removdrv.txt Driver File Contents (RSTe_35_V3501092_V3501096_VistaWin7_8.zip)

ÿþ************************************************************

************************************************************

This document outlines the procedure for manually removing 

the Intel(R) Rapid Storage Technology driver software and

reconfiguring the system to use the native operating system

driver for managing storage controllers.



To complete this procedure, first print this document for use

as a reference. Then, complete Part 1 to determine the SATA

controller mode. Depending on the mode determined in Part 1, 

complete either Part 2A or 2B.



WARNING: Reconfiguring the system may result in the loss of 

data on any RAID volumes currently used by the system. Removing 

the Intel Rapid Storage Technology driver from the boot drive or 

bootable RAID volume may require reinstallation of the 

operating system. To preserve data integrity, back up 

all data before proceeding. 



************************************************************

* Part 1: Determining the System Mode

************************************************************



The steps for removing this software differ depending on 

whether the system is running in RAID or AHCI mode.



Determine the system's mode by identifying how the SATA 

controller is presented within the Device Manager by 

completing the steps below:



1.  On the Start menu, select Control Panel.



In Microsoft Windows XP*:



2.  Double-click 'System' from the Classic View.



3.  Select the 'Hardware' tab.



4.  Click 'Device Manager'.



5.  In the Device Manager window, look for an entry named 

    SCSI and RAID Controllers. If this entry is present, 

    expand it and look for one of the following controllers. 

    Otherwise, proceed to step 6:



In Microsoft Windows Vista* or higher:

    

2.  Double-click 'System' from the Classic View (or the 

    small or large icon view in Windows 7*).



3.  Select 'Device Manager' in the left pane.



4.  In the Device Manager window, look for an entry named 

    Storage Controllers. If this entry is present, expand it

    and look for one of the following controllers. Otherwise,

    proceed to step 6:



    - 'Intel(R) ICH7R/DH SATA RAID Controller'

      If the controller above is present, the system is an

      ICH7R/DH system in RAID mode. 

      Continue with Part 2A below.



    - 'Intel(R) ICH7MDH SATA RAID Controller'

      If the controller above is present, the system is an 

      ICH7MDH system in RAID mode. 

      Continue with Part 2A below.

    

    - 'Intel(R) Desktop/Workstation/Server Express Chipset SATA RAID Controller'

      If the controller above is present, the system is a 

      Desktop/Workstation/Server Express Chipset system in RAID mode.

      Continue with Part 2A below.   

    

    - 'Intel(R) Mobile Express Chipset SATA RAID Controller'

      If the controller above is present, the system is a 

      Mobile Express Chipset system in RAID mode. 

      Continue with Part 2A below.

  

    - If none of the controllers above are shown, then 

      the system is not running in RAID mode. 

      Continue with step 6 below.



6.  In the Device Manager window, look for an entry named 

    'IDE ATA/ATAPI controllers'.

    If this entry is present, expand it and look for one of

    the following controllers:



    - 'Intel(R) EP80579 SATA AHCI Controller'

      If the controller above is present, the system is an 

      EP80579 system in AHCI mode. 

      Continue with Part 2B below.



    - 'Intel(R) ICH7R/DH SATA AHCI Controller'

      If the controller above is present, the system is an

      ICH7R/DH system in AHCI mode. 

      Continue with Part 2B below.



    - 'Intel(R) ICH7M/MDH SATA AHCI Controller'

      If the controller above is present, the system is an 

      ICH7M/MDH system in AHCI mode. 

      Continue with Part 2B below.



    - 'Intel(R) ICH9R/DO/DH SATA AHCI Controller'

      If the controller above is present, the system is an 

      ICH9R/DO/DH system in AHCI mode. 

      Continue with Part 2B below.



    - 'Intel(R) ICH10R SATA AHCI Controller'

      If the controller above is present, the system is an 

      ICH10R system in AHCI mode. 

      Continue with Part 2B below.



    - 'Intel(R) ICH9M-E/M SATA AHCI Controller'

      If the controller above is present, the system is an 

      ICH9M-E/M system in AHCI mode. 

      Continue with Part 2B below.

   

    - 'Intel(R) ICH10D/DO SATA AHCI Controller'

      If the controller above is present, the system is an 

      ICH10D/DO system in AHCI mode. 

      Continue with Part 2B below.



    - 'Intel(R) 5 Series 4 Port SATA AHCI Controller'

      If the controller above is present, the system is a 

      5 Series 4 Port system in AHCI mode. 

      Continue with Part 2B below.



    - 'Intel(R) 5 Series 6 Port SATA AHCI Controller'

      If the controller above is present, the system is a 

      5 Series 6 Port system in AHCI mode. 

      Continue with Part 2B below.



    - 'Intel(R) 5 Series/3400 Series SATA AHCI Controller'

      If the controller above is present, the system is a 

      5 Series/3400 Series system in AHCI mode. 

      Continue with Part 2B below.

      

    - 'Intel(R) Desktop/Workstation/Server Express Chipset SATA AHCI Controller'

      If the controller above is present, the system is a 

      Desktop/Workstation/Server Express Chipset system in AHCI mode. 

      Continue with Part 2B below.

