ACS CCID PC/SC Driver 1.0.2 for Linux/Mac OS X
Advanced Card Systems Ltd.
Contents
----------------
1. Release Notes
2. Installation
3. History
4. File Contents
5. Limitations
6. Support
1. Release Notes
----------------
Version: 1.0.2
Release Date: 16/3/2011
Supported Readers
ACR38U-CCID
ACR3801
ACR83U
ACR85 PINPad Reader
ACR88U
ACR100-CCID
ACR100 ICC Reader
ACR101 ICC Reader
ACR102 ICC Reader
ACR122U
ACR122T
ACR122U-SAM
ACR1222 Dual Reader
ACR1222 1SAM Dual Reader
ACR1222L 3S CL Reader
ACR125 nPA plus
ACR128U
ACR1281 CL Reader (qPBOC)
ACR1281 Dual Reader (qPBOC)
ACR1281 PICC Reader (BSI)
ACR1281 Dual Reader (BSI)
APG8201
Operating Systems
Linux
Mac OS X 10.5/10.6
2. Installation
---------------
1. Login as root.
2. Enter the following commands to unpack the driver source code.
# tar -jxvf acsccid-1.0.2.tar.bz2
# cd acsccid-1.0.2
3. Enter the following commands to install the driver. If you want to use udev,
please enter "./configure --enable-udev". For more information, please refer
to the file "acsccid-1.0.2/INSTALL".
# ./configure
# make
# make install
4. To build the driver in Mac OS X, please install development tools from
Apple and install libusb-0.1. Enter the following commands to install the
driver.
# ./MacOSX/configure
# make
# make install
3. History
----------
v1.0.0 (26/8/2009)
1. New release
2. Based on ccid-1.3.11 (http://pcsclite.alioth.debian.org/ccid.html).
3. Change CmdPowerOn() read timeout in IFDHPowerICC() from 60 seconds to 4
seconds.
v1.0.0 (18/9/2009)
1. Import Mac OS X 10.5 configure script from ccid-1.3.11.
2. Update AUTHORS and COPYING files.
3. Disable interrupt read in ccid_open_hack_pre() for all readers. It will cause
the driver hang in ACR88U and ACR128U readers on Mac OS X.
4. There is a pcscd problem supporting multi-slot readers on Mac OS X. It will
create duplicate reader name for each slot. ACR88U and ACR128U readers are
affected by this bug. For more information, please refer to
http://www.opensc-project.org/sca/wiki/LeopardBugs.
v1.0.0 (14/10/2009)
1. Test the driver on Mac OS X 10.6.
v1.0.1 (9/11/2009)
1. Remove firmware version check.
2. Modify the driver to use separate thread to poll the slot ICC states from
interrupt endpoint.
v1.0.2 (2/2/2010)
1. Do not use separate thread to poll the slot ICC status due to poor
performance of libusb v0.1.12.
2. Enable polling mode automatically for ACR122U v2.06.
v1.0.2 (17/6/2010)
1. Add ACR125 nPA plus support.
v1.0.2 (22/11/2010)
1. Add ACR1281 PICC Reader (BSI) support.
2. Import Mac OS X 10.6 configure script from ccid-1.3.12.
v1.0.2 (17/12/2010)
1. Add the following readers support:
ACR1281 Dual Reader (qPBOC)
ACR1222 Dual Reader
ACR1222 1SAM Dual Reader
ACR83U
ACR85 PINPad Reader
APG8201
2. Secure PIN Entry (SPE) support for ACR83U requires firmware version 4500 or
later.
3. Add SCARD_CTL_CODE(3500) support for sending CCID escape command.
v1.0.2 (28/1/2011)
1. Add the following readers support:
ACR100 ICC Reader
ACR101 ICC Reader
ACR102 ICC Reader
ACR1222L 3S CL Reader
ACR1281 CL Reader (qPBOC)
ACR1281 Dual Reader (BSI)
2. Fix a bug that APG8201 and ACR85 cannot receive command properly if command
length is greater than 64 bytes.
