupt vector range from
96 to 128. The default software interrupt vector value is 98.
5. Reboot the PC and start the PC-NFS program. You may now run
PC-NFS commands on your PC to allow communication with other
computers on the network that use the TCP/IP protocol.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.