Release_87B.txt Driver File Contents (TC40186700A.exe)

Date		Version	Note
===============+========+=============================================================================================
2006.07.18	1.018	1. Update OFDM parameter.
			2. Update dynamic initial gain setting.
			3. Update Rx descriptor definition.
			4. Fix QoS info field of Tx packets in Ad-Hoc mode.
			5. Use 24e to protect CAM configuration.
			6. Fix a bug about contention window setting.
			7. It's the first released beta version.

2006.07.21	1.019	1. "Init from HwParaFile": support partial modify option.

2006.07.26	1.021	1. Fix the bug about Rx stopping for defragmentation.
			2. Fix roaming bug.
			3. Review for CCX test plan v3.61, setion 4.7.4.1.

2006.07.26	1.022	1. Solve the "Out of RFD" issue.
			2. Fix a bug which cause always roaming without indicate DISCONNECT 
			event up when AP is gone.
			3. Change upper limit of off-serving channel measurement.
			4. Fix a IO bug in setting HW_VAR_CCX_CHNL_LOAD.
			5. Don't switch channel for Beacon Table request.
			6. Add 8187B demo board MAC and AFE power saving parameters.
			
2006.08.10	1.023	1. Support WMM Power Save.

2006.08.11	1.024	1. Regular reision about HW parameters.

2006.08.11	1.025	1. Fix Win98SE driver initialzation issue.
			2. Regular reision about HW parameters.

2006.08.21	1.026	1. Revise CCX Radio Measurement.
			2. CKIP implemented.
			3. Revise HW parameters for AFE power-saving and USB IF.

2006.08.23	1.027	1. Turn off AFE power-saving.
			2. Revise CCX Radio Measurement.

2006.08.27	1.028	1. Revised for CCX Radio Measurement pre-test.

2006.09.04	1.029	1. Add PSP XLink support.

2006.09.05	1.031	1. Initialize Tx power index according to EEPROM.

2006.09.19	1.032	1. Implement CCX functions: Rouge AP, CCKM, Network EAP authentication.
			2. Support CKIP under WMM.

2006.09.26	1.033	1. Regular revision on HW parameter.	
			2. Revise Aironet IE.

2006.09.28	1.034	1. Revise Tx AGC parameters.
			2. Implement CCX S31 TPC.

2006.10.11	1.035	1. Add 87B OEM ID.
			2. Fix tx out of order problem.
			3. Implement 87B high power mechanism.
			4. Revise bulk in/out behavior for XP SP1.

2006.10.30	1.036	1. Support Vista.

2006.11.03	1.037	1. Add Netgear VID/PID on Vista.

2006.11.07	1.038	1. Fix incorrect channel and frequency on Vista.
			2. Fix OID_DOT11_RTS_THRESHOLD, OID_DOT11_RTS_THRESHOLD.
			3. Add Vista X64.

2006.12.01	1.039	1. Revise power save state issue
			2. Fix TX nested lock issuew hen unplug the device surprisely.
			3. Fix driver loading issue.
			4. Fix connecting to hidden AP issue 
			5. Fix plug/unplug caused scan fail.
			6. Add RTS, Frag threshold, channel plan, wireless mode, preamble to property setting. 

2006.12.07	1.041	1. Fix IBSS mode association behavior.
			2. Fix Encryption key index issue.
			3. Fix an mistake in disasso indication.

2006.12.13	1.042	1. Revise protection mode HW parameter.

2006.12.16	1.043	1. Review signal strength.
			2. Implement turbo mode.
			3. Fix Vista driver hibernate bug.
			4. Fix B mode IBSS bug.
			5. Implement S/W RF switch.
			6. Revise H/W parameters for Tx throughput, CCK sensitivity, and protection mode.

2006.12.20	1.044	1. Fix HW radio off mechanism.

2006.12.22	1.045	1. [Vista] Fix IBSS with RSNA issue.
			2. [Vista] Fix start IBSS issue, can't joined and leave more than two times.
			3. [Vista] Fix rate adaptive bug.
			4. [Vista] Fix several hidden AP issue.

2006.12.26	1.046	1. Fix H/W parameters for protection mode.

2007.01.04	1.047	1. Fix UI RF off issue.

2007.01.04	1.048	1. Fix link failed bug when we resume from hibernate state.

2007.01.07	1.049	1. Implement Antenna Diversity.
			2. [Vista] Regular revision for DTM.

2007.01.11	1.051	1. Enhance rate adaptive.
			2. Fix AP mode WPA-PSK group key issue.
			3. Review 802.11 power-save mode.
			4. [Vista] Review Rx signal strength.
			5. [Vista] Review wake up link behavior.

2007.01.12	1.052	1. [Vista] Add Qos support.

2007.01.12	1.053	1. [Vista] Regular revision for DTM.

