English.ini Driver File Contents (AISuiteII_V20001_P8H61-M_PLUS_V3_XPVistaWin7_8.zip)

[translations]

OcWarn = "The default O.C Setting is higher than the Turbo Key current profile. Please set your favorite profile to use the Turbo Key function."

Warning = "Warning"

ProfileOn = "Turbo Key On"

ProfileOff = "Turbo Key Off"

ManualModeHint = "Easy, Real-Time O.C. tuning tool for extreme O.C. performance."

EasyModeHint = "Easy mode provides auto voltage settings based on your frequency preference for your system."

AutoTuningModeHint = "Auto Tuning enables you to automatically overclock to an extreme yet stable state."

TurboKeyModeHint = "Use Turbo Key to boost performance without interrupting ongoing work or games."

CpuLevelUpModeHint = "Cpu Level Up."

ApplyWarn = "The setting may cause your system unstable. Do you want to continue?"

SaveProfileWarn = "The setting must be applied before saving it."

RAIDModeDetect = "RAID mode is detected. The system reboots for several times during the auto tuning process, which may lead to some missing data in the RAID disk. Please set up RAID after Auto Tuning is done."

LoadAutoTuningSettingWarn = "Are you sure you want to load this setting ?"

RebootWarn = "It needs to reboot the system to make your change to take effect. Are you sure you want to reboot?"

ApplyCpuLevelWarn = "It needs to reboot the system to make your change to take effect. Are you sure you want to reboot? The setting may cause your system unstable. Do you want to continue?"

Refresh = "Refresh"

RefreshHint = "Click to refresh the current status."

Undo = "Undo"

UndoHint = "Undoes the current changes"

Apply  = "Apply"

ApplyHint = "Apply the current changes"

OsDefaultSetting = "OS Default Settings"

OsDefaultSettingHint = "Return to the system startup settings."

SaveProfile = "Save Profile"

SaveProfileHint = "Click to save the current O.C. settings to a profile."

MoreSetting = "More Settings"

AdvancedMode = "Advanced Mode"

GPUBoost = "GPU Boost"

CPURatio = "CPU Ratio"

Profile = "Profile"

HotKey = "HotKey"

ShowOSD = "Show OSD(On Screen Display)"

Load = "Load"

LoadHint = "Click to load and apply the Auto Tuning settings."

Start = "Start"

StartHint = "Start Auto Tuning."

FastTuning = "Fast Tuning"

ExtremeTuning = "Extreme Tuning"

CustomTuning = "Custom Tuning"

FlexibleVoltage = "Flexible Voltage"

FixedVoltage = "Fixed Voltage"

AutoTuningMode = "Auto Tuning Mode"

Mode1_Descript = "Fast CPU overclocking."

Mode2_Descript = "Extreme overclocking for CPU and memory."

Mode3_Descript = "Overclocking based on system configuration and settings."

VoltageSetting = "Voltage Setting"

VoltSettingInfo = "Auto Tuning provides you with these voltage settings for your O.C. voltage requirements: Flexible Voltage enhances the O.C. capability; and Fixed Voltage lowers power consumption."

DRAMFrequency = "DRAM Frequency"

DRAMFreqSettinInfo = "Select the DRAM frequency"

Name = "Name"

DeleteProfileWarn = "Are you sure you want to delete this profile?"

ReplaceProfileWarn = "The profile already exists. Are you sure you want to replace the profile?"

SaveProfileError = "The file name may not contain the following characters:  \ / : * ? < > |"

Yes = "Yes"

No  = "No"

OK = "OK"

Cancel = "Cancel"

Save = "Save"

Delete = "Delete"

AutoTuningWarn1 = "1. After pressing Start, the system starts performance tuning and may reboot 2 to 3 times. An error message indicating incorrect system shut down may appear after system reboot. Please ignore the message and continue the tuning process. In addition, please do not operate or manually restart the computer during the tuning process."

AutoTuningWarn2 = "2. The auto-tuned system performance varies with the installed devices such as CPU and DRAM."

AutoTuningWarn3 = "3. The auto-tuning function overclocks your system settings, including the frequency and voltage of CPU and DRAM. Installation of advanced cooling systems is recommended."

AutoTuningWarn4 = "4. The auto tuning settings will be stored in the system BIOS and will take effect after the system automatically reboots."

AutoTuningWarn5 = "5. Auto-tuning is under stress test. Your screen might flash during the test and will return to normal after the test completes."

LightTitle = "Auto System Level Up"

Note1 = "Just click the button to automate overclocking and achieve a total system level up."

Note2 = "2nd CPU enables auto overclocking to an extreme yet stable state"

Loading = "Loading"

ProfileLenghtlimit = "( The filename cannot exceed 16 characters. )"
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web3, load: 2.33