;
; JMicron JMB38X Driver Setup Ini File
;
[Startup]
; Product Specific Setup Package GUID
ProductGUID={26604C7E-A313-4D12-867F-7C6E7820BE4C}
[Install_Setting]
;Customize INF file name
InfName=jmcr_jm.inf
; If SupportDriverPreInstall = 1, indicate that setup package "support driver preinstall". Otherwise, indicate NOT support.
; Notice: If Device has in-box driver, PreInstall would not work as expected with non-WHQL driver.
SupportDriverPreInstall=0
; If RebootNotRequiredAfterSetupDriver = 1, indicate that "Reboot is NOT required after driver setup". Otherwise, reboot is required.
RebootNotRequiredAfterSetupDriver=1
; If RescanAfterUninstall=1, setup program will Notify OS to Rescan Device after uninstall succeed.
RescanAfterUninstall=1
; If RemoveAllDriverFromDriverStore =1, setup program would Remove all installed inf of the same inf name during uninstall
RemoveAllDriverFromDriverStore=1
; If RemoveInstalledPackageFirst=1, setup program would request to remove installed version before installation.
; Otherwise, setup program would overwrite registry and files of installed version.
RemoveInstalledPackageFirst=0
; if WaitDiskDriverInstall=1, indicate that the driver and setup program will wait until Disk driver is installed ready
WaitDiskDriverInstall=0
; CustomizedSettingCount indicate "the total number of CustomizedSetting".
CustomizedSettingCount=21
; [CustomizedSettings Definition]
; CustomizedSetting1: Customized Setting Flag. Bit Defintion would be appened later
; CustomizedSetting2: LED Pulse Width. DWord value.
; CustomizedSetting3: SD/MMC Slot A Pull-High/Pull-Low Setting
; CustomizedSetting4: SD/MMC Slot B Pull-High/Pull-Low Setting
; CustomizedSetting5: MS Slot A Pull-High/Pull-Low Setting
; CustomizedSetting6: MS Slot B Pull-High/Pull-Low Setting
; CustomizedSetting7: XD Pull-High/Pull-Low Setting
; CustomizedSetting8: SD/MMC Timing Delay Setting
; CustomizedSetting9: MS Timing Delay Setting
; CustomizedSetting10: IC Driving Setting
; CustomizedSetting11: D3E Waiting Minutes (Max 65535)
; CustomizedSetting12: Wait Disk Driver Ready Time
; CustomizedSetting13: SD/MMC Timing Delay Setting for 388/389
; CustomizedSetting14: MS Timing Delay Setting for 388/389
; CustomizedSetting15: Default IC Driving Setting for SD/MMC/MS of 388/389
; CustomizedSetting16: IC Driving Setting for MSProHG 8-bit Mode on 388/389
; CustomizedSetting17: Default IC Driving Setting for xD of 388/389
; CustomizedSetting20: Default IC Driving Setting for xD of 385/380
; CustomizedSetting21: Customized Setting Flag 2
; [CustomizedSetting1 Bit Definition]
; Bit[ 1] (0x00000002): Set JMicron Disk Drive Icons
; Bit[ 4] (0x00000010): Enhance xD Write Performance
; Bit[ 5] (0x00000020): Support D3E // Need BIOS Supporting
; Bit[11] (0x00000800): Report All Disk to install disk driver when install JM 38X driver
; Bit[14] (0x00004000): Do not modify the Controller Capabilities Reported by BIOS
; Bit[31] (0x80000000): Set LED always on when Card Plugged
CustomizedSetting1=0x02101032
CustomizedSetting2=0x4000
CustomizedSetting3=0x50800F1F
CustomizedSetting4=0x00000F1F
CustomizedSetting5=0x5f8f0000
CustomizedSetting6=0x0f0f0000
CustomizedSetting7=0x4F8F1030
CustomizedSetting8=0x000337a3
CustomizedSetting9=0x00004000
CustomizedSetting10=0x01020101
CustomizedSetting11=0x00000005
CustomizedSetting12=0x0000000F
CustomizedSetting13=0x03333aa3
CustomizedSetting14=0x00BA4000
CustomizedSetting15=0x03043333
CustomizedSetting16=0x03073333
CustomizedSetting17=0x04053333
CustomizedSetting18=0x00000014
CustomizedSetting19=0x00000100
CustomizedSetting20=0x01020101
CustomizedSetting21=0x00002001
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.