.TOPIC: Contents Accton Technology Corporation NDIS/3 driver for PCI Ethernet adapter ====================================== The drivers contained in the directory \WINNT is for the following Accton Ethernet adapter: EtherDuo-PCI ( EN1203 ) Fast EtherCombo-TX PCI ( EN1207 ) Fast EtherPair-TX PCI ( EN1207-TX AND EN1207B-TX) They are used with Microsoft Windows NT Release 3.5, 3.51 or 4.0 on the X86 platform. The driver named ACCPCI conforms to the Network Driver Interface Specification (NDIS) 3.0. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ File Description ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ WNT35\ACCPCI.SY_ NDIS/3 driver for EN1203 & EN1207(-TX) Series on NT 3.5 WNT40\ACCPCI.SY_ NDIS/3 driver for EN1203 & EN1207(-TX) Series on NT 3.51 or 4.0 ACCPCI.HL_ the help file during driver installation README.TXT this documentation file ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Installing driver on Microsoft Windows NT ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 1) In the Main group of NT, choose the Control Panel icon. 2) In the Control Panel window, choose the Network icon. 3) In the Network Settings dialog box, choose the Add Adapter button. The Add Network Adapter dialog box appears. 4) In the list of network cards, select "<other> Requires disk from manufacturer", and then press <Enter> button. 5) Insert this driver disk in drive A, enter drive and pathname A:\ and then choose the OK button. 6) In the Select OEM Option dialog box, you will see the following products in the menu, select the exact product and use OK button to install it. Accton EN1203 PCI Ethernet Adapter Accton EN1207(-TX) Series PCI Fast Ethernet Adapter 7) And then Accton EN1207(-TX) Series PCI Fast Ethernet Adapter Setup dialog box appear, (if you choose EN1203, a different dialog box with header "Accton EN1203 PCI Ethernet Adapter Setup" appears) you must specify "Connection Type" of the adapter plugged in your PC. Because netcard detection function does not support in SETUP program, please make sure these setting matching your adapter's configurations. Otherwise the network ability of Windows NT can not work properly. The connection types for EN1203 are ----------------------------------- AutoDetect ; performs automatic media ; detection during driver ; initialization. Twisted_Pair (10BaseT) ; RJ-45 connector. Twisted_Pair - Full_Duplex ; communication in full ; duplex mode, ; speed is 20Mbps Twisted_Pair - No_Link_Test ; support Hub which does not ; generate ; link pulses BNC (10Base2) ; 10BASE2 connector. The connection types for EN1207(-TX) Series are ---------------------------------------- AutoSense ; perform automatic media ; detection during driver ; initialization. 10BaseT ; RJ-45 connector, line speed is ; 10 Mega bits per second. 10BaseT Full_Duplex ; communication in full duplex mode, ; speed is 20Mbps. BNC (10Base2) ; 10BASE2 connector. ; NOT support EN1207-TX Series 100BaseTx ; RJ-45 connector, line speed is ; 100 Mega bits per second. 100BaseTx Full_Duplex ; communication in full duplex mode, ; speed is 200Mbps. 8) After that, installation is completed. Accton's adapter becomes one of those Installed Adapter Cards and driver become one of those Installed Network Software. You can see: "[x]Accton EN1207(-TX) Series PCI Fast Ethernet Adapter" within Installed Adapter Cards menu and "Accton EN120x Bus Master PCI Adapter Driver" within Installed Network Software menu. 9) Now, the SETUP program has already copied ACCPCI.SY_ from A:\WINNT directory to C:\WINNT\SYSTEM32\DRIVERS\ACCPCI.SYS and the OEMSETUP.INF from A:\WINNT to C:\WINNT\SYSTEM32 but renamed it to other installation information file (like OEMNAD??.INF). So next time, if you want to add Accton's adapters to your system, you do not need floppy diskette again. (You should skip the file copy operation instead of inserting floppy diskette again) NOTICE!! C:\WINNT is the directory where your NT O.S. is located. 10) To complete network installation, remember binding the adapter to transport drivers by choosing "Bindings" button under Network Setting dialog box. 11) Restarting your system you will acquire network service. Trademarks: Microsoft Windows NT is a trademark of Microsoft Corporation. --- End of File ---Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.