' Sample Configuration Script ' ' 5/25/05 ' ' Initialize the Display. Should have this in all scripts. [UTILITY] RESP Clear [UTILITY] STAT Clear ' ' Clear the printer [HEX] 1B 40 ' ' Erase flash logo space [MESSAGE] 5-10 second delay to erase flash [WAIT] RCVT(1) 1D 40 31 ' ' Download monochrome logo to ID 01 [BMP] 01 TPGMono.bmp ' ' Wait 1/2 second while saving logo in flash [DELAY] 5 ' ' Set 55 watt mode [HEX] 1F 03 04 37 ' ' Set baud to 115200 with DTR flow control [HEX] 1B 5B 7D 1F 02 00 07 00 00 01 00 ' ' Reset Printer to get this configuration [MESSAGE] Wait 10 seconds for printer to reset [RESET] [DELAY] 100 ' ' Print logo to verify download [HEX] 1B 61 31 1D 2F 00 1B 61 30 ' ' Print a few blank lines below the logo [TEXT] [TEXT] ' ' Print Diagnostic form to verify new configuation [HEX] 1F 74 ' ' Clear the printer [HEX] 1B 40 ' ' print message indicating script complete [MESSAGE] Sample Configuration script complete 'Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.