readme.txt Driver File Contents (RSTe_35_V3501092_V3501096_VistaWin7_8.zip)

ÿþ************************************************************

************************************************************

* Installation Readme for Intel(R) Rapid Storage

* Technology enterprise (Intel(R) RSTe).

* Refer to the system requirements for the operating

* systems supported by Intel(R) Rapid Storage Technology

* enterprise.

* This document makes references to products developed by

* Intel(R). There are some restrictions on how these products

* may be used, and what information may be disclosed to

* others. Please read the Disclaimer section at the bottom

* of this document, and contact your Intel(R) field

* representative if you would like more information.

************************************************************

* Intel(R) is making no claims of usability, efficacy or

* warranty. The INTEL(R) SOFTWARE LICENSE AGREEMENT contained

* herein completely defines the license and use of this

* software.

************************************************************

* CONTENTS OF THIS DOCUMENT

************************************************************

1. Overview

2. System Requirements

3. Language Support

4. Installing the Software

5. Verifying Installation of the Software

6. Advanced Installation Instructions

7. Identifying the Software Version Number

8. Uninstalling the Software

9. Entering the Pre-boot User Interface

Disclaimer

Intel(R) Software License Agreement

************************************************************

* 1. OVERVIEW

************************************************************

Intel(R) Rapid Storage Technology enterprise (Intel(R) RSTe) is

designed to provide functionality for the following Storage

Controllers:

SCU Controllers:

- Intel(R) C600 series chipset SAS RAID (SATA mode)

Controller

- Intel C600 series chipset SAS RAID Controller

SATA RAID Controllers:

- Intel(R) C600 series chipset SATA RAID Controller

SATA AHCI Controllers:

- Intel(R) C600 series chipset SATA AHCI Controller

************************************************************

* 2. SYSTEM REQUIREMENTS

************************************************************

A. The system must be running on one of the following

operating systems:

- Microsoft Windows* 7

- Microsoft Windows* 7 x64-bit Edition

- Microsoft Vista* SP1

- Microsoft Vista* SP1 x64-bit Edition

- Microsoft Windows* XP SP3 x64-bit Edition

- Microsoft Windows* Server 2008 R2**

- Microsoft Windows* Server 2008**

- Microsoft Windows* Server 2008 x64-bit Edition**

- Microsoft Windows* Server 2003 R2 SP2 x64-bit Edition**

* Other names and brands may be claimed as the property

of others.

** Applies to all editions (for example 'Datacenter',

'Web', etc.). Intel(R) RSTe, however, is only validated

against the 'Enterprise' edition.

B. The following operating systems are not supported:

Any operating system not listed in section 2.A.

C. The system should contain, at the very least, the minimum

system memory required by the operating system.

************************************************************

* 3. LANGUAGE SUPPORT

************************************************************

Below is a list of the languages (and their abbreviations)

for which the Intel(R) Rapid Storage Technology enterprise

software has been localized. The language code is listed in

parentheses preceding each language.

(0401) ARA: Arabic (Saudi Arabia)

(0804) CHS: Chinese (Simplified)

(0404) CHT: Chinese (Traditional)

(0405) CSY: Czech

(0406) DAN: Danish

(0413) NLD: Dutch

(0409) ENU: English (United States)

(040B) FIN: Finnish

(040C) FRA: French (International)

(0407) DEU: German

(0408) ELL: Greek

(040D) HEB: Hebrew

(040E) HUN: Hungarian

(0410) ITA: Italian

(0411) JPN: Japanese

(0412) KOR: Korean

(0414) NOR: Norwegian

(0415) PLK: Polish

(0416) PTB: Portuguese (Brazil)

(0816) PTG: Portuguese (Standard)

(0419) RUS: Russian

(0C0A) ESP: Spanish

(041D) SVE: Swedish

(041E) THA: Thai

(041F) TRK: Turkish

************************************************************

* 4. INSTALLING THE SOFTWARE

************************************************************

A. General installation notes:

1. To install Intel(R) Rapid Storage Technology enterprise,

double-click on the self-extracting and self-installing

setup file and answer all prompts presented.

2. By default, all installed files (readme.txt, help,

etc.) are copied to one of the following paths:

<bootdrive>\Program Files\Intel\Intel(R) Rapid Storage Technology enterprise

<bootdrive>\Program Files (x86)\Intel\Intel(R) Rapid Storage Technology enterprise

B. Windows Automated Installer* installation from hard drive

or CD-ROM:

Note: This method will install the drivers for both the SAS

RAID and SATA RAID controllers.