2007.01.16	1.054	1. Update channel plan.
			2. Add OID support for WMM and PSP.

2007.01.17	1.055	1. Review IBSS beacon.

2007.01.19	1.056	1. [Vista] Fix "restart" with wrong VID/PID issue.
			2. Support WPA-PSK AES and WPA2-PSK AES/TKIP in AP mode.

2007.01.24	1.057	1. Revise power-save parameters.
			2. Revise S3/S4 parameters.

2007.01.26	1.058	1. Fix NDIS5 Bulk IN/Bulk OUT issue.

2007.01.30	1.059	1. Revise RF OFF and SLEEP parameters.

2007.02.03	1.061	1. [Vista] Fix Vista X64 scan no BSS issue.
			2. [Vista] Review driver initialization and Halt process.

2007.02.06	1.062	1. [Vista] Fix S3/S4 Tx complete bug.
			2. Adjust H/W parameter for MP process.

2007.02.08	1.063	1. [Vista] Fix DTM common senario stress IO bug.
			2. Implement 802.11d.
			3. Review USB 1.1 connection behavior.

2007.02.14	1.064	1. One AP already return re-association response. modify 
			code for that AP.

2007.02.16	1.065	1. [Vista] Fix RF OFF BSOD bug.

2007.03.05	1.066	1. Implement 802.11d debug mechanism.
			2. Implement fragmentation threshold in advanced page.
			3. Fix Cisco AP CCK satuation issue.
			4. Revise H/W parameter at RF off case.
			5. Fix AP with 12-byte support rate IE issue.

2007.03.15	1.067   1. [Vista]Fix the issue we unplug 87B under sleep issue.

2007.03.15	1.068	1. Revise memory management at receiving packet.
			2. Review H/W parameter for Nosie Histogram measurement.
			3. Review 802.11d log event.

2007.03.15      1.069   1. Fix HW on/off minor issue.

2007.03.21      1.070   1. Fix RTS threshold 
                      	2. System hub test modification

2007.03.23      1.072   1. [Vista] Revise support rate set setting. 	
			2. Revise H/W parameter settings for turbo mode mechanism.
			3. Revise Telec channel plan for customized requirement.

2007.04.02	1. Antenna diversity default open

2007.04.04	1.073 	1. Make DHCP more strong
			2. Solve scan issue after restart/hibernate

2007.04.06	1.074	1. Fix 1071 version's bug on WinMe, only affect WinMe.

2007.04.16	1.075	1. Customize the Scan process of Toshiba(Channel 12~ Channel 14:
			   Passive Scan).

2007.04.16	1.076	1. Fix passive scan bug.
			
2007.04.17	1. Prevent SoftAP beacon from stop on specific platform.

2007.04.17	1.077	1. [WinMe] Revise the bug of scan process.
			2. Revise site survey unstable problem.

2007.04.19	1.078	1. Add Wi-Fi Protected Setup in Vista.
			2. Add Netgear Tx Power.

2007.04.20	1.079	1. Revise Netgear Tx Power.

2007.04.23	1.080	1. Fix OFDM config.

2007.04.30	1.081	1. Revise S3 resume.

2007.05.04	1.082	1. For Vista x86/x64 logo & XP WHQL driver.

2007.05.07	1.083	1. Fix Software AP mode out of buffer issue.

2007.05.07	1.084	1. Customized RF On/Off behavior in S3/S4 state

2007.05.18	1.085	1. [XP] Fix Realtek UI WEP error in WPS

2007.05.23	1.086	1. Add MacOSX 10.3/10.4 support.
					2. [MacOS] Fix unplug issue under intel platform.
			
2007.05.24	1.087	1. Fix connection icon behavior	

2007.05.29	1.088	1. [MacOS] Fix MacOS driver initialzation issue.

2007.06.01	1.089	1. Fix UMPC higher CPU utilization issue.
			2. For Vista x86/x64 logo & XP WHQL driver. 

2007.06.08	1.090	1. Fix blocking power IRP issue.					

2007.06.13	1.091	1. Enhance the performance in Ad-hoc mode

2007.06.26	1.092	1. Fix the link status when testing Antenna switch.

2007.06.28	1.093	1. Modify the site survey process.

2007.06.28	1.094	1. Fix the radio on/off after s4 resume issue		

2007.07.05	1.095	1. For WHQL Logo

2007.07.17	1.097	1. [Vista] Revise usb control transfer.

2007.08.06	1.098	1. [Vista] Modify roaming function.

2007.08.10	1.099	1. Revise Soft AP mode throughput.

2007.08.31	1.101	1. Revise extended roaming mechanism for customization.
			2. Improve B mode throughput.

2007.09.04	1.102	1. Windows Vista Logo

2007.09.10	1.103	1. [Vista] Modify Roaming function.

