Mos24Ser_QUADPORT.inf Driver File Contents (MCS7840_7820_7810_Windows_32bit_Driver_v2.0.2.0_WHCK_Binary.zip)

;;/*********************************************************************
;;
;;  (c) Copyright ASIX Electronics Corporation
;;
;;  ASIX 7840/7820/7810 - ASIX High-Speed USB MultiSerial Device Driver for 1/2/4 serial ports
;;
;;  Mos24Ser.inf: Installation Script for ASIX 7840/20/10 - Serial Port Device
;;  Target OS : Windows OS 32-Bit
;;
;;*********************************************************************/

[version]
Signature="$WINDOWS NT$"
Class=Ports
ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
Provider=%ProviderName%
DriverVer=10/03/2012,2.0.2.0
CatalogFile=Mos24Ser_QUADPORT.cat

[DestinationDirs]
DefaultDestDir  = 11        ;LDID_SYS
CoClass.CoInstallers_CopyFiles=12       ;DIRID_DRIVERS

[SourceDisksNames]
2=%MosQuadPort.DiskName%,,,

[SourceDisksFiles]
;; NOTHING 

;===============================
; Driver Installation
;===============================
[Manufacturer]
%MfgName%=MosQuadPortsList

;
; Manufacturer Name Section
;
[MosQuadPortsList]
%MosQuadPort.ComPortName%=ComPort.NT,QUADPORT\QUAD_SERIAL_INTERFACE


;----------------------------------------
; COM Port Install
;----------------------------------------

[ComPort.NT]
AddReg=ComPort.NT.AddReg

[ComPort.NT.AddReg]
HKR,,DevLoader,,*ntkern
HKR,,NTMPDriver,,mos24ser_QUADPORT.sys

;RegMaxTxPacketSize is valid 32 - 512K
HKR,, "RegMaxTxPacketSize", 0x10001, 512

;RegMaxTxPacketSize is valid 64 - 512K
HKR,, "RegMaxRxPacketSize", 0x10001, 1024

;RegUsbReadMaxPolls is valid 1 - 10
HKR,, "RegUsbReadMaxPolls", 0x10001, 1

;RegUsbStatusMaxPolls is valid 1 - 10
HKR,, "RegUsbStatusMaxPolls", 0x10001, 1

;RegEnableHwFlowControl is valid 0 - 1
HKR,, "RegEnableHwFlowControl", 0x10001, 0

HKR,, "DeviceControlReg0",	 0x10001, 01
HKR,, "DeviceControlReg1",	 0x10001, 05
HKR,, "DeviceControlReg2",	 0x10001, 36
HKR,, "MaskBaudsLowToHigh",	 0x10001, 0
HKR,, "WriteDCR",			 0x10001, 1
HKR,, "ControlReg",			 0x10001, 0
HKR,, "RS485EN",			 0x10001, 0
HKR,, "IrDA",			 0x10001, 0
HKR,, "DLL"	,		 0x10001, 0
HKR,, "DLM"	,		 0x10001, 0
HKR,, "DivisorValueToSync1200baud",0x10001, 0x5f
HKR,, "CLK_SEL_REG",		 0x10001, 0
HKR,, "RxSAMP",			 0x10001, 7
HKR,, "ZLP",			 0x10001, 255
HKR,, "ZLP_ENABLE",		 0x10001, 1
HKR,, "THR1",			 0x10001, 0
HKR,, "THR2",			 0x10001, 1
HKR,, "ICG",			 0x10001, 0
HKR,, "EN450MODE",		 0x10001, 0
HKR,, "CUSTNAME", , %CUSTNAME%
HKR,, "VID_PID_CUSTOMER", , %VID%"_"%PID%"_"%CUSTNAME%

HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
HKR,,EnumPropPages32,,"Mos24SerPropPage_QUADPORT.dll,MosUSBSerPropPageProvider"
HKR,,PortSubClass,1,01

