arc.inf Driver File Contents (icp_windows_xp-x64_w2k3-x86-x64_vista-x86-x64_b15317_cert.exe)

;
; arc.inf for Adaptec RAID controllers.
; This INF installs the x64 miniport and its coinstaller.
;
; Copyright 2007 Adaptec, Inc. All rights reserved.
; 
; This software contains the valuable trade secrets of Adaptec or its licensors.
; The software is protected under international copyright laws and treaties.
; This software may only be used in accordance with the terms of its accompanying license agreement.
;
  
[Version]
Signature = "$Windows NT$"
Class = SCSIAdapter
ClassGUID = {4d36e97b-e325-11ce-bfc1-08002be10318}
Provider = %ADPT%
CatalogFile = arc.cat
DriverVer=09/15/2007,5.2.0.15317

[ControlFlags]
ExcludeFromSelect = *

[SourceDisksNames]
1 = %disk1%, raidisk1,

[SourceDisksFiles]
arc.sys = 1

[DeviceDriverFiles]
arc.sys, arc.sys, narc.sys, 0x00000000

[DestinationDirs]
DefaultDestDir = 12



; ===============================================================
; =================== Table of contents =========================
; ===============================================================


[Manufacturer]
%ADPT% = ADPT, NTamd64

;------------------------------------;
; Windows XP 64-bit & above (64-bit) ;
;------------------------------------;
[ADPT.NTamd64]
%adptVulcan.DeviceDesc% = arc_Inst, 		PCI\VEN_9005&DEV_0285&SUBSYS_02859005

%adptVulcan.DeviceDesc% = arc_Inst, 		PCI\VEN_9005&DEV_0285&SUBSYS_02879005

%adptCrusader.DeviceDesc% = arc_Inst, 	        PCI\VEN_9005&DEV_0285&SUBSYS_02869005
					
%adptSkyhawkscsi.DeviceDesc% = arc_Inst, 	PCI\VEN_9005&DEV_0285&SUBSYS_028A9005

%adptSkyhawksata.DeviceDesc% = arc_Inst, 	PCI\VEN_9005&DEV_0285&SUBSYS_028E9005
					
%adptTerminatorscsi.DeviceDesc% = arc_Inst, 	PCI\VEN_9005&DEV_0285&SUBSYS_028B9005

%adptTerminatorsata.DeviceDesc% = arc_Inst, 	PCI\VEN_9005&DEV_0285&SUBSYS_028F9005

%adptJaguar.DeviceDesc% = arc_Inst, 		PCI\VEN_9005&DEV_0285&SUBSYS_02909005

%adptCorsair8.DeviceDesc% = arc_Inst, 	        PCI\VEN_9005&DEV_0285&SUBSYS_02929005

%adptCorsair16.DeviceDesc% = arc_Inst, 	        PCI\VEN_9005&DEV_0285&SUBSYS_02939005

%adptLancer2ch.DeviceDesc% = arc_Inst,  	PCI\VEN_9005&DEV_0286&SUBSYS_028C9005

%adptLancer1ch.DeviceDesc% = arc_Inst,  	PCI\VEN_9005&DEV_0286&SUBSYS_028D9005

%adptBearcat.DeviceDesc% = arc_Inst,  	        PCI\VEN_9005&DEV_0285&SUBSYS_3227103C

%ICPLancer2ch.DeviceDesc% = arc_Inst,  	        PCI\VEN_9005&DEV_0286&SUBSYS_029E9005

%ICPLancer1ch.DeviceDesc% = arc_Inst,  	        PCI\VEN_9005&DEV_0286&SUBSYS_029F9005


;----------------------------------------------------------;
; Block Windows 2000 and all other 32-bit Windows versions ;
;----------------------------------------------------------;
[ADPT]
; empty


; ==============================================================
; =================== Install Sections =========================
; ==============================================================

;-------------------------------------------;
; Install section for the Storport miniport ;
;-------------------------------------------;
[arc_Inst.NT]
CopyFiles = DeviceDriverFiles
AddReg = ScsiDiskReg

[arc_Inst.NT.Services]
AddService = arc, %SPSVCINST_ASSOCSERVICE%, arc_Service_Inst



; ==============================================================
; ================== Service install sections ==================
; ==============================================================