2007.09.20	1.105	1. Enable Inactive Power Save

2007.10.04	1.106	1. Add some GPIO function

2007.10.18	1.107	1. Modify Led Blink Strategy

2007.11.08	1.108	1. [Vista] Fix the bug of reconnection from S3/S4 resume.

2007.11.21	1.110	1. [Vista] Add oid and Recieve function For WPS.

2007.11.28	1.111	1. [XP] Add oid and Recieve function For WPS.

2007.11.29	1.112	1. [ALL] Fix QoS Header effect WPS.

2007.12.04	1.113	1. Revise reconnection failure while resume.

2007.12.11	1.114	1. Windows Vista/XP Logo.

2007.12.14	1.115	1. WPS Netgar and Power save enhance.

2007.12.26	1.116	1. Power Save Link capability enhance.

2008.01.16	1.117	1. Fix abnormal power consumption issue.

2008.02.20	1.118	1. Fix blocking power IRP issue when entering S3/S4.

2008.03.11	1.119	1. Fix sleep on scan issue.

2008.03.13	1.120	1. Fix NBLs completions issues while system resume.

2008.03.18	1.121	1. Revise Inactive Power Save mechanism.

2008.03.18	1.122	1. Revise RF settings and PnP related functionalities.

2008.03.24	1.123	1. Revise LED related functionalities.

2008.03.26	1.124	1. Revise WEP104 related functionalities. 

2008.04.08	1.125	1. Fix large file transfer fail.

2008.04.10	1.126	1. Fix WPS Feature Pack issue under Vista SP1

2008.04.14	1.127	1. Add mesh functionality.

2008.04.15	1.128	1. Revise LED for customization.

2008.04.18	1.129	1. Revise querying mesh ID.

2008.04.21	1.130	1. Revise LED for customization.

2008.04.24	1.131	1. Revise connect request for WPS Feature Pack
			2. Revise LED for customization.

2008.05.06	1.132	1. Revise WOWLAN feature.
			2. Revise IPS feature.

2008.05.28	1.133	1. For WHQL Logo

2008.05.29	1.134	1. Revise Scan after the system is resuming.

2008.06.25	1.135	1. Fix DHCP issue

2008.07.23	1.137	1. Revise boot time
			2. [MacOS] Fix wpa issue that use wpa can associate with wpa2 AP.

2008.08.12	1.144	1. Enhanced boot time.
			2. Reduce the Halt time.

2008.08.15	1.145	1. Revise boot time
			2. Revice Adhoc IPv6 ping issue.

2008.08.21	1.146	1. Fix Vista Mobile Center icon disabled issue

2008.08.27	1.147	1. [XP] Fix WPA-TKIP Adhoc ping failed in new verision of Windows Zero Config.
			2. Using System PowerProfile to adjust the power consumption. 

2008.09.24	1.148	1. Fix power IRP issue when entering S3/S4.
			2. Fix XP SP3 cold boot issue
			3. [MacOS] Fix SSID with maximum length display abnormally. 
			4. [MacOS] Improve Tx Throughput. 

2008.10.24	1.149	1. Add Global Doamin and World Wide 13.

2008.11.12	1.150	1. Customize 802.11d request.

2008.11.25	1.151	1. Modify the IBSS Issue.
			2. Modify the S3/S4 Issue.
									
2008.12.24	1.152	1. Modify the Scan Issue.

2008.12.24	1.153	1. Modify GPIO function.

2009.01.08	1.157	1. Modify LED behavior.		

2009.01.13	1.158	1. Modify IBSS behavior.	
			2. Modify RF behavior.			

2009.03.23	1.159	1. Modify the WLK 1.3 function.

2009.04.15	1.160	1. Modify the USB get descriptor info.

2009.04.24	1.161	1. Modify the WLK 1.3 function.	

2009.05.25	1.170	1. Support Win 7

2009.06.17	1.171	1. Revise Win7 Disabling Unstable.		

2009.06.30	1.172	1. Revise Win7 Security problem.	

2009.06.25	1.173	1. Revise Ad hoc issue.	

2009.07.01	1.174	1. For WLK 1.4

2009.07.31	1.175	1. Modify Some Scan issue.

2009.08.12	1.176	1. Modify LED behavior

2009.09.02	1.177	1. Fixed System Logo issue

2009.09.14	1.178	1. Fixed System Logo issue

2009.09.16	1.178	1. Fixed Device logo issue

2009.09.25 	1.179	1. Fix phy's power state indication.	

2009.10.07	1.180	1. Fix WCN WPS GUI fail issue.

2009.11.05	1.181	1. Fix USB related issue.

2010.03.31	1.182	1. Modify HW initializing sequence.
			2. Pass WLK1.5	
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 0.61