.TOPIC:
Contents
Accton Technology Corporation
EN1207-TX/B-TX/C-TX Series PCI Fast Ethernet Adapter
Netware MSL driver Installation Guide
A. Preparation
-----------
Before running Accton EN1207-TX Series MSL driver, you should prepare
i). a cross-over cable,
ii). two EN1207-TX Series adapters.
B. Configuration
-------------
+---------------------+ +---------------------+
| | | |
| Netware | | Netware |
| SFT III Server | | SFT III Server |
| Primary IOEngine | | Secondary IOEngine |
| | | |
| +------------| Cross-over +------------+ |
| | EN1207-TX | Cable | EN1207-TX | |
| | Series |<------------->| Series | |
| +------------| +------------+ |
| | | |
+---------------------+ +---------------------+
C. Activate MSL driver
-------------------
1. Copy AC4XMSL.MSL from EN1207-TX Series driver diskette to the SFT
III system directory (ex: C:\NWSERVER) in your Mirror Servers,
respectively.
2. From the Primary IOEngine Console, type the following command to load
EN1207-TX Series MSL driver,
LOAD AC4XMSL SLOT=16
The keyword SLOT identifies which EN1207-TX Series adapter is
used in the server. Slot value 16 represents the first EN1207-TX
Series adapter. While 17 represents the next one, etc.
3. From Secondary IOEngine Console, type the above command again to
load the MSL driver on the secondary SFT III Server. After that,
the IOEngine Console should prompt with a message that the
Mirror Server Link has been estabilished.
4. Now, you can start up the MSEngine by entering the command
"ACTIVATE SERVER" on the Primary IOEngine Console.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.