TOSHIBA e-STUDIO Series Copyright(c) 2003-2010 TOSHIBA TEC CORPORATION All Rights Reserved. June 8, 2010 This product has the following restrictions and issues. Please be sure to read this before using. -------------------------------------------------------------------------------- TopAccess -------------------------------------------------------------------------------- Issues ====== 1. IP Address Setting - Input for IP Address is 3 digits when MFP cannot be found by IP Address designation. E.g. 192.254.10.5 -> 192.254.010.005 2. When the [Cancel] button is pressed on the SMTP Authentication setting screen, the screen until the [Cancel] button is pressed becomes valid. -------------------------------------------------------------------------------- Web Services for Scan -------------------------------------------------------------------------------- Issues ====== 1. Although a scan application is used to set a paper size, an image is scanned at a size of an original placed on the glass or the ADF. 2. Although a scan application is used to set "Contrast" and "Brightness," a scanned image is not affected. 3. Scanning with resolution lower than the default of the scan profile which was set by the client computer may not be performed. In that case, set the default resolution of the scan profile to resolution appropriate for scanning. -------------------------------------------------------------------------------- Network -------------------------------------------------------------------------------- Issues ====== 1. To perform authentication with the Kerberos server, adjust the time of the MFP to match that of the server. If you have an SNTP server, you can automatically set a time with the SNTP setting enabled. 2. When the following occurs after changing network setting, turn off the MFP and then on. (1) When the "NETWORK INITIALIZING" display remains on the panel. (2) Network settings are not properly reflected. (3) Network settings cannot be changed. 3. When 802.1X EAP-TLS authentication is used, the CN(Common Name) specified in the user certificate should be one of the usernames in Active Directory. The MFP uses this CN as the User ID during EAP communication. Unless the same name is used, EAP-TLS authentication fails.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.