Readme.txt Driver File Contents (AX88772B_772A_772_Win8_64bit_Driver_v3.16.1.0_WHQL.zip)

//==============================================================================
// ASIX AX88772/AX88772A/AX88772B Windows 8 driver
//
// This document describes the driver's configurable parameters.
//==============================================================================

1. SpeedDuplex: Set the Ethernet link speed.
   -AutoSense:    Auto detect the Ethernet link speed
   -10Half:       Set the Ethernet works on 10HD
   -10Full:       Set the Ethernet works on 10FD
   -100Half:      Set the Ethernet works on 100HD
   -100Full:      Set the Ethernet works on 100FD

2. NetworkAddress : Allows user to set a MAC address of the device or use the 
                    device default address.

3. FlowControl: Configure flow control advertised capabilities
   -Disabled       Disable flow control
   -TxEnabled      Enable transmit flow control
   -RxEnabled      Enable receive flow control
   -RxTxEnabled    Enable transmit and receive flow control

4. WakeOnLinkChange: Wake up the computer when device detects Ehernet link Changed
   -Disabled       Disable WakeOnLinkChange function
   -Enabled        Enable WakeOnLinkChange function

5. Packet Priority & VLAN: Enable or disable the ability to insert the 802.1Q
                           priority and VLAN tags into the transmit packets.
   -Packet Priority & VLAN Disabled  Disable to insert the 802.1Q priority and VLAN tag
   -Packet Priority Enabled          Only enable to insert the 802.1Q priority tag
   -VLAN Enabled                     Only enable to insert the 802.1Q VLAN tag
   -Packet Priority & VLAN Enabled   Enable to insert the 802.1Q priority and VLAN tag

6. VLAN ID: If user set a valid VLAN ID, the driver inserts the VLAN tag with 
            this VLAN ID into the transmit packets and device will filter the
            received packets.

7. WakeOnMagicPacket: Wake up the computer when device receives a Magic Packet
   -Disabled       Disable WakeOnMagicPacket function
   -Enabled        Enable WakeOnMagicPacket function

8. WakeOnPattern: Wake up the computer when device receives a packet that matches a
                  specified pattern
   -Disabled       Disable WakeOnPattern function
   -Enabled        Enable WakeOnPattern function

9. SelectiveSuspend: Allows NDIS to suspend an idle AX88772B network adapter by
                     transitioning the adapter to a low-power state
   -Disabled       Disable SelectiveSuspend function
   -Enabled        Enable SelectiveSuspend function

10. SSIdleTimeout: Selective suspend idle time-out in units of seconds

11. TCPChecksumOffloadV4: Enable or disable the device to calculate the
                         TCP checksum of the transmit IPv4 packets and
                         check the TCP checksum of the received IPv4
                         packets.
   -Disabled       Disable the TCP Checksum Offload
   -TxEnabled      Enable the TCP Checksum Offload for transmit packets
   -RxEnabled      Enable the TCP Checksum Offload for received packets
   -RxTxEnabled    Enable the TCP Checksum Offload for transmit and received packets

12. UDPChecksumOffloadV4: Enable or disable the device to calculate the
                         UDP checksum of the transmit IPv4 packets and
                         check the UDP checksum of the received IPv4 packets.
   -Disabled       Disable the UDP Checksum Offload
   -TxEnabled      Enable the UDP Checksum Offload for transmit packets
   -RxEnabled      Enable the UDP Checksum Offload for received packets
   -RxTxEnabled    Enable the UDP Checksum Offload for transmit and received packets

13. TCPChecksumOffloadV6: Enable or disable the device to calculate the
                          TCP checksum of the transmit IPv6 packets and
                          check the TCP checksum of the received IPv6 packets.
   -Disabled       Disable the TCP Checksum Offload
   -TxEnabled      Enable the TCP Checksum Offload for transmit packets
   -RxEnabled      Enable the TCP Checksum Offload for received packets
   -RxTxEnabled    Enable the TCP Checksum Offload for transmit and received packets

14. UDPChecksumOffloadV6: Enable or disable the device to calculate the
                          UDP checksum of the transmit IPv6 packets and
                          check the UDP checksum of the received IPv6 packets.
   -Disabled       Disable the UDP Checksum Offload
   -TxEnabled      Enable the UDP Checksum Offload for transmit packets
   -RxEnabled      Enable the UDP Checksum Offload for received packets
   -RxTxEnabled    Enable the UDP Checksum Offload for transmit and received packets

15. IPChecksumOffloadV4: Enable or disable the device to calculate the IP 
                         checksum of the transmit IPv4 packets and check the
                         IP checksum of the received IPv4 packets.
    -Disabled      Disable the IP Checksum Offload
    -TxEnabled     Enable the IP Checksum Offload for transmit packets
    -RxEnabled     Enable the IP Checksum Offload for received packets
    -RxTxEnabled   Enable the IP Checksum Offload for transmit and received packets

16. ArpOffload: When enable this ability, the device will reply the ARP request
                packet when computer is suspending. This ability is activated only
                if WOL is enabled.
    -Disabled      Disable ARP Offload
    -Enabled       Enable ARP Offload

17. NSOffload: When enable this ability, the device will reply the neighbor
               solicitation packet when computer is suspending. This ability is 
               activated only if WOL is enabled.
    -Disabled      Disable NS Offload
    -Enabled       Enable NS Offload

18. AutoDetach: Enable or disable AutoDetach ability. if AutoDetach is enabled, 
                3 seconds later after Ethernet cable was unpluged, the device will
                be detached from USB.
    -Disabled      Disable AutoDetach
    -Enabled       Enable AutoDetach
    -Use EEPROM Setting Disable or enable AutoDetach accoring to the EEPROM setting

19. MaskTimer: If wake up ability is enabled, the wake up function will delay this
               time to active.
    -0,4,8,12,16,20,24,28 seconds

20. WolLinkSpeed: Set the Ethernet link speed when device sleeps if wake up 
                  ability is enabled.
    -10 Mbps First       The Ethernet link speed works on 10 Mbps first if available
    -Use EEPROM Setting  Use EEPROM setting to set Ethernet link speed

21. WolPatterbType: Select the Wake-Up Frame patterns
   -Dynamic        Use the Wake-up frame patterns provided by Windows
   -Hardcode       Use the fixed wake-up frame patterns
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web3, load: 1.87