[arc_Service_Inst]
DisplayName    = %arc_ServiceName%
ServiceType    = %SERVICE_KERNEL_DRIVER%
StartType      = %SERVICE_BOOT_START%
ErrorControl   = %SERVICE_ERROR_NORMAL%
ServiceBinary  = %12%\arc.sys
LoadOrderGroup = SCSI miniport
AddReg         = arc_Parameters_Inst
AddReg         = Bus_Type_Raid


; =======================================================
; ================== Registry sections ==================
; =======================================================

;----------------------------------------------------------------;
; Hardware-specific registry additions (under Parameters subkey) ;
;----------------------------------------------------------------;
[arc_Parameters_Inst]
HKR, "Parameters\PnpInterface", "5", %FLG_ADDREG_TYPE_REG_DWORD%, 1
HKR, "Parameters\Device", "NumberOfRequests", %FLG_ADDREG_TYPE_REG_DWORD%, 254
HKR, "Parameters\Device", "DriverParameter", %FLG_ADDREG_TYPE_SZ%, "BLEDCheck=1"

[Bus_Type_Raid]
HKR, "Parameters", "BusType", %FLG_ADDREG_TYPE_REG_DWORD%, 0x00000008


;-------------------------;
; Misc. registry sections ;
;-------------------------;
[ScsiDiskReg]
HKLM,SYSTEM\CurrentControlSet\Services\Disk,TimeOutValue,0x00010001,0x0000003C


; ======================================================
; ================== Strings sections ==================
; ======================================================

[Strings]

ADPT = "Adaptec"
disk1 = "Adaptec RAID Windows 2003 X64 Device Drivers"
adptVulcan.DeviceDesc = "Adaptec SCSI RAID 2200S Controller"
adptCrusader.DeviceDesc = "Adaptec SCSI RAID 2120S Controller"
adptSkyhawkscsi.DeviceDesc = "Adaptec SCSI RAID 2020ZCR Controller"
adptSkyhawksata.DeviceDesc = "Adaptec SATA RAID 2020SA Controller"
adptTerminatorscsi.DeviceDesc = "Adaptec SCSI RAID 2025ZCR Controller"
adptTerminatorsata.DeviceDesc = "Adaptec SATA RAID 2025SA Controller"
adptJaguar.DeviceDesc = "Adaptec SATA RAID 2410SA Controller"
adptCorsair8.DeviceDesc = "Adaptec SATA RAID 2810SA Controller"
adptCorsair16.DeviceDesc = "Adaptec SATA RAID 21610SA Controller"
adptLancer2ch.DeviceDesc = "Adaptec SCSI RAID 2230S Controller"
adptLancer1ch.DeviceDesc = "Adaptec SCSI RAID 2130S Controller"
adptBearcat.DeviceDesc = "Adaptec SATA RAID 2610SA Controller"
ICPLancer2ch.DeviceDesc = "ICP SCSI RAID ICP9024RO Controller"
ICPLancer1ch.DeviceDesc = "ICP SCSI RAID ICP9014RO Controller"
arc_ServiceName = "Adaptec RAID Storport's Miniport Driver"


;=================================================================
;========== Handy macro substitutions (non-localizable) ==========
;=================================================================
COPYFLG_FORCE_FILE_IN_USE = 0x00000008 
SPSVCINST_ASSOCSERVICE = 0x00000002
SPSVCINST_NOCLOBBER_DISPLAYNAME = 0x00000008
SERVICE_KERNEL_DRIVER  = 1
SERVICE_WIN32_OWN_PROCESS = 0x10
SERVICE_BOOT_START     = 0
SERVICE_SYSTEM_START   = 1
SERVICE_AUTO_START     = 2
SERVICE_DEMAND_START   = 3
SERVICE_NO_START       = 4
SERVICE_ERROR_IGNORE   = 0
SERVICE_ERROR_NORMAL   = 1
FLG_ADDREG_TYPE_SZ = 0x00000000
FLG_ADDREG_TYPE_EXPAND_SZ = 0x00020000
FLG_ADDREG_TYPE_MULTI_SZ = 0x00010000
FLG_ADDREG_TYPE_REG_DWORD  = 0x00010001

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 1.30