Tally T9114 Laser Printer Series
LINUX Driver Installation Overview
Introduction
------------
This linux dirver installation script supports RedHat 6.0 or later.
Supported Model
---------------
Tally T9114 PCL5e Compatible
Installation Procedure for Redhat 6.x ~ 7.0
--------------------------------------------------
0. Transfer into super user mode.
1. Insert Tally T9114 Printer Driver CD-ROM to CD-ROM Driver.
2. Mount your CD-ROM Driver and run srcript file.
>mount -t iso9660 /dev/cdrom /mnt/cdrom
>cd /mnt/cdrom/en/linux/install/
>install.sh (or ./install.sh)
3. Setup your printer driver.
A. >printtool (Run printtool program)
B. Click Add button and select the proper printer type and click OK button
C. Set proper setting values in "Edit XXXXXXXX Entry" Window and Click Select button of Input Filter
(XXXXXXXX is the printer type you select)
D. Add the needed printer driver for the emulation that your printer supports.
(Select Tally T9114 PCL5e Compatible) and click OK button.
Installation Procedure for Redhat 7.1 Linux
--------------------------------------------------
0. Run printtool (actually, printconf utility will be executed)
1. Add New Printer
2. Select printer driver compatible with 'ljet4' driver as your printer model,
because ljet4 is the driver for PCL5e.
3. run printtool and restart lpd.
*. Redhat 7.1 changed 'printtool' to 'printconf', so install.sh in CD/linux/redhat
doesn't work any more. You can downgrade the printconf to the printtool of
Redhat 7.0, or manually configure your printer setting by above description.
For detail documentations, refer to the following web site.
"http://www.linuxprinting.org/"
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.