1. Download the Intel(R) Rapid Storage Technology enterprise

setup file and double-click to self-extract and to

begin the setup process.

2. When the 'Welcome' window appears, click 'Next' to

continue.

3. When the 'Uninstallation Warning' window appears,

please read the information provided, then click 'Next'

to continue.

4. When 'Software License Agreement' window appears, if

you agree to these terms, click 'Yes' to continue.

Otherwise, click 'No' to cancel the installation.

5. When the 'Readme File Information' window appears,

please read the information provided, then click

'Next' to continue.

6. The 'Setup Progress' window appears and displays the

actions being performed for the installation.

7. When the Windows Automated Installer*

'Setup Is Complete' window appears, the following

options display:

a. Make sure any open documents are saved, select

'Yes, I want to restart my computer now.', then click

'Finish'.

b. Or select 'No, I want to restart later', then click

'Finish'.

C. Driver installation during Windows* XP x64-bit Edition

or Windows* Server 2003 Edition using the 'F6 Method'+:

Note: This procedure will install only the software

necessary for Windows* to install and be functional.

To install the remaining software, it is necessary to

use the installation procedure outlined in Section 4.B

once Windows* has completed it's installation.

1. Obtain the necessary files by one of two methods:

a. Download the latest Intel(R) RSTe F6 drivers from

www.intel.com and extract the contents from the

.zip file.

b. Extract the files from the installation package.

See Section 6.B for instructions on extracting the

files.

2. Create a floppy (or USB key) containing the following

files in the root directory:

a. The files required if loading a driver for the SATA

RAID controller is desired:

- rsteahci.inf

- iaAHCI.inf

- rsteahci.sys

- iaahci.cat

- rsteahci_x64.cat (rsteahci_x86.cat if 32 bit install)

- rstfltr.sys

- txtsetup.oem

b. The files required if loading a driver for the SAS

RAID controller is desired:

- rstescu.inf

- rstescu.sys

- rstescu1.sys

- rstescu_x64.cat (rstescu_x86.cat if 32 bit install)

- rstfltr.sys

- txtsetup.oem

3. At the beginning of the operating system installation,

press F6 to install a third party SCSI or RAID driver:

- When prompted, select 'S' to Specify Additional Device.

4. When prompted, insert the media (floppy or USB key)

that was created in step 2 and press 'Enter'.

5. At this point you should be presented with a selection

for one of the controllers listed in the Overview of

this document (Section 1) depending on your hardware

version and configuration.

6. Highlight the selection that is appropriate for the

hardware in your system and press 'Enter'.

7. Press 'Enter' again to continue. Leave the floppy disk

in the system until the next reboot as the software

will need to be copied from the floppy disk again when

setup is copying files.

+ The 'F6 Method' refers to the key sequence used during

Windows* XP or Windows* Server 2003 installation to signal

that a third party device driver needs to be loaded.

D. Driver installation during Microsoft Windows* 7, Vista*,

or Server 2008 Installation:

Note: This procedure will install only the software

necessary for Windows* to install and be functional.

To install the remaining software, it is necessary to

use the installation procedure outlined in Section 4.B

once Windows* has completed it's installation.

1. Extract all driver files from the installation package.

See Section 6.B for instructions on extracting the

files.

2. Add files listed in Section 4.C.2 to a USB key.

3. Begin the Windows* installation, following the normal

sequence of events.

4. When the 'Where do you want to install Windows?' window

displays, plug in your USB key and click 'Load Driver'

at the bottom left hand side of the window.

5. When the 'Load Driver' dialog window displays, click

'Browse'.

6. When the 'Open' dialog window displays, navigate to the

location of the installation files, click 'OK'.

7. At this point, you should be presented with a selection

for one of the controllers listed in the Overview

of this document (Section 1), being dependent on your

hardware version and configuration.

8. Select the controller that is appropriate for the

hardware in your system and click 'Next'.

9. Proceed with the selection of your installation disk

and complete the Windows* installation.

************************************************************

* 5. VERIFYING INSTALLATION OF THE SOFTWARE

************************************************************

A. If installed via the Windows* Automated Installer:

1. From the Windows* desktop, at the bottom left corner

select 'Start' -> 'All Programs' -> 'Intel'.

