LANTASTI.TXT Driver File Contents (en1207txdrivers.zip)

.TOPIC:
Contents

=================================================================
                 ACCTON TECHNOLOGY CORPORATION
 EN1203, EN1207(-TX/B-TX) Series PCI-BUS (FAST) ETHERNET ADAPTER
         NDIS/2 DRIVER FOR LANTASTIC DRIVER INSTALLATION

        Copyright 1995-1997 ACCTON Technology Corporation
                      All rights reserved.
=================================================================

  Content:
  --------

      A) Install Accton drivers for LANtastic 5.0

      B) Install Accton drivers for LANtastic 6.0


A) Install Accton drivers for LANtastic 5.0
   ========================================

   LANtastic 5.0 can support following driver: NDIS driver


   Using NDIS driver:
   ----------------------
   For NDIS driver, Accton provides the "ETHPCI.DOS" driver for
   EN1203, EN1207 PCI series Ethernet adapter.  You can use
   "ETHPCI.DOS" driver to replace AEXNDIS.DOS which is the
   NDIS driver offered by ARTISOFT.

   Example  -----  CONFIG.SYS

        DEVICE=C:\LANTASTI\PROTMAN.DOS /I:C:\LANTASTI
        DEVICE=C:\LANTASTI\ETHPCI.DOS      -------> By Accton


   Example  -----  AUTOEXEC.BAT / STARTNET.BAT

        C:\LANTASTI\AI-NDIS BIND_TO=ETHPCI_NIF
        C:\LANTASTI\AILANBIO
        C:\LANTASTI\REDIR MachineName


   Example  -----  PROTOCOL.INI

        [PROTMAN]
           DRIVERNAME = PROTMAN$
           DYNAMIC = YES

        [ETHPCI_NIF]
           DRIVERNAME = ETHPCI$

   Comments:
     If you are using PROTMAN.DOS V1.x, you must use the NO_BIND
     option on the AI-NDIS command line in the STARTNET.BAT,
     and you need to run NETBIND.EXE V1.x before AILANBIO.EXE.


B) Install Accton drivers for LANtastic 6.0
   ========================================

   LANtastic 6.0 can support following driver: NDIS driver


  Using NDIS driver:
  ----------------------

   To install Accton's NDIS driver "ETHPCI.DOS", you can use the 
   LANtastic 6.0  install program, and select "NDIS support for
   network adapters" then insert Accton's EN1203, EN1207(-TX/B-TX) 
   driver diskette, and type path "A:\NDIS\DOS".  The Install program 
   will search for "ETHPCI.DOS" and "PROTOCOL.INI" and copy these 
   two files to the target directory.

   If you already installed LANtastic 6.0 and need to install
   Accton's PCI Ethernet Adapter, just replace AEXNDIS.DOS with
   Accton's NDIS driver "ETHPCI.DOS" at CONFIG.SYS

   "ETHPCI.DOS"  is an NDIS driver which supported by Accton
   "AEXNDIS.DOS" is an NDIS driver which supported by ARTISOFT


   Example  -----  CONFIG.SYS

        DEVICE=C:\LANTASTI\PROTMAN.DOS /I:C:\LANTASTI
        DEVICE=C:\LANTASTI\ETHPCI.DOS        -------> By Accton


   Example  -----  AUTOEXEC.BAT / STARTNET.BAT

    @echo ===== Begin LANtastic configuration =====
    SET LAN_CFG=C:\LANTASTI
    PATH C:\LANTASTI;%PATH%
    SET LAN_DIR=C:\LANTASTI.NET

    rem Please obtain the NETBEUI.EXE program from Microsoft
    NETBEUI
    AI-NDIS BIND_TO=AEXNDIS_NIF
    AILANBIO @STARTNET.CFG
    REDIR THOMAS @STARTNET.CFG

    SERVER C:\LANTASTI.NET @STARTNET.CFG
    NET LOGIN \\THOMAS
    @echo ===== End LANtastic configuration =====


   Example  -----  Protocol.ini

    [PROTMAN]
    Priority=NETBEUI
      DriverName = PROTMAN$
      Dynamic = Yes

    [NETBEUI_XIF]
      DriverName = netbeui$
      Sessions = 6
      NCBS = 12
      Bindings = ETHPCI_NIF
      LANABASE = 1

    [ETHPCI_NIF]
      DriverName = ETHPCI$

-----
All trademarks or brand names mentioned are properties
of their respective companies.

--- End of File ---


Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 1.01