1. pre_TPG0590_v7.1.13__VC.zip Driver
2. SNMP-USM-AES-MIB.txt File Contents

SNMP-USM-AES-MIB.txt Driver File Contents (pre_TPG0590_v7.1.13__VC.zip)

SNMP-USM-AES-MIB DEFINITIONS ::= BEGIN
    IMPORTS
        MODULE-IDENTITY, OBJECT-IDENTITY,
        snmpModules             FROM SNMPv2-SMI          -- [RFC2578]
        snmpPrivProtocols       FROM SNMP-FRAMEWORK-MIB; -- [RFC3411]

snmpUsmAesMIB  MODULE-IDENTITY
    LAST-UPDATED "200406140000Z"
    ORGANIZATION "IETF"
    CONTACT-INFO "Uri Blumenthal
                  Lucent Technologies / Bell Labs
                  67 Whippany Rd.
                  14D-318
                  Whippany, NJ  07981, USA
                  973-386-2163
                  uri@bell-labs.com

                  Fabio Maino
                  Andiamo Systems, Inc.
                  375 East Tasman Drive
                  San Jose, CA  95134, USA
                  408-853-7530
                  fmaino@andiamo.com

                  Keith McCloghrie
                  Cisco Systems, Inc.
                  170 West Tasman Drive
                  San Jose, CA  95134-1706, USA

                  408-526-5260
                  kzm@cisco.com"
    DESCRIPTION  "Definitions of Object Identities needed for
                  the use of AES by SNMP's User-based Security
                  Model.

                  Copyright (C) The Internet Society (2004).

            This version of this MIB module is part of RFC 3826;
            see the RFC itself for full legal notices.
            Supplementary information may be available on
            http://www.ietf.org/copyrights/ianamib.html."
    REVISION     "200406140000Z"
    DESCRIPTION  "Initial version, published as RFC3826"

    ::= { snmpModules 20 }

usmAesCfb128Protocol OBJECT-IDENTITY
    STATUS        current
    DESCRIPTION  "The CFB128-AES-128 Privacy Protocol."
    REFERENCE    "- Specification for the ADVANCED ENCRYPTION
                    STANDARD. Federal Information Processing
                    Standard (FIPS) Publication 197.
                    (November 2001).

                  - Dworkin, M., NIST Recommendation for Block
                    Cipher Modes of Operation, Methods and
                    Techniques. NIST Special Publication 800-38A
                    (December 2001).
                 "
    ::= { snmpPrivProtocols 4 }

END

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.