# Copyright (c) By Dialogue Technology Corp. All rights reserved.
# 03/01/2010
#############################################################################
PenMount USB Driver Package for Windows CE.Net 6.0
1. Copy Penmount to $(_WINCEROOT)\Public
2. Please edit PM2USB.reg for hardware configuration. For example:
"HalfSpeed"=dword:1 ; set "HalfSpeed" = 1 to slow-down the sample rate
; of PenMount 6000.
"DisableEEPROM" = dword: 1 ; disable that storing calibrate data to EEPROM
; of controller.
"NoCal16"=dword:0 ; "NoCal16" - remove 16-point calibrate option from UI.
"DefaultCalib"=dword:9 ; "DefaultCalib" - setting defualt calibrate algorithm.
; 0 --> Standard Calibrate
; 4 --> Advanced 4-Points Calibrate
; 9 --> Advanced 9-Points Calibrate
; 10--> Advanced 16-Points Calibrate
(PS: These registries is useless for PenMount 5000)
(PS2: This driver can detect the controller (6000U or 5000). )
3. Open your OSDesign.
4. Refresh "Catalog Items View". If you can't see "PenMount2 XXX"
5. Check the box of "PenMount2 XXX" item.
6. Build "Subprojects--> XXX". If your OSDesign had built.
Or You must build your OSDesign.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.