[ComPort.NT.HW]
AddReg=ComPort.NT.HW.AddReg

;[ComPort.NT.Service.AddReg]
;DebugLevel is valid 0 - 3
;HKR,"Parameters", "DebugLevel", 0x10001, 0
;HKR,"Parameters", "EXT_INTERRUPT_VAR", 0x10001, 0
;HKR,"Parameters", "WaitCount", 0x10001, 0
;HKR,"Parameters", "ClockStartReg", 0x10001, 0
;HKR,"Parameters", "ClockMultiReg", 0x10001, 16
;HKR,"Parameters", "PLL_N_REGs", 0x10001, 8
;HKR,"Parameters", "PLL_M_REGs", 0x10001, 1
;HKR,"Parameters", "CLK_MUX_REGs", 0x10001, 0
;HKR,"Parameters", "EXTERNAL_CLOCK", 0x00010000 , "12.0"
;HKR,"Parameters", "SafeRemovalIcon", 0x10001, 1

[ComPort.NT.HW.AddReg]
HKR,,"UpperFilters",0x00010000,"serenum"
HKR,, "VID_PID_CUSTOMER", , %VID%"_"%PID%"_"%CUSTNAME%

[ComPort.NT.Services]
AddService=mos24ser_QUADPORT,2,ComPort.NT.AddService,USBSER_Event_Log_AddService
AddService= Serenum,,Serenum_Service_Inst

[ComPort.NT.CoInstallers]
CopyFiles=CoClass.CoInstallers_CopyFiles
AddReg = CoClass.CoInstallers_AddReg

[CoClass.CoInstallers_AddReg]
HKR,,CoInstallers32,0x00010000,"QuadCoInst_QUADPORT.dll,CoInstaller"

[CoClass.CoInstallers_CopyFiles]
;; NOTHING TO COPY

[ComPort.NT.AddService]
DisplayName    = %CUSTNAME%%mos24ser.ServiceName%
ServiceType    = 1           ; SERVICE_KERNEL_DRIVER
StartType      = 3           ; SERVICE_DEMAND_START
ErrorControl   = 0           ; SERVICE_ERROR_IGNORE
ServiceBinary  = %12%\mos24ser_QUADPORT.sys
;LoadOrderGroup = Base
;AddReg=ComPort.NT.Service.AddReg

; -------------- Serenum Driver install section
[Serenum_Service_Inst]
DisplayName    = %Serenum.SVCDESC%
ServiceType    = 1               ; SERVICE_KERNEL_DRIVER
StartType      = 3               ; SERVICE_DEMAND_START
ErrorControl   = 1               ; SERVICE_ERROR_NORMAL
ServiceBinary  = %12%\serenum.sys
LoadOrderGroup = PNP Filter

; -------------- USBSER Event Viewer Log Section
[USBSER_Event_Log_AddService]
AddReg = USBSER_Event_Log_AddReg

[USBSER_Event_Log_AddReg]
HKR,,EventMessageFile,0x00020000,"%%SystemRoot%%\System32\IoLogMsg.dll;%%SystemRoot%%\System32\drivers\mos24ser_QUADPORT.sys"
HKR,,TypesSupported,0x00010001,7 


;----------------------------------------------
; User readable strings
;----------------------------------------------
[Strings]
ProviderName="ASIX Electronics Corporation."
MfgName="ASIX Electronics Corporation."
DiskName="High-Speed USB MultiSerial Compound Device Installation Disc"
MosQuadComp.DevName="High-Speed USB MultiSerial Compound Device"
mos24ser.ServiceName=" High-Speed USB MultiSerial Device Service"
PortsClassName = "Ports (COM)"
MosQuadPort.ComPortName="High-Speed USB Serial Port"
Serenum.SVCDESC = "Serenum Filter Driver"
Enumerator = "Serial Enumerator"
MosQuadPort.DiskName = "Install disk"
CUSTNAME = "QUADPORT"
VID = "9710"
PID = "7840"

;-----------------------
; END OF FILE
;-----------------------
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 1.18