ATI RS300 (Radeon 9100IGP) chipset (9100IGP + ATI-SB South bridge, Socket 478) microATX Motherboard Award BIOS A0308_1.BIN BIOS for (9100IGP + ATI-SB South Bridge + ITE IO Chip) *** with Hardware Monitor *** with STR (Suspend-To-RAM) *** PCB Ver. 01 (no Chasis-Open Detect/Alarm) A0308_2.BIN BIOS for (9100IGP + ATI-SB South Bridge + ITE IO Chip) *** with Hardware Monitor *** with STR (Suspend-To-RAM) *** PCB Ver.02 (with Chasis-Open Detect/Alarm) .4MBit Flash .Oct/2003 built core .Initial mass production release .For first PCB (Ver. 01), no Chasis-Open Detect/Alarm function (Oct/2003) .4MBit Flash .Added feature for the PCB Ver.02 .For second PCB (Ver. 02), with Chasis-Open Detect/Alarm function (Nov/2003) .4MBit Flash .For second PCB (Ver. 02), with Chasis-Open Detect/Alarm function .Added CMOS "Memory Enhancement" for improvement of RAM performance (Nov/2003) .4MBit Flash .Dec/2003 updated core .Added CMOS Setup : RAM "16 Load Full Speed" setting .Added POST Screen : show "128-Bit" for Dual-Channel RAM access .Corrected DMICFG.EXE issue (sometime "no DMI Structure") .Corrected issue (sometime unable to resume from S3) (Dec/2003) .4MBit Flash .Feb/2004 updated core .Updated the VGA portion of BIOS, fixed screen corruption in Multi-media file playback .Added CMOS RAM control - option to limit to "DDR-333" maximum (Feb/2004) .4MBit Flash .End/Feb/2004 updated core .Added support for intel "Prescott" CPUs .Added "SurroundView" function for multi-display with add-on Radeon AGP Card (End/Feb/2004) .4MBit Flash .March/2004 updated .Rebuilt the CMOS option "Limited DRAM Frequency" (limit to DDR-333) .Corrected the garbage "default content" of BIOSLOCK-String on previous BIOS (March/2004) Remark : ======= 1) Please identify the PCB Versions (01/02), before picking the BIOS file to match to the exact hardware. The PCB Ver.02 (with Chasis-Open Detect/Alarm) carries the connector JP12, near the on-board speaker at the left edge of the PCB. 2) Due to a change in the "default content" of the BIOSLOCK-String, the error message " Program file's BIOS Lock String does not match with your system" may be shown when trying to upgrade BIOS from a previous version. If this is the case, please add the extra software switch [/F] when using the Phoenix / Award Flash Upgrade Tool (AWDFLASH.EXE). This will skip the comparison of BIOS-Lock String. That is : -> AWDFLASH xxxxxxx.BIN /FDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.