Date Version Note ===============+========+======================================================================================== 2007.10.08 041 1. Update Rx Status Descriptor definition. 2. Fix Protection Mode bug 3. Fix Fragmentation Issue. 4. support HW Radio On/Off. 5. Fix Sw Channel race condition. 6. support Mini-PCIe Card LED. 7. [Vista] support Active State Power Management. 8. Support Rate Adaptive, Antenna Diversity, Dynamic Initial Gain. 9. It's the first released beta version. 2007.10.13 042 1. Released for CCX4 test. 2007.10.18 043 1. Released for WHQL test. 2007.10.24 044 1. Rewrite Hw Key Content from low power state to active in order to avoid reset by Hw. 2007.10.26 045 1. [Vista] Fix out of Tx resource in SendRecv_Stress item of WHQL. 2007.11.07 046 1. Update formula of signal strength. 2007.11.16 047 1. Fix WPA2 Pre-Auth. PMK sometimes catche failed. 2. Support Inactive Power Save. 2007.11.29 048 1. For Power Consumption in disconnect situation. 2007.12.12 049 1. Fix incorrect memory copy to pass Scan_Cmn DTM test item. 2. Support Tx High Power Mechaniam. 2007.12.25 050 1. Fix Hot Plug then system crash issue. 2007.12.27 051 1. Improve Power Consumption in leisure time of connection. 2008.01.09 052 1. Fix disconnect from system sleep to awake. 2. Revise Antenna defination. 2008.01.16 053 1. Revise power save algorithm to avoid that download file might spend very long time or disconnect. 2008.01.23 054 1. Support Customized ID. 2008.02.25 055 1. Revise Rate Adaptive Mechanism to improve long-range connection. 2008.03.13 056 1. Use Hw/Sw Rx evaluation ro improve antenna diversity Mechanism. 2. Support rate Adaptive in B mode. 2008.04.01 057 1. Released for WHQL test. 2. [Vista] Fix the bug of RF on/off functionality between mobility center and HW options. 2008.04.21 058 1. [Vista] Fix WPS Feature Pack issue under Vista SP1 2008.04.23 059 1. support mesh network. 2008.04.24 060 1. Revise connect request for WPS Feature Pack 2008.06.06 061 1. Revise site survey behavior after the system is resuming. 2008.06.25 062 1. [Vista] Set Multicast_list to get DHCP correctly in DTM. 2008.06.27 063 1. [MacOS] Revise coding style for endian free. 2. Fix incorrect Rx FIFO status. 2008.07.01 064 1. Released for WLK 1.2 2. Add global domain which follow the country code, otherwise active scan from ch1~11 and passive scan from ch12~14 2008.07.08 065 1. Revise switch channel procedure to fix disconnect issue under losse traffic. 2. Revise BaseBand parameter to avoid registers access failed then NIC disconnect form AP. 2008.07.09 066 1. Revise BaseBand parameter for all dynamic mechanism to aviod race condition. 2008.07.10 067 1. Fix System WHQL PCIHCT test failure. 2. Revise Dynamic Initial Gain algorithm in PowerSave situation. 2008.08.04 068 1. Support "World Wide 13" Domain. 2. Fix timing issue that switch channel might fail in power state transitions from lower power state to fully power. 3. Imporved Adhoc Mode throughput. 4. Fix empty SiteSurvey list in Adhoc Mode. 2008.08.12 069 1. Revise Adhoc WPA2-AES BSOD issue. 2. Revise GPIO Control function. 2008.08.16 070 1. [Vista] Fix Adhoc IPv6 ping failed. 2. Some AP would deauth its client under losse traffic. 2008.08.22 071 1. [Vista] Fix Vista Mobile Center icon disabled issue 2. [XP] Fix WPA-TKIP Adhoc ping failed in new verision of Windows Zero Config. 3. Using System PowerProfile to adjust the power consumption. 4. [Vista] Revise boot time. 2008.09.08 072 1. Revise IBSS rate adaptive. 2008.09.17 073 1. Improve Power Consumption under Hw Radio Off . 2. Improve Power Consumption on Internet. 3. Support MacOS Driver. 2008.10.14 074 1. Fix fail to connect WEP AP by using new utility. 2008.11.06 075 1. Improvement throughput in high temperature. 2008.11.07 076 1. Improve Power Consumption under Hw Radio Off further. 2008.11.12 077 1. Customize 802.11d request. 2008.11.17 078 1. Fix 802.11d customization bug. 2008.11.24 079 1. Fix deranged supplicant from system sleep to awake. 2008.11.25 080 1. Revise LED behavior in HW Radio off situation. 2008.11.25 081 1. Customise INF file 2008.12.04 082 1. Customize GPIO polling behavior. 2008.12.09 083 1. Improve battery life under Hw Radio Off. 2008.12.09 084 1. Customise INF file. 2008.12.29 085 1. [Vista] Support high-rate DSSS (HRDSSS) PHY type. 2. Fix LED behavior during OS reboot. 2009.01.06 086 1. Revise antenna related OIDs to support antenna test utility. 2009.01.09 087 1. Fix WPA2-AES compatible issue that getting a invaild IP address during reusme from S3. 2009.01.13 088 1. Customise LED behavior for specific ID. 2009.02.05 089 1. Customise Power Management behavior. 2009.02.12 090 1. Fix disconnect from S4 issue on specific platform. 2009.02.17 091 1. Fix compatibility issue with specific AP. 2009.02.24 092 1. Fix power save misstated under unassocaited mode. 2009.03.02 093 1. [Vista] Fix AP mode misstated. 2009.03.17 094 1. [Vista] Revise Tx behavior to fit timing of SMB2 network file system on VistaX64 SP1. 2009.03.24 095 1. Recover modifications of WLK1.3. 2009.04.16 096 1. [XP] Fix network bridge issue that can't operate properly. 2. [Vista] Fix ping failed issue when Vista connect XP ad-hoc. 3. [Vista] Fix HW Radio off still can site survey issue. 2009.04.22 097 1. Adjust RfOff voltage. 2. Adjust fair beacon distribution. 2009.05.06 098 1. Customise LED behavior for specific ID. 2. Fix LED behavior when turn off and on HW Radio. 2009.05.08 099 1. [Vista] Revise PHY¡¦s software power state. 2009.05.21 100 1. Revise RF off state indicated behavior. 2. [Vista] Revise for WLK1.4 on VistaX64. 3. Fix Vista multicast packet received issue. 2009.06.16 101 1. Released for Win7 WHQL test. 2009.06.18 102 1. Customise LED behavior for specific ID. 2009.06.24 103 1. [Win7] Customise Power Save behavior for specific ID. 2009.07.01 104 1. [Win7] Fix compatibility issue with specific AP. 2. [Win7] Revise for WLK1.4. 2009.08.12 105 1. [Win7] Shorten boot time. 2. [Win7] Fix empty SiteSurvey list when connection failed. 2009.08.31 106 1. Improve Adhoc mode packet loss rate. 2009.09.24 107 1. [Win7] Fix phy's power state indication. 2009.10.15 108 1. Fix PCI link control on specific platform. 2009.10.28 109 1. Fix power save state machine when wakeup form S3/S4. 2. [Win7] Fix Extension port can't be connected when default port disconnect. 2010.04.01 110 1. Released for WLK1.5 WHQL test. 2. Fix Hw Radio Off behavior during OS reboot/wakeup or device disable/enable.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.