2. Locate and select

'Intel(R) Rapid Storage Technology enterprise'.

3. The Intel(R) Rapid Storage Technology enterprise

application should launch.

4. If the application does not launch, the

Intel(R) Rapid Storage Technology enterprise driver was

not installed properly and setup needs to be run again.

B. If installed during Windows* XP x64-bit Edition

or Windows* Server 2003 Edition Installation.

1. From the 'Start' menu, select the 'Control Panel'.

2. Double-click the 'System' icon (you might first need to

select 'Switch to Classic View' to make the 'System'

icon available).

3. On the dialog window that opens, select the 'Hardware'

tab, then click 'Device Manager'.

4. On the dialog window that opens, expand the

'SCSI and RAID Controllers' entry.

5. Under 'SCSI and RAID Controllers' there should be at

least one of the following entries (depending on which

driver was installed):

- 'Intel(R) C600 Series Chipset SAS RAID (SATA Mode)

Controller'

- 'Intel(R) C600 Series Chipset SAS RAID Controller'

- 'Intel(R) C600 Series Chipset SATA RAID Controller'

C. If installed during Microsoft Windows* 7, Vista*,

or Server 2008 Installation:

1. From the 'Start' menu, select the 'Control Panel'.

2. On the dialog window that opens, double-click the

'Device Manager' icon (you may first need to select

either 'Small icons' or 'Large icons' from the

'View by:' entry at the top right corner of the window

for Microsoft Windows* 7 or Server 2008, or click

'Classic View' in the left pane for Windows* Vista, to

make the 'Device Manager' icon visible).

3. On the dialog window that opens, expand the

'Storage controllers' entry.

4. Under 'Storage controllers' there should be at least

one of the following entries (depending on which

driver was installed):

- 'Intel(R) C600 Series Chipset SAS RAID (SATA Mode)

Controller'

- 'Intel(R) C600 Series Chipset SAS RAID Controller'

- 'Intel(R) C600 Series Chipset SATA RAID Controller'

************************************************************

* 6. ADVANCED INSTALLATION INSTRUCTIONS

************************************************************

A. Available setup flags:

Presents a dialog showing all the supported setup flags.

-a

Extracts drivers and readme files.

-b

Reboots the system without prompting after the setup

completes.

-g <LCID>

Specifies the language of the setup dialogs (See section 3

for a table listing valid LCID values for supported

languages).

-nodrv

Does not install Intel(R) RSTe drivers.

-nogui

Does not create a start menu shortcut for the UI console.

-noservice

Does not install the Event Monitor Service.

-notray

Does not install the tray icon.

-overwrite

Ignores the overwrite warning.

-p <path>

Changes default directory location for application files.

-report <path>

Changes the default log path.

-s

Silent install (does not display any setup dialogs).

-ver

Displays driver versions.

Note: Flags and their parameters are not case-sensitive.

B. Extracting the necessary driver files for use during

Windows* installation:

Run the installation application with the -a and -p

flags.

Example: setup.exe -a -p c:\RSTe_files

All required driver files will be placed into

c:\RSTe_files

************************************************************

* 7. IDENTIFYING THE SOFTWARE VERSION NUMBER

************************************************************

A. Version of the software installed via the Windows*

Automated Installer:

1. From the Windows* desktop, at the bottom left corner

select 'Start' -> 'All Programs' -> 'Intel'.

2. Locate and select

'Intel(R) Rapid Storage Technology enterprise'.

3. When the Intel(R) Rapid Storage Technology enterprise

application launches, click 'Help'.

4. On the dialog window that opens, click 'About'.

5. The version of the driver is displayed at the bottom

of the window.

B. Version of the drivers on Windows* XP x64-bit Edition

or Windows* Server 2003 Edition:

1. From the 'Start' menu, select 'Control Panel'.

2. Double-click the 'System' icon (you might first need to

select 'Switch to Classic View' to make the 'System'

icon available).

3. On the dialog window that opens, select the 'Hardware'

tab, then click 'Device Manager'.

4. On the dialog window that opens, expand the

'SCSI and RAID Controllers' entry.

