1. en1207c_drivers.zip Driver
2. NDIS.TXT File Contents

NDIS.TXT Driver File Contents (en1207c_drivers.zip)

                      Accton Technology Corporation
NDIS/2 Driver Installation for EN1203, EN1207(-TX/B-TX/C-TX) Series Ethernet Adapter
     ===================================================================

Copyright (c) 1995-1997 by Accton Technology Corporation.
All rights reserved.

The drivers you need are in the directories MSLANMAN.DOS, MSLANMAN.OS2 and
NDIS.  The NDIS drivers contained in these subdirectories are used with 3Com
3+Open, Microsoft OS/2 LAN Manager OEM distribution, Release 1.x or 2.x,
and other compatible OEM versions of LAN Manager.  The driver can also used
with IBM LAN Server 3.0, 4.0, Banyan VINES, ARTISOFT LANtastic 5.0, 6.0,
Wollongong Pathway Access, Microsoft Windows for Workgroups v3.11,
DEC PATHWORKS, Sun PC-NFS etc.


The drivers named ETHPCI conform to the Network Driver Interface Specification
(NDIS) defined by Microsoft/3Com.

Included in MSLANMAN.DOS, and NDIS subdirectories are the following files:

\MSLANMAN.DOS\DRIVERS\ACCTON\ETHPCI

    ETHPCI.DOS          The DOS NDIS MAC driver
    PROTOCOL.INI        A sample section of PROTOCOL.INI file

\MSLANMAN.DOS\DRIVERS\NIF\

    ETHPCI.NIF          Network Information File

\MSLANMAN.OS2\DRIVERS\ACCTON\ETHPCI

    ETHPCI.OS2          The OS2 NDIS MAC driver
    PROTOCOL.INI        A sample section of PROTOCOL.INI file

\MSLANMAN.OS2\DRIVERS\NIF\

    ETHPCI.NIF          Network Information File


\NDIS

    NDIS.TXT            This readme file

    WFW.TXT             The Installation guide for
                        Windows for Workgroups v3.11

    LANMAN.TXT          The Installation guide for
                        LAN Manager

    LANSVR.TXT          The Installation guide for Lan Server

    BANYAN.TXT          The Installation guide for Banyan VINES

    LANTASTI.TXT        The Installation guide for ARTISOFT LANtastic 5.0, 6.0

    PATHWORK.TXT        The Installation guide for DEC PATHWORKS

    PCNFS.TXT           The Installation guide for Sun PC-NFS


\NDIS\DOS

    EN120XD.NIF         Network Information File for IBM Lan Support Program
    ETHPCI.DOS          The DOS NDIS/2 driver
    OEMSETUP.INF        Network Information File for Windows for Workgroups
                        v3.11
    PROTOCOL.INI        A sample section of PROTOCOL.INI file


\NDIS\OS2

    EN120XO.NIF         Network Information File for IBM LAN Server 3.0, 4.0
    ETHPCI.OS2          The OS2 NDIS/2 driver
    PROTOCOL.INI        A sample section of PROTOCOL.INI file


Sample PROTOCOL.INI Files and Parameters
----------------------------------------
[ETHPCI_NIF]

  DriverName = ETHPCI$
; Slot = 1            ;; {1-16}
; SIA_Mode = AUTODETECT
; {SIA_Mode = TP, BNC, TP_FULL_DUPLEX, AUTODETECT}
; DATA_RATE = MB10   ;; {MB10, MB100}

There are several parameters included in the ETHPCI_NIF section of the
PROTOCOL.INI file. However, the only parameter that you should specify
is the "drivername."

If you change other parameter settings, such as the SIA_MODE, make sure
that it matches the hardware setting.  Otherwise, the adapter may fail.

If you don't specify these settings, Accton's NDIS/2 driver
will automatically detect them.


SLOT        Specifies which network adapter is used by the driver.  If you
            have only one Accton's PCI LAN card in your machine, this parameter
            is unnecessary!  For two or more Accton's PCI LAN cards, this
            parameter is required and cannot be omitted from PROTOCOL.INI.
            For the first EN1203 or EN1207(-TX/B-TX/C-TX) adapter, Slot=1, and
            the second one, Slot=2, third, Slot=3,..., etc.

SIA_MODE    Specifies the medium type used by the adapter.
            Acceptable values for this parameter are AUTODETECT, TP, BNC
            and TP_FULL_DUPLEX. If you didn't specify this settings it
            would be AUTODETECT for both EN1203 and EN1207(-TX/B-TX/C-TX).

DATA_RATE   Specifies the line speed for EN1207(-TX/B-TX/C-TX), default is
            MB100.

            MB100: 100Mbps, MB10: 10Mbps

            Note! Do not use this setting for the EN1203 adapter.

TX_THRESHOLD
            Specifies the FIFO threshold level during packet transmittion.
            Acceptable values for this parameter are

                          Level (bytes)        Support    Suppot
            Keywords  EN1203, EN1207 Series     EN1203   EN1207 Series
            ========    ==================     =======    ===========
              LW128       72    128              Yes          Yes
              LW256       96    256              Yes          Yes
              LW512      128    512              Yes          Yes
             LW1024      160   1024              Yes          Yes
               FP         X    full packet       No           Yes

-- END of File--