SNMPv2-TM DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-IDENTITY, snmpModules, snmpDomains, snmpProxys FROM SNMPv2-SMI TEXTUAL-CONVENTION FROM SNMPv2-TC; snmpv2tm MODULE-IDENTITY LAST-UPDATED "200210160000Z" ORGANIZATION "IETF SNMPv3 Working Group" CONTACT-INFO "WG-EMail: snmpv3@lists.tislabs.com Subscribe: snmpv3-request@lists.tislabs.com Co-Chair: Russ Mundy Network Associates Laboratories postal: 15204 Omega Drive, Suite 300 Rockville, MD 20850-4601 USA EMail: mundy@tislabs.com phone: +1 301 947-7107 Co-Chair: David Harrington Enterasys Networks postal: 35 Industrial Way P. O. Box 5005 Rochester, NH 03866-5005 USA EMail: dbh@enterasys.com phone: +1 603 337-2614 Editor: Randy Presuhn BMC Software, Inc. postal: 2141 North First Street San Jose, CA 95131 USA EMail: randy_presuhn@bmc.com phone: +1 408 546-1006" DESCRIPTION "The MIB module for SNMP transport mappings. Copyright (C) The Internet Society (2002). This version of this MIB module is part of RFC 3417; see the RFC itself for full legal notices. " REVISION "200210160000Z" DESCRIPTION "Clarifications, published as RFC 3417." REVISION "199601010000Z" DESCRIPTION "Clarifications, published as RFC 1906." REVISION "199304010000Z" DESCRIPTION "The initial version, published as RFC 1449." ::= { snmpModules 19 } -- SNMP over UDP over IPv4 snmpUDPDomain OBJECT-IDENTITY STATUS current DESCRIPTION "The SNMP over UDP over IPv4 transport domain. The corresponding transport address is of type SnmpUDPAddress." ::= { snmpDomains 1 } SnmpUDPAddress ::= TEXTUAL-CONVENTION DISPLAY-HINT "1d.1d.1d.1d/2d" STATUS current DESCRIPTION "Represents a UDP over IPv4 address: octets contents encoding 1-4 IP-address network-byte order 5-6 UDP-port network-byte order " SYNTAX OCTET STRING (SIZE (6)) -- SNMP over OSI snmpCLNSDomain OBJECT-IDENTITY STATUS current DESCRIPTION "The SNMP over CLNS transport domain. The corresponding transport address is of type SnmpOSIAddress." ::= { snmpDomains 2 } snmpCONSDomain OBJECT-IDENTITY STATUS current DESCRIPTION "The SNMP over CONS transport domain. The corresponding transport address is of type SnmpOSIAddress." ::= { snmpDomains 3 } SnmpOSIAddress ::= TEXTUAL-CONVENTION DISPLAY-HINT "*1x:/1x:" STATUS current DESCRIPTION "Represents an OSI transport-address: octets contents encoding 1 length of NSAP 'n' as an unsigned-integer (either 0 or from 3 to 20) 2..(n+1) NSAP concrete binary representation (n+2)..m TSEL string of (up to 64) octets " SYNTAX OCTET STRING (SIZE (1 | 4..85)) -- SNMP over DDP snmpDDPDomain OBJECT-IDENTITY STATUS current DESCRIPTION "The SNMP over DDP transport domain. The corresponding transport address is of type SnmpNBPAddress." ::= { snmpDomains 4 } SnmpNBPAddress ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents an NBP name: octets contents encoding 1 length of object 'n' as an unsigned integer 2..(n+1) object string of (up to 32) octets n+2 length of type 'p' as an unsigned integer (n+3)..(n+2+p) type string of (up to 32) octets n+3+p length of zone 'q' as an unsigned integer (n+4+p)..(n+3+p+q) zone string of (up to 32) octets For comparison purposes, strings are case-insensitive. All strings may contain any octet other than 255 (hex ff)." SYNTAX OCTET STRING (SIZE (3..99)) -- SNMP over IPX snmpIPXDomain OBJECT-IDENTITY STATUS current DESCRIPTION "The SNMP over IPX transport domain. The corresponding transport address is of type SnmpIPXAddress." ::= { snmpDomains 5 } SnmpIPXAddress ::= TEXTUAL-CONVENTION DISPLAY-HINT "4x.1x:1x:1x:1x:1x:1x.2d" STATUS current DESCRIPTION "Represents an IPX address: octets contents encoding 1-4 network-number network-byte order 5-10 physical-address network-byte order 11-12 socket-number network-byte order " SYNTAX OCTET STRING (SIZE (12)) -- for proxy to SNMPv1 (RFC 1157) rfc1157Proxy OBJECT IDENTIFIER ::= { snmpProxys 1 } rfc1157Domain OBJECT-IDENTITY STATUS deprecated DESCRIPTION "The transport domain for SNMPv1 over UDP over IPv4. The corresponding transport address is of type SnmpUDPAddress." ::= { rfc1157Proxy 1 } -- ::= { rfc1157Proxy 2 } this OID is obsolete ENDDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.