LM-SENSORS-MIB DEFINITIONS ::= BEGIN
--
-- Derived from the original VEST-INTERNETT-MIB. Open issues:
--
-- (a) where to register this MIB?
-- (b) use not-accessible for diskIOIndex?
--
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Gauge32
FROM SNMPv2-SMI
DisplayString
FROM SNMPv2-TC
ucdExperimental
FROM UCD-SNMP-MIB;
lmSensorsMIB MODULE-IDENTITY
LAST-UPDATED "200011050000Z"
ORGANIZATION "AdamsNames Ltd"
CONTACT-INFO
"Primary Contact: M J Oldfield
email: m@mail.tc"
DESCRIPTION
"This MIB module defines objects for lm_sensor derived data."
REVISION "200011050000Z"
DESCRIPTION
"Derived from DISKIO-MIB ex UCD."
::= { lmSensors 1 }
lmSensors OBJECT IDENTIFIER ::= { ucdExperimental 16 }
--
lmTempSensorsTable OBJECT-TYPE
SYNTAX SEQUENCE OF LMTempSensorsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of temperature sensors and their values."
::= { lmSensors 2 }
lmTempSensorsEntry OBJECT-TYPE
SYNTAX LMTempSensorsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing a device and its statistics."
INDEX { lmTempSensorsIndex }
::= { lmTempSensorsTable 1 }
LMTempSensorsEntry ::= SEQUENCE {
lmTempSensorsIndex Integer32,
lmTempSensorsDevice DisplayString,
lmTempSensorsValue Gauge32
}
lmTempSensorsIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reference index for each observed device."
::= { lmTempSensorsEntry 1 }
lmTempSensorsDevice OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the temperature sensor we are reading."
::= { lmTempSensorsEntry 2 }
lmTempSensorsValue OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The temperature of this sensor in mC."
::= { lmTempSensorsEntry 3 }
--
lmFanSensorsTable OBJECT-TYPE
SYNTAX SEQUENCE OF LMFanSensorsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of fan sensors and their values."
::= { lmSensors 3 }
lmFanSensorsEntry OBJECT-TYPE
SYNTAX LMFanSensorsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing a device and its statistics."
INDEX { lmFanSensorsIndex }
::= { lmFanSensorsTable 1 }
LMFanSensorsEntry ::= SEQUENCE {
lmFanSensorsIndex Integer32,
lmFanSensorsDevice DisplayString,
lmFanSensorsValue Gauge32
}
lmFanSensorsIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reference index for each observed device."
::= { lmFanSensorsEntry 1 }
lmFanSensorsDevice OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the fan sensor we are reading."
::= { lmFanSensorsEntry 2 }
lmFanSensorsValue OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The rotation speed of the fan in RPM."
::= { lmFanSensorsEntry 3 }
--
lmVoltSensorsTable OBJECT-TYPE
SYNTAX SEQUENCE OF LMVoltSensorsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of voltage sensors and their values."
::= { lmSensors 4 }
lmVoltSensorsEntry OBJECT-TYPE
SYNTAX LMVoltSensorsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing a device and its statistics."
INDEX { lmVoltSensorsIndex }
::= { lmVoltSensorsTable 1 }
LMVoltSensorsEntry ::= SEQUENCE {
lmVoltSensorsIndex Integer32,
lmVoltSensorsDevice DisplayString,
lmVoltSensorsValue Gauge32
}
lmVoltSensorsIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reference index for each observed device."
::= { lmVoltSensorsEntry 1 }
lmVoltSensorsDevice OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the device we are reading."
::= { lmVoltSensorsEntry 2 }
lmVoltSensorsValue OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The voltage in mV."
::= { lmVoltSensorsEntry 3 }
--
lmMiscSensorsTable OBJECT-TYPE
SYNTAX SEQUENCE OF LMMiscSensorsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of miscellaneous sensor devices and their values."
::= { lmSensors 5 }
lmMiscSensorsEntry OBJECT-TYPE
SYNTAX LMMiscSensorsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing a device and its statistics."
INDEX { lmMiscSensorsIndex }
::= { lmMiscSensorsTable 1 }
LMMiscSensorsEntry ::= SEQUENCE {
lmMiscSensorsIndex Integer32,
lmMiscSensorsDevice DisplayString,
lmMiscSensorsValue Gauge32
}
lmMiscSensorsIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reference index for each observed device."
::= { lmMiscSensorsEntry 1 }
lmMiscSensorsDevice OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the device we are reading."
::= { lmMiscSensorsEntry 2 }
lmMiscSensorsValue OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this sensor."
::= { lmMiscSensorsEntry 3 }
END
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.