5. Under 'SCSI and RAID Controllers', there should be at

least one of the following entries (depending on which

drivers are installed):

- 'Intel(R) C600 Series Chipset SAS RAID (SATA Mode)

Controller'

- 'Intel(R) C600 Series Chipset SAS RAID Controller'

- 'Intel(R) C600 Series Chipset SATA RAID Controller'

- 'Intel(R) C600 Series Chipset SATA AHCI Controller'

6. Right click and select 'Properties' on one of the

entries listed under 'SCSI and RAID Controllers'.

7. On the dialog window that opens, click on the 'Driver'

tab and look for the entry 'Driver Version'.

C. Version of the drivers on Microsoft Windows* 7, Vista*,

or Server 2008.

1. From the 'Start' menu, select the 'Control Panel'.

2. On the dialog window that opens, double-click the

'Device Manager' icon (you may first need to select

either 'Small icons' or 'Large icons' from the

'View by:' entry at the top right corner of the window

for Microsoft Windows* 7 or Server 2008, or click

'Classic View' in the left pane for Windows* Vista, to

make the 'Device Manager' icon visible).

3. On the dialog window that opens, expand the

'Storage controllers' entry.

4. Under 'Storage controllers', there should be at least

one of the following entries (depending on which

driver are installed):

- 'Intel(R) C600 Series Chipset SAS RAID (SATA Mode)

Controller'

- 'Intel(R) C600 Series Chipset SAS RAID Controller'

- 'Intel(R) C600 Series Chipset SATA RAID Controller'

- 'Intel(R) C600 Series Chipset SATA AHCI Controller'

5. Right click and select 'Properties' on one of the

entries listed under 'Storage controllers'.

6. On the dialog window that opens, click on the 'Driver'

tab and look for the entry 'Driver Version'.

************************************************************

* 8. UNINSTALLING THE SOFTWARE

************************************************************

WARNING: The removal of the device driver components of the

Intel(R) RSTe software package may leave the system

inoperable and any data inaccessible. Before

attempting to remove any software, make sure all

data has been backed up. Please consult the

appropriate Microsoft Windows* documentation for

your operating system regarding procedures on

removing device drivers.

A. Uninstallation of non-driver components:

Non-driver components of Intel(R) RSTe software package

include the Intel(R) Control Center, 'Start' menu links,

help files, and Taskbar notifications. The removal of

this software will not affect system operability. The

ability to create, delete, or modify existing RAID volumes

created with the Intel(R) RSTe software from within

Microsoft Windows*, however, will not be available.

B. Microsoft Windows* XP x64-bit Edition or

Windows* Server 2003 Edition.

1. On the 'Start menu', select 'Control Panel'.

2. Click 'Add or Remove Programs'.

3. Locate and select

'Intel(R) Rapid Storage Technology enterprise'.

4. Click 'Remove'.

5. The uninstall will start. Follow any instructions

presented during this process.

C. Microsoft Windows* 7, Vista*, or Server 2008:

1. On the 'Start menu', select 'Control Panel'.

2. Click 'Uninstall a program'.

3. Locate and select

'Intel(R) Rapid Storage Technology enterprise'.

4. Right-click the application name, and then click

'Uninstall'.

5. The uninstall will start. Follow any instructions

presented during this process.

************************************************************

* 9. ENTERING THE PRE-BOOT USER INTERFACE

************************************************************

WARNING: An interface is provided to create and delete RAID

volumes before Windows* boots. It is possible to

render a system inoperable by use of this interface

and extreme caution is advised when in use.

Press 'CTRL-I' when the 'Intel(R) Rapid Storage Technology

enterprise' banner screen appears.

************************************************************

* DISCLAIMER

************************************************************

INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH

INTEL PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL

OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED

BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL'S TERMS AND

CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO

LIABILITY WHATSOEVER AND INTEL DISCLAIMS ANY EXPRESS OR

IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL

PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO

FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR

INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL

PROPERTY RIGHT.

UNLESS OTHERWISE AGREED IN WRITING BY INTEL, THE INTEL

PRODUCTS ARE NOT DESIGNED NOR INTENDED FOR ANY APPLICATION

IN WHICH THE FAILURE OF THE INTEL PRODUCT COULD CREATE A

SITUATION WHERE PERSONAL INJURY OR DEATH MAY OCCUR.

Intel may make changes to specifications and product

descriptions at any time, without notice. Designers must not

rely on the absence or characteristics of any features or

instructions marked "reserved" or "undefined". Intel

reserves these for future definition and shall have no

responsibility whatsoever for conflicts or incompatibilities

arising from future changes to them. The information here is

subject to change without notice. Do not finalize a design

with this information.

