; Copyright (c) 2009-2012 Intel Corporation ; ********************************************************************************************** ; ********************************************************************************************** ; ** Filename: iaStorAC.inf ; ** Revision: 07/31/2012,11.5.2.1001 ; ** Abstract: Windows* INF File for AHCI Intel(R) Rapid Storage Technology Driver ; ** Installs: RST AHCI RAID Controller Miniport + RST Filter Driver ; ********************************************************************************************** [Version] Signature="$Windows NT$" Provider=%INTEL% ClassGUID={4D36E97B-E325-11CE-BFC1-08002BE10318} Class=SCSIAdapter CatalogFile=iaStorAC.cat DriverVer=07/31/2012,11.5.2.1001 ; [PackageInfo] Name=AHCI ; [SourceDisksNames] 1 = %DiskId1%,,,"" [DestinationDirs] DefaultDestDir = 12 ; [ControlFlags] ExcludeFromSelect = * ; [Manufacturer] %INTEL% = INTEL, NTx86.5.2, NTamd64.5.2, NTx86.6.2, NTamd64.6.2 [iaStorA_Service_Inst] ServiceType = %SERVICE_KERNEL_DRIVER% StartType = %SERVICE_BOOT_START% ErrorControl = %SERVICE_ERROR_NORMAL% ServiceBinary = %12%\iaStorA.sys LoadOrderGroup = SCSI miniport AddReg = pnpsafe_pci_addreg ; [iaStorA_EventLog_Inst] AddReg = iaStorA_EventLog_AddReg ; [iaStorA_EventLog_AddReg] HKR,,EventMessageFile,%REG_EXPAND_SZ%,"%%SystemRoot%%\System32\IoLogMsg.dll;%%SystemRoot%%\System32\drivers\iaStorA.sys" HKR,,TypesSupported,%REG_TYPE_DWORD%,7 ; [iaStorF_Service_Inst] ServiceType = %SERVICE_KERNEL_DRIVER% StartType = %SERVICE_BOOT_START% ErrorControl = %SERVICE_ERROR_NORMAL% ServiceBinary = %12%\iaStorF.sys ; [iaStorF_EventLog_Inst] AddReg = iaStorF_EventLog_AddReg ; [iaStorF_EventLog_AddReg] HKR,,EventMessageFile,%REG_EXPAND_SZ%,"%%SystemRoot%%\System32\IoLogMsg.dll" HKR,,TypesSupported,%REG_TYPE_DWORD%,7 ;****************************************************************************** ;* ;* 32-BIT X86 ARCHITECTURE ;* ;* This section specifies the 32-bit architecture specific INF file entries ;* required to install a driver as a 32-bit compatible driver. ;* ;****************************************************************************** [SourceDisksFiles.x86] iaStorA.sys = 1,,, iaStorF.sys = 1,,, ; [INTEL.NTx86.5.2] ;client %PCI\VEN_8086&DEV_2822&CC_0104.DeviceDesc% = iaStorA_inst, PCI\VEN_8086&DEV_2822&CC_0104 %PCI\VEN_8086&DEV_282A&CC_0104.DeviceDesc% = iaStorA_inst, PCI\VEN_8086&DEV_282A&CC_0104 ; [INTEL.NTx86.6.2] ;client %PCI\VEN_8086&DEV_2822&CC_0104.DeviceDesc% = iaStorA_inst_8, PCI\VEN_8086&DEV_2822&CC_0104 %PCI\VEN_8086&DEV_282A&CC_0104.DeviceDesc% = iaStorA_inst_8, PCI\VEN_8086&DEV_282A&CC_0104 ; [iaStorA_inst.ntx86] CopyFiles=@iaStorA.sys CopyFiles=@iaStorF.sys ; [iaStorA_inst_8.ntx86] CopyFiles=@iaStorA.sys ; [iaStorA_inst.ntx86.HW] AddReg = iaStorF_addreg AddReg = msi_addreg AddReg = storport_addreg ; [iaStorA_inst_8.ntx86.HW] AddReg = msi_addreg AddReg = storport_addreg ; [iaStorA_inst.ntx86.Services] AddService = iaStorA, %SPSVCINST_ASSOCSERVICE%, iaStorA_Service_Inst, iaStorA_EventLog_Inst AddService = iaStorF, , iaStorF_Service_Inst, iaStorF_EventLog_Inst ; [iaStorA_inst_8.ntx86.Services] AddService = iaStorA, %SPSVCINST_ASSOCSERVICE%, iaStorA_Service_Inst, iaStorA_EventLog_Inst ; ;******************************************************** ;* ;* 64-BIT X86 ARCHITECTURE ;* ;* This section specifies the 