Intel(R) PCH EG20T Software Drivers Release Note for WES.txt Driver File Contents (VTC1000_IOH.zip)

===============================================================================
Intel(R) Platform Controller Hub EG20T Drivers Package
for Windows Embedded Standard 2009

Release Notes
Copyright © 2010, Intel Corporation and/or its suppliers and licensors.
All rights reserved.
===============================================================================

Issues Resolved:

  2.3.0 
  (GbE)       
	[Quad: 620593] Enable capability via driver properties GUI to set the link speed and duplex mode.
	[Quad: 618112] Removed the restriction of Locally Administrated Address (MAC Adress) from Read only to Read/Write.
  	[Quad: 629551] Bug Fixed where default value of PHY register 0x16h is being overwritten by GBE driver with
		       some value which is not required.
	[Quad: 629540] Enable MAC address implementation for GbE without EEPROM support.

  (SATA)      
	[Quad: 629543] Resolved issue on BSOD failure while performing heavy stress test (BurnIn Test).
	               Modified SATA driver BusType from SCSI to ATA.
        [Quad: 626805] Modified Topcliff SATA Driver class from SCSI to ATA Class.

  (SPI), (UART), (USB), (PacketHub), (IEEE1588), (I2C), (GPIO),(DMA), (CAN)   Updated the version number.

History:
  2.2.0     Integrate each driver's package into one package.

    (CAN)     Resolved the OS hangs issue, when CAN tx side runs
              but rx side is not up.
    (GbE)     Resolved the issue that GbE driver may disturb sleep or
              hibernation, if the ethernet cable is connected.
    (PacketHub) Resolved the issue that GbE driver can not read MAC address
                correctly, if a BIOS enables ADE bit of Extended ROM Base
                Address Register in PCI space register when OS boots up.
    (UART)    Resolved the issue that UART can not send data, when UART cable
              is not connected.
    (USBC)    Appended in this package.
    (DMA), (GPIO), (I2C), (IEEE1588), (SATA), (SPI)    Updated the version number.
===============================================================================

Contents:

 [Package]
    |   Intel(R) PCH EG20T Software Drivers Release Note.txt ---------- This file.
    |   PCH_EG20T_230.sld --- Component definition of all PCH EG20T drivers.
    |   
    \---Drivers ------------- Driver files.
            iohcan.cat
            iohcan.inf
            iohcan.sys
            iohdma.cat
            iohdma.inf
            iohdma.sys
            iohgbe.sys
            iohgpio.cat
            iohgpio.inf
            iohgpio.sys
            iohi2c.cat
            iohi2c.inf
            iohi2c.sys
            iohieee1588.cat
            iohieee1588.inf
            iohieee1588.sys
            iohpcieqos.cat
            iohpcieqos.inf
            iohpcieqos.sys
            iohsata.cat
            iohsata.inf
            iohsata.sys
            iohserial.cat
            iohserial.inf
            iohserial.sys
            iohspi.cat
            iohspi.inf
            iohspi.sys
            iohusb.cat
            iohusb.inf
            iohusb.sys
            netioh.cat
            netioh.inf

===============================================================================

Description:

 This driver package is a component set for Windows* Embedded Standard 2009.

 Please import the components to the component database on your development
 machine using Microsoft Component Database Manager.

 PCH_EG20T_230.sld defines the dependency relationship of all the EG20T device
 drivers. After importing PCH_EG20T_230.sld in Microsoft Component Database 
 Manager, 'Intel(R) Platform Controller Hub EG20T' component appears in
 'Hardware\Chipset' node of Microsoft Target Designer's Component Browser.

 If importing to an existing database for WES 2009, please delete the old .sld file 
 before the new .sld file is imported.

===============================================================================

Software Sightings and/or Known Issues:
 Nil

Notes:
 Please make sure that you have read the Intel(R) PCH EG20T – Sightings Report, 
 available in EDC to understand the known PCH EG20T hardware issues before
 hand.

 Please refer to the Intel(R) PCH EG20T Drivers Programmer's Guides,
 available on EDC for additional information.


===============================================================================
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 1.31