SUNIX Inc. Multi-I/O Controller Windows(R) Driver.
******************************************************************************
This driver is built for the Microsoft(R) Windows Operating Systems.
Copyright 2012 SUNIX, Inc. All names mentioned herein are a registered trademark
or a trademark of SUNIX or its respective owners. All rights reserved.
******************************************************************************
Driver Version : 8.0.0.0
Release Data : 2012/08/11
******************************************************************************
Support platform:
Microsoft Windows 8 32bit/64bit
Microsoft Windows 7 32bit/64bit
Microsoft Windows Vista 32bit/64bit
Microsoft Windows XP 32bit/64bit
Microsoft Windows 2000 SP4
Microsoft Windows Server 2012 64bit
Microsoft Windows Server 2008 R2 64bit
Microsoft Windows Server 2008 32bit/64bit
Microsoft Windows Server 2003 32bit/64bit
Microsoft Windows Embedded POSReady 2009
Microsoft Windows Embedded Standard
******************************************************************************
INSTALLATION AND REMOVAL INSTRUCTIONS:
------------------------------------------------------------------------------
Setup driver at first time
------------------------------------------------------------------------------
Step 1. Before installing the SUNIX Multi-I/O Controller Driver, press the
[Cancel] button if Windows detect the new device.
Step 2. Insert "SUNIX Driver" CD into the CD-ROM drive and run Setup.exe.
Step 3. Click [Next/OK] to continue the procedure.
Step 4. Press [Finish] and reboot your system to complete the installation.
------------------------------------------------------------------------------
Update driver
------------------------------------------------------------------------------
Step 1. Follow Step 2-4 described in [Setup driver at first time] above to
complete the procedure.
------------------------------------------------------------------------------
Remove driver
------------------------------------------------------------------------------
Step 1. Go to "Start\Settings\Control Panel" and select [Add/Remove Programs]
(or [Programs and Features]) icon.
Step 2. Select "SUNIX Multi-IO Controller" and press [Remove] button.
Step 4. Click on [Next/OK] to continue the procedure.
Step 4. Press [Finish] complete the uninstallation.
Step 5. Shutdown the system and remove hardware device to fully remove driver.
------------------------------------------------------------------------------
Silent installation
------------------------------------------------------------------------------
Run "Setup.exe /s /f2<path\logfile name>"
i.e. Setup.exe /s /f2c:\logfiledir\logfile.log
------------------------------------------------------------------------------
Silent uninstallation
------------------------------------------------------------------------------
Run "Setup.exe /uninst /f2<path\logfile name>"
i.e. Setup.exe /uninst /f2c:\logfiledir\logfile.log
******************************************************************************
DRIVER FILES:
Setup.exe: SUNIX Multi-I/O Controller driver package file
readme.txt: readme text file
******************************************************************************
RELEASE NOTE:
Ver 8.0.0.0 - 2012/08/11
0) release version
1) support SUNIX SUN2000 products
2) support more languages
3) add PLL function
4) add parallel port default mode selection function
5) add enable legacy pnp detection setting in advanced control page
6) fix the printer icon lost issue in Windows 7
7) fix the driver crash issue when update driver
8) fix an issue sometimes COM port cannot access after driver installation
Ver 7.2.0.0 - 2010/12/07
0) release version
1) support internal/external GPIO
2) support 3-in-1 (RS-232/422/485) series
3) support more than three parallel ports
4) support SUNIX cash drawer kicker interface card
5) support SUNIX serial library
6) support multi-language UI
7) support silent installation
8) modify layout of control page
9) use driver dll to replace system default dll
10) fix an issue about H/W flow control setting in RS-422/485
11) fix an issue about the delay time of closing port
12) fix an issue about driver crash during change power state
13) fix an issue about buffer overflow
Ver 7.1.0.0 - 2010/01/13
0) release version
1) solve an issue about re-map series
2) support SUN1999 cardbus series
3) modify layout of control page
4) add reference clock setting in control page
5) add specific IoControl command to return part number
Ver 7.0.0.0 - 2009/07/14
0) release version
1) support Golden series, Matrix series, and SUN1999 series
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.