      

    - 'Intel(R) Mobile Express Chipset SATA AHCI Controller'

      If the controller above is present, the system is a 

      Mobile Express Chipset system in AHCI mode. 

      Continue with Part 2B below.



    - If none of the controllers above are shown, then 

      the system is not in AHCI mode. No other modes are 

      supported by the Intel Rapid Storage Technology 

      software. Continue with step 7 below.



7.  The system does not appear to be running in RAID or 

    AHCI mode. If you feel that the system is running in 

    RAID or AHCI mode and you do not see any of the 

    controllers listed above, contact the system manufacturer 

    or the place of purchase for assistance. You cannot 

    continue with Part 2 below until the system mode is 

    determined.







************************************************************

* Part 2A: System in RAID Mode

************************************************************



The procedure in this section can only be performed on a 

system that is in RAID mode. Do not continue with this 

procedure unless you have completed the steps in Part 1

above to determine this is true for this system. Before 

continuing, be sure to read the warnings below.



WARNINGS:

a. If a RAID 0 volume is deleted, all data on that volume 

   will be permanently deleted. Back up all critical data 

   before continuing. 



b. If system files are located on a disk or volume connected 

   to the RAID controller, these files will be deleted and the 

   operating system will have to be reinstalled.





1.  Ensure you have read and understand the warnings listed

    above.



2.  Reboot the system.



3.  Note whether you see a splash screen titled 'Intel(R)

    Rapid Storage Technology - Option ROM' during 

    the system startup. If so, continue with step 4 below. 

    If not, skip step 4 and continue with step 5 below.     



4.  Complete this procedure if the option ROM is installed:



    4a. Enter the option ROM Configuration Utility by pressing 

	Ctrl-I when prompted during the system startup.

    4b. In the setup program, select menu option 2 to enter 

	'Delete RAID Volume' menu.

    4c. Select the volume you want to delete using up or down 

        arrow keys.

    4d. Press 'Del' key to delete the selected volume, and 

        press 'Y' to confirm deletion. Repeat this step as 

        necessary to delete all volumes that are present. 

    4e. Exit the setup program.

    4f. Enter the system BIOS Setup (usually done by either 

        pressing a key 'F2' or 'Delete' as soon as the system 

	begins to boot).

    4g. Change the IDE configuration for the Serial ATA

        Controller from 'RAID' to 'IDE'.

    4h. Save changes and exit the system BIOS setup.



5.  Complete this procedure if the option ROM is not installed:



    5a. Enter the system BIOS Setup (usually done by either

        pressing a key such as 'F2' or 'Delete' as soon 

        as the system begins to boot).

    5b. Change the IDE configuration for the Serial ATA

        Controller from 'RAID' to 'IDE'.

    5c. Save changes and exit the system BIOS setup.



6.  Reboot the system.







************************************************************

* Part 2B: System in AHCI Mode

************************************************************



The procedure in this section can only be performed on a 

system that is in AHCI mode. Do not continue with this 

procedure unless you have completed the steps in Part 1

above to determine this is true for this system. It is

recommended that you back up all important data 

before continuing. 



1.  Reboot the system.



2.  Enter the system BIOS Setup (usually done by either

    pressing a key such as 'F2' or 'Delete' as soon as 

    the system begins to boot). 



3.  Change the IDE configuration for the Serial ATA

    controller from 'AHCI' to 'IDE'.



4.  Save changes and exit the system BIOS setup.



5.  Reboot the system. The operating system should 

    start as before.





Note: If you experience any difficulties making these 

changes to the system BIOS, please contact the motherboard 

manufacturer or the place of purchase for assistance.





************************************************************

* DISCLAIMER

************************************************************



INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS.

NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY

INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS

PROVIDED IN INTEL'S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL

ASSUMES NO LIABILITY WHATSOEVER AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED

WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY

OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE,

MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER

INTELLECTUAL PROPERTY RIGHT.



UNLESS OTHERWISE AGREED IN WRITING BY INTEL, THE INTEL PRODUCTS ARE NOT 

DESIGNED NOR INTENDED FOR ANY APPLICATION IN WHICH THE FAILURE OF THE INTEL

PRODUCT COULD CREATE A SITUATION WHERE PERSONAL INJURY OR DEATH MAY OCCUR.



Intel may make changes to specifications and product descriptions at any

time, without notice. Designers must not rely on the absence or 

characteristics of any features or instructions marked "reserved" or "undefined". 

Intel reserves these for future definition and shall have no

responsibility whatsoever for conflicts or incompatibilities arising from 

future changes to them. The information here is subject to change without 

notice. Do not finalize a design with this information.



The products described in this document may contain design defects or

errors known as errata which may cause the product to deviate from 

published specifications. Current characterized errata are available on 

request.



Contact your local Intel sales office or your distributor to obtain the 

latest specifications and before placing your product order.



Copies of documents which have an order number and are referenced in this

document, or other Intel literature, may be obtained by calling 

1-800-548-4725, or go to: http://www.intel.com/#/en_us_01 



Intel(R) is a trademark of Intel Corporation in the U.S. and other countries.



* Other names and brands may be claimed as the property of others





Copyright (c) 2001 2011, Intel Corporation. All rights reserved.



Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 1.09