3. Set infinite timeout in T=0, Short APDU and Extended APDU exchange.
4. Simulate ACR1281 Dual Reader (composite device) as multi-slot reader.
5. Improve performance and stability for ACR122U v2.00 - v2.04.
6. Replace acx_pthread.m4 with ax_pthread.m4 from autoconf archive.
v1.0.2 (14/2/2011)
1. Add the following driver options and these options are enabled by default:
DRIVER_OPTION_REMOVE_PUPI_FROM_ATR
Remove PUPI from ATR if ISO 14443-B card is detected (ACR1222).
DRIVER_OPTION_DISABLE_PICC
Disable PICC if ICC is inserted (ACR1222).
v1.0.2 (21/2/2011)
1. Add DRIVER_OPTION_REMOVE_PUPI_FROM_ATR and DRIVER_OPTION_DISABLE_PICC driver
options to ACR85.
2. Simulate ACR85 as multi-slot reader. The first slot is ICC and the second
slot is PICC.
3. Add firmware version check for ACR1222. The driver options are for ACR1222
v401 only.
v1.0.2 (16/3/2011)
1. Fix reader hang problem by checking card status of ACR85 PICC if SW1SW2
"63 00" is received.
2. Add ACR3801 support.
4. File Contents
----------------
.
|-- AUTHORS
|-- COPYING
|-- ChangeLog
|-- INSTALL
|-- MacOSX
| |-- configure
| |-- convert_reader_h.pl
| |-- debuglog.h
| |-- ifdhandler.h
| |-- pcsclite.h
| |-- reader.h.in
| |-- winscard.h
| `-- wintypes.h
|-- Makefile.am
|-- Makefile.in
|-- NEWS
|-- README
|-- aclocal.m4
|-- bootstrap
|-- config
| |-- compile
| |-- config.guess
| |-- config.sub
| |-- depcomp
| |-- install-sh
| |-- ltmain.sh
| |-- missing
| `-- ylwrap
|-- config.h.in
|-- configure
|-- configure.ac
|-- m4
| |-- Makefile.am
| |-- Makefile.in
| `-- ax_pthread.m4
`-- src
|-- Info.plist.src
|-- Makefile.am
|-- Makefile.in
|-- ccid.c
|-- ccid.h
|-- ccid_ifdhandler.h
|-- ccid_usb.c
|-- ccid_usb.h
|-- commands.c
|-- commands.h
|-- convert_version.pl
|-- create_Info_plist.pl
|-- debug.c
|-- debug.h
|-- defs.h
|-- ifdhandler.c
|-- misc.h
|-- openct
| |-- LICENSE
| |-- buffer.c
| |-- buffer.h
| |-- checksum.c
| |-- checksum.h
| |-- proto-t1.c
| `-- proto-t1.h
|-- parser.h
|-- pcscd_acsccid.rules
|-- strlcpy.c
|-- strlcpycat.h
|-- supported_readers.txt
|-- tokenparser.l
|-- towitoko
| |-- COPYING
| |-- README
| |-- atr.c
| |-- atr.h
| |-- defines.h
| |-- pps.c
| `-- pps.h
|-- utils.c
`-- utils.h
5. Limitations
--------------
6. Support
----------
In case of problem, please contact ACS through:
Web Site: http://www.acs.com.hk/
E-mail: info@acs.com.hk
Tel: +852 2796 7873
Fax: +852 2796 1286
-----------------------------------------------------------------
Copyright
Copyright by Advanced Card Systems Ltd. (ACS) No part of this reference manual
may be reproduced or transmitted in any from without the expressed, written
permission of ACS.
Notice
Due to rapid change in technology, some of specifications mentioned in this
publication are subject to change without notice. Information furnished is
believed to be accurate and reliable. ACS assumes no responsibility for any
errors or omissions, which may appear in this document.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.