************************************************************

* INTEL(R) SOFTWARE LICENSE AGREEMENT

************************************************************

The products described in this document may contain design

defects or errors known as errata which may cause the

product to deviate from published specifications. Current

characterized errata are available on request.

Contact your local Intel sales office or your distributor

to obtain the latest specifications and before placing your

product order.

Copies of documents which have an order number and are

referenced in this document, or other Intel literature, may

be obtained by calling 1-800-548-4725, or go to:

http://www.intel.com/#/en_us_01

Intel(R) is a trademark of Intel Corporation in the U.S.

and other countries.

* Other names and brands may be claimed as the property of

others

reserved.

INTEL SOFTWARE LICENSE AGREEMENT (OEM / IHV / ISV Distribution & Single User)

IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING.

Do not use or load this software and any associated materials (collectively, the "Software") until you have carefully read the following terms and conditions. By loading or using the Software, you agree to the terms of this Agreement. If you do not wish to so agree, do not install or use the Software.

Please Also Note:

* If you are an Original Equipment Manufacturer (OEM), Independent Hardware Vendor (IHV), or Independent Software Vendor (ISV), this complete LICENSE AGREEMENT applies;

* If you are an End-User, then only Exhibit A, the INTEL SOFTWARE LICENSE AGREEMENT, applies.

For OEMs, IHVs, and ISVs:

LICENSE. This Software is licensed for use only in conjunction with Intel component products. Use of the Software in conjunction with non-Intel component products is not licensed hereunder. Subject to the terms of this Agreement, Intel grants to you a nonexclusive, nontransferable, worldwide, fully paid-up license under Intel's copyrights to:

a) use, modify and copy Software internally for your own development and maintenance purposes; and

b) modify, copy and distribute Software, including derivative works of the Software, to your end-users, but only under a license agreement with terms at least as restrictive as those contained in Intel's Final, Single User License Agreement, attached as Exhibit A; and

c) modify, copy and distribute the end-user documentation which may accompany the Software, but only in association with the Software.

If you are not the final manufacturer or vendor of a computer system or software program incorporating the Software, then you may transfer a copy of the Software, including derivative works of the Software (and related end-user documentation) to your recipient for use in accordance with the terms of this Agreement, provided such recipient agrees to be fully bound by the terms hereof. You shall not otherwise assign, sublicense, lease, or in any other way transfer or disclose Software to any third party. You shall not reverse- compile, disassemble or otherwise reverse-engineer the Software.

Except as expressly stated in this Agreement, no license or right is granted to you directly or by implication, inducement, estoppel or otherwise. Intel shall have the right to inspect or have an independent auditor inspect your relevant records to verify your compliance with the terms and conditions of this Agreement.

CONFIDENTIALITY. If you wish to have a third party consultant or subcontractor ("Contractor") perform work on your behalf which involves access to or use of Software, you shall obtain a written confidentiality agreement from the Contractor which contains terms and obligations with respect to access to or use of Software no less restrictive than those set forth in this Agreement and excluding any distribution rights, and use for any other purpose.

Otherwise, you shall not disclose the terms or existence of this Agreement or use Intel's name in any publications, advertisements, or other announcements without Intel's prior written consent. You do not have any rights to use any Intel trademarks or logos.

OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies of the Software remains with Intel or its suppliers. The Software is copyrighted and protected by the laws of the United States and other countries, and international treaty provisions. You may not remove any copyright notices from the Software. Intel may make changes to the Software, or to items referenced therein, at any time and without notice, but is not obligated to support or update the Software. Except as otherwise expressly provided, Intel grants no express or implied right under Intel patents, copyrights, trademarks, or other intellectual property rights. You may transfer the Software only if the recipient agrees to be fully bound by these terms and if you retain no copies of the Software.

LIMITED MEDIA WARRANTY. If the Software has been delivered by Intel on physical media, Intel warrants the media to be free from material physical defects for a period of ninety (90) days after delivery by Intel. If such a defect is found, return the media to Intel for replacement or alternate delivery of the Software as Intel may select.

EXCLUSION OF OTHER WARRANTIES. EXCEPT AS PROVIDED ABOVE, THE SOFTWARE IS PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED WARRANTY OF ANY KIND, INCLUDING WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, OR FITNESS FOR A PARTICULAR PURPOSE. Intel does not warrant or assume responsibility for the accuracy or completeness of any information, text, graphics, links or other items contained within the Software.

