MDMMGCS.INF Driver File Contents (es50f-sw-orig.zip)

[Version]
LayoutFile=layout.inf
Signature="$CHICAGO$"
Class=Modem
ClassGUID={4D36E96D-E325-11CE-BFC1-08002BE10318}
Provider=%MGCS%

[Manufacturer]
%MGCS% = MGCS

; models
[MGCS]
%Modem1% = MFP1, MDMDEVICE20

; Installation sections
; --------------------------------------------------------------
[MFP1]
AddReg = All, MfgAddReg, MFP1.AddReg


; Model specific AddReg sections
; --------------------------------------------------------------
[MFP1.AddReg]
HKR,, DeviceType, 1, 01      ; External
HKR,, Properties, 1, c0,01,00,00, ff,00,00,00, ff,00,00,00, 07,00,00,00, 0f,00,00,00, 77,03,00,00, 00,c2,01,00, 80,70,00,00
HKR,, FClass, 1, d7,00,00,00
HKR,, DCB, 1, 1c,00,00,00,00,e1,00,00,11,03,00,00,00,00,0a,00,0a,00,08,00,00,11,13,00,00,00,70,bf
HKR,, Default, 1, 3c,00,00,00,00,00,00,00,00,00,00,00,01,00,00,00,63,01,00,00


; User visible strings
; --------------------------------------------------------------
[Strings]
MGCS = "Panasonic Communications Co., Ltd."

Modem1 = "Class 2 Fax Modem"

[All]
HKR,,FriendlyDriver,,unimodem.vxd
HKR,,DevLoader,,*vcomm
HKR,,PortSubClass,1,02
HKR,,ConfigDialog,,modemui.dll
HKR,,EnumPropPages,,"modemui.dll,EnumPropPages"
HKR, Init,      1,, "AT<cr>"
HKR, Responses, "<cr><lf>OK<cr><lf>", 1, 00, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>ERROR<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00


; The [MfgAddReg] section contains the first modem's Init,
; Settings, and Responses keys.  It is installed for all
; modems in the INF.  This eliminates duplication of common
; registry keys in the model registry sections, above.
[MfgAddReg]
HKR,, InactivityFormat,, "seconds"
HKR, Init,      2,, "AT&F<cr>"
HKR, Monitor,   1,, "None"
HKR, Hangup,    1,, "ATH<cr>"
HKR, Answer,    1,, "ATA<cr>"
HKR,, Reset,, "ATZ<cr>"
HKR, Settings, Prefix,, "AT"
HKR, Settings, Terminator,, "<cr>"
HKR, Settings, DialPrefix,, "D"
HKR, Settings, DialSuffix,, ";"
HKR, Settings, SpeakerVolume_Low,, "L0"
HKR, Settings, SpeakerVolume_Med,, "L2"
HKR, Settings, SpeakerVolume_High,, "L3"
HKR, Settings, SpeakerMode_Off,, "M0"
HKR, Settings, SpeakerMode_Dial,, "M1"
HKR, Settings, SpeakerMode_On,, "M2"
HKR, Settings, SpeakerMode_Setup,, "M3"

HKR, Settings, FlowControl_Off,, "&K0"
HKR, Settings, FlowControl_Hard,, "&K3"

HKR, Settings, Pulse,, "P"
HKR, Settings, Tone,, "T"
HKR, Settings, Blind_Off,, "X4"
HKR, Settings, Blind_On,, "X3"
HKR, Settings, CallSetupFailTimer,, "S7=<#>"
HKR, Settings, InactivityTimeout,, "S19=<#>"
HKR, Fax, Class1DTESpeed,, "AUTO"
HKR, Responses, "0<cr>", 1, 00, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "1<cr>", 1, 02, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "2<cr>", 1, 08, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "3<cr>", 1, 04, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "4<cr>", 1, 03, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "5<cr>", 1, 02, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "6<cr>", 1, 05, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "7<cr>", 1, 06, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "8<cr>", 1, 07, 00, 00,00,00,00, 00,00,00,00

HKR,Responses,"<cr><lf>BUSY<cr><lf>",1,06,00,00,00,00,00,00,00,00,00
HKR,Responses,"<cr><lf>ERROR<cr><lf>",1,03,00,00,00,00,00,00,00,00,00
HKR,Responses,"<cr><lf>NO ANSWER<cr><lf>",1,07,00,00,00,00,00,00,00,00,00
HKR,Responses,"<cr><lf>NO CARRIER<cr><lf>",1,04,00,00,00,00,00,00,00,00,00
HKR,Responses,"<cr><lf>NO DIAL TONE<cr><lf>",1,05,00,00,00,00,00,00,00,00,00
HKR,Responses,"<cr><lf>OK<cr><lf>",1,00,00,00,00,00,00,00,00,00,00
HKR,Responses,"<cr><lf>RING<cr><lf>",1,08,00,00,00,00,00,00,00,00,00
HKR,Responses,"<cr><lf>RINGING<cr><lf>",1,01,00,00,00,00,00,00,00,00,00
HKR,Responses,"<cr><lf>VOICE<cr><lf>",1,01,00,00,00,00,00,00,00,00,00
HKR,Responses,"<cr><lf>CONNECT<cr><lf>",1,02,00,00,00,00,00,00,00,00,00
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 1.30