64-bit architecture specific INF file entries ;* required to install a driver as a 64-bit compatible driver. ;* ;****************************************************************************** [SourceDisksFiles.amd64] iaStorA.sys = 1,,, iaStorF.sys = 1,,, ; [INTEL.NTamd64.5.2] ;client %PCI\VEN_8086&DEV_2822&CC_0104.DeviceDesc% = iaStorA_inst, PCI\VEN_8086&DEV_2822&CC_0104 %PCI\VEN_8086&DEV_282A&CC_0104.DeviceDesc% = iaStorA_inst, PCI\VEN_8086&DEV_282A&CC_0104 ; [INTEL.NTamd64.6.2] ;client %PCI\VEN_8086&DEV_2822&CC_0104.DeviceDesc% = iaStorA_inst_8, PCI\VEN_8086&DEV_2822&CC_0104 %PCI\VEN_8086&DEV_282A&CC_0104.DeviceDesc% = iaStorA_inst_8, PCI\VEN_8086&DEV_282A&CC_0104 ; [iaStorA_inst.NTamd64] CopyFiles=@iaStorA.sys CopyFiles=@iaStorF.sys ; [iaStorA_inst_8.NTamd64] CopyFiles=@iaStorA.sys ; [iaStorA_inst.NTamd64.HW] AddReg = iaStorF_addreg AddReg = msi_addreg AddReg = storport_addreg ; [iaStorA_inst_8.NTamd64.HW] AddReg = msi_addreg AddReg = storport_addreg ; [iaStorA_inst.ntamd64.Services] AddService = iaStorA, %SPSVCINST_ASSOCSERVICE%, iaStorA_Service_Inst, iaStorA_EventLog_Inst AddService = iaStorF, , iaStorF_Service_Inst, iaStorF_EventLog_Inst ; [iaStorA_inst_8.ntamd64.Services] AddService = iaStorA, %SPSVCINST_ASSOCSERVICE%, iaStorA_Service_Inst, iaStorA_EventLog_Inst ; [iaStorF_addreg] ; Layer the RST Filter driver under all Disk class devices as a lower disk class filter ; HKLM, System\CurrentControlSet\Control\Class\{4d36e967-e325-11ce-bfc1-08002be10318}, LowerFilters, 0x00010008, iaStorF HKLM, System\CurrentControlSet\Control\Class\{4d36e965-e325-11ce-bfc1-08002be10318}, LowerFilters, 0x00010008, iaStorF ; [pnpsafe_pci_addreg] ; Use raw values for BusType, not a DEFINE, ChkInf fails on hex alpha chars ; BusType_ATA == 0x3, BusTypeATA, BusType_RAID == 0x8, BusType_SATA == 0xb HKR, Parameters\PnpInterface, 5, %REG_TYPE_DWORD%, 0x00000001 HKR, Parameters, BusType, %REG_TYPE_DWORD%, 0x00000008 ; Tell Storport in Win7/Srv08R2(KB982018) that driver can report 4K sector size (not needed in Win8) HKR, Parameters\Device, EnableQueryAccessAlignment, %REG_TYPE_DWORD%, 0x00000001 ; [Strings] ; Localizable Strings ; diskId1 = "RST Installation Disk" ;client PCI\VEN_8086&DEV_2822&CC_0104.DeviceDesc = "Intel(R) Desktop/Workstation/Server Express Chipset SATA RAID Controller" PCI\VEN_8086&DEV_282A&CC_0104.DeviceDesc = "Intel(R) Mobile Express Chipset SATA RAID Controller" ; INTEL = "Intel Corporation" ; ; Non-Localizable Strings ; SPSVCINST_ASSOCSERVICE = 0x00000002 REG_MULTI_SZ = 0x00010000 REG_EXPAND_SZ = 0x00020000 REG_TYPE_DWORD = 0x00010001 SERVICE_KERNEL_DRIVER = 1 SERVICE_BOOT_START = 0 SERVICE_ERROR_NORMAL = 1 ; ; MSI enables. ; [msi_addreg] HKR, Interrupt Management, 0x00000010 HKR, Interrupt Management\MessageSignaledInterruptProperties, 0x00000010 HKR, Interrupt Management\MessageSignaledInterruptProperties, MSISupported, %REG_TYPE_DWORD%, 1 HKR, Interrupt Management\MessageSignaledInterruptProperties, MessageNumberLimit, %REG_TYPE_DWORD%, 1 ; [storport_addreg] ;;; Enables/Disables Idle Power Management for StorPort HKR, StorPort, EnableIdlePowerManagement, %REG_TYPE_DWORD%, 0x00000001 ;;; Force StorPort to keep all sense data in Pre-Win8 OSes (max value is 255) HKR, StorPort, TotalSenseDataBytes, %REG_TYPE_DWORD%, 0x000000FFDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.