Graphtec Cutting Plotter Driver OPS662 Ver.2.30a
for Microsoft Windows 2000 / Windows XP /Windows Vista / Windows 7
Thank you for choosing the Graphtec OPS662 Cutting Plotter Driver.
The README.TXT file in each directory contains instructions on installation and
operation as well as other notes. Be sure to read them carefully before
installing or using this driver.
Before you begin installation, check that the program disk contains the
following:
GDSETUP.EXE
GDSETUP.INI
WIN2K_7\DISK1 For Windows 2000/XP/Vista/7
WIN2K_7\GPCUT.DLL
WIN2K_7\GPCUTUI.DLL
WIN2K_7\GPCUTUI.CHM
WIN2K_7\GPCUTMON.DLL
WIN2K_7\GPCUT.INF
WIN2K_7\GPCUT.CAT
WIN2K_7\README.TXT
WIN2K_7\CE30MK2.GPD
WIN2K_7\FC7000.GPD
WIN2K_7\FC2240.GPD
WIN2K_7\CE5000.GPD
WIN2K_7\FC2250.GPD
WIN2K_7\FC8000.GPD
WIN2K_7\FC4500.GPD
Required PC specifications
(The specification needs to be higher than recommended specification
by using OS)
* OS : Windows 2000 / Windows XP / Windows Vista / Windows 7
* CPU : Pentium 4 / AMD Athlon 64 800MHz or faster
* Memory : 1GB or larger
* Display : 1024x768 True Color
* Mouse
* CD-ROM drive
* Network interface : 10Base-T/100Base-TX
* USB interface : USB2.0(Full Speed)
* Serial interface : RS-232C
* Parallel interface : Centronics parallel interface
Note:
The interface which can be used depends on the plotter model.
The plotter needs to be connected with either interface.
Precautions to be observed when connecting the Graphtec Cutting Plotter
via USB.
* The plotter does not operate under Windows 3.1/95/98/98SE/Me or
Windows NT.
* Operation with other than the included driver is not guaranteed.
* Do not connect multiple plotters to a single computer.
* Operation is not guaranteed if the plotter is connected to a USB hub
or to a USB extension board.
END
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.