LIMITATION OF LIABILITY. IN NO EVENT SHALL INTEL OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, LOST PROFITS, BUSINESS INTERRUPTION OR LOST INFORMATION) ARISING OUT OF THE USE OF OR INABILITY TO USE THE SOFTWARE, EVEN IF INTEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS PROHIBIT EXCLUSION OR LIMITATION OF LIABILITY FOR IMPLIED WARRANTIES OR CONSEQUENTIAL OR INCIDENTAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE OTHER LEGAL RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION.

TERMINATION OF THIS AGREEMENT. Intel may terminate this Agreement at any time if you violate its terms. Upon termination, you will immediately destroy the Software or return all copies of the Software to Intel.

APPLICABLE LAWS. Claims arising under this Agreement shall be governed by the laws of California, excluding its principles of conflict of laws and the United Nations Convention on Contracts for the Sale of Goods. You may not export the Software in violation of applicable export laws and regulations. Intel is not obligated under any other agreements unless they are in writing and signed by an authorized representative of Intel.

GOVERNMENT RESTRICTED RIGHTS. The Software is provided with "RESTRICTED RIGHTS." Use, duplication, or disclosure by the Government is subject to restrictions as set forth in FAR52.227-14 and DFAR252.227-7013 et seq. or their successors. Use of the Software by the Government constitutes acknowledgment of Intel's proprietary rights therein. Contractor or Manufacturer is Intel Corporation, 2200 Mission College Blvd., Santa Clara, CA 95052.

EXHIBIT "A"

INTEL SOFTWARE LICENSE AGREEMENT (Final, Single User)

IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING.

LICENSE. You may copy the Software onto a single computer for your personal, noncommercial use, and you may make one back-up copy of the Software, subject to these conditions:

1. This Software is licensed for use only in conjunction with Intel component products. Use of the Software in conjunction with non-Intel component products is not licensed hereunder.

2. You may not copy, modify, rent, sell, distribute or transfer any part of the Software except as provided in this Agreement, and you agree to prevent unauthorized copying of the Software.

3. You may not reverse engineer, decompile, or disassemble the Software.

4. You may not sublicense or permit simultaneous use of the Software by more than one user.

5. The Software may contain the software or other property of third party suppliers, some of which may be identified in, and licensed in accordance with, any enclosed "license.txt" file or other text or file.

OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies of the Software remains with Intel or its suppliers. The Software is copyrighted and protected by the laws of the United States and other countries, and international treaty provisions. You may not remove any copyright notices from the Software. Intel may make changes to the Software, or to items referenced therein, at any time without notice, but is not obligated to support or update the Software. Except as otherwise expressly provided, Intel grants no express or implied right under Intel patents, copyrights, trademarks, or other intellectual property rights. You may transfer the Software only if the recipient agrees to be fully bound by these terms and if you retain no copies of the Software.

EXCLUSION OF OTHER WARRANTIES EXCEPT AS PROVIDED ABOVE, THE SOFTWARE IS PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED WARRANTY OF ANY KIND INCLUDING WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, OR FITNESS FOR A PARTICULAR PURPOSE. Intel does not warrant or assume responsibility for the accuracy or completeness of any information, text, graphics, links or other items contained within the Software.

LIMITATION OF LIABILITY. IN NO EVENT SHALL INTEL OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, LOST PROFITS, BUSINESS INTERRUPTION, OR LOST INFORMATION) ARISING OUT OF THE USE OF OR INABILITY TO USE THE SOFTWARE, EVEN IF INTEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS PROHIBIT EXCLUSION OR LIMITATION OF LIABILITY FOR IMPLIED WARRANTIES OR CONSEQUENTIAL OR INCIDENTAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE OTHER LEGAL RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION.

SLAOEMISV1/RBK/01-21-00

LANGUAGE; TRANSLATIONS. In the event that the English language version of this Agreement is accompanied by any other version translated into any other language, such translated version is provided for convenience purposes only and the English language version shall control.

Download Driver Pack

readme.txt Driver File Contents (RSTe_35_V3501092_V3501096_VistaWin7_8.zip)

Recent Help Articles

More Popular Downloads

How To Update Drivers Manually

Recent Help Articles

More Popular Downloads