TOSHIBA e-STUDIO Series Copyright(c) 2008,2009 TOSHIBA TEC CORPORATION All Rights Reserved. November 20, 2009 This product has the following restrictions and issues. Please be sure to read this before using. -------------------------------------------------------------------------------- Installation -------------------------------------------------------------------------------- Issues ====== 1. When a WIA driver is already installed, uninstall it manually and then install it again. To uninstall the WIA driver manually, follow the procedure below: (1) Open [Scanners and Cameras] in [Control Panel]. (2) Right-click the WIA driver you want to uninstall. (3) Select [Delete]. (4) Restart the PC. (5) Delete the C:\Windows\system32\ewscan folder. (Note that the folder path may vary depending on the drive where the OS is installed.) 2. New drivers and applications, which are installed from this CD-ROM, may not function properly if those of old TOSHIBA products are already installed on a PC and are removed after the installation of new ones. In such a case, uninstall the new drivers and applications, then install them again using the CD-ROM. 3. Do not use the Repair setup on the PC to repair the client software, where Windows XP SP2 is not supported. Instead, uninstall the client software, and then reinstall it using the installer. -------------------------------------------------------------------------------- e-STUDIO WIA Driver Version 1.0.3.10 -------------------------------------------------------------------------------- To use e-STUDIO WIA Driver, perform the settings according to the procedure below. (1) Open [Scanners and Cameras] in [Control Panel]. (2) Right-click the WIA driver you want to connect to the MFP. (3) Select [Properties]. (4) Select [Device Setting] tab and click the [Discover] button. (5) The local search function is available. Make a local search. This software supports the following models: - e-STUDIO6530C Series - e-STUDIO4520C Series - e-STUDIO455 Series - e-STUDIO855 Series This software supports the following OS: - Windows XP (x86) - Windows Server 2003 (x86) Issues ======== 1. Notes on Using the WIA Driver (1) Touch Panel during WIA Connection - During WIA scan, the operation panel only displays special screens for RemoteScan. - By pressing the [CANCEL] button on the operation panel, a WIA connection session can be forcibly terminated. * Buttons other than [CANCEL] are disabled. * Canceling from the client application or a TopAccess scan job is possible. * WIA scan connection continues until image transfer to the client PC is finished. Therefore, it may take several minutes before other operations become available after the scan is completed. (2) Restrictions on the WIA Driver - No notification report is transmitted whether WIA scan is completed normally or abnormally. - When power failure occurs during WIA scan, the job will be lost. Start all over again. (3) When using Microsoft Office XP, SP2 or higher is required. (4) When using Windows Server 2003, set the startup type for the Windows Image Acquisition (WIA) service to [Automatic] using the management tool beforehand. 1. Right-click [My Computer]. 2. Select [Manage]. 3. Click [Services and Applications]. 4. Click [Services]. 5. Double-click [Windows Image Acquisition (WIA)]. 6. On the [General] tab, select [Automatic] in the [Startup Type] box. 7. Click [Apply] and [OK]. (5) Only one driver can be installed. Installation of several drivers is not supported. (6) When you use Photoshop to scan a document, an error message may appear when scanning is completed. However, it has no effect on scanning. (7) When you use an imaging application to scan a document, configure the following settings before scanning: When the settings have not been configured, scanned images become black. 1. Select [Tools] – [Options] – [Scan] from the imaging application menu bar. 2. Click the [Advanced] button. 3. Check [Native]. (8) When you use Microsoft Scanner and Camera Wizard to scan a document, the resolution defined in the properties description for a saved file may be incorrect. In such a case, use File Downloader or the TWAIN driver to save the document in a file. (9) When you use Photoshop or other TWAIN-compliant imaging applications to scan a document, the ADF is not supported. To use the ADF, use Microsoft Scanner and Camera Wizard or the TWAIN driver to scan a document. (10) When you click the [Cancel] button to cancel scanning of a document using Photoshop or other TWAIN-compliant imaging applications, restart the application to scan the document. Troubleshooting ====================== 1. Cannot find the MFP. [Problem Description] Even the Local Discovery function cannot find the MFP. [Corrective Action] Please check the following: - The MFP and PC are connected to the network via TCP/IP. - The gateway setting is correct in the case that the device is in the different subnet area. 2. Cannot connect the MFP which was found by the Local Discovery function. [Problem Description] The MFP was found by the Local Discovery function but cannot be connected after being selected. [Corrective Action] (1) Check that the Microsoft Internet Explorer 5.5 SP2 or later is installed. (2) Check that the proxy setting of the Microsoft Internet Explorer is correct so that the MFP can be connected. (3) Check that the Microsoft Internet Explorer is online. If it is offline, set it to online. -------------------------------------------------------------------------------- Trademarks -------------------------------------------------------------------------------- - The official name of Windows XP is Microsoft Windows XP Operating System. - The official name of Windows Server 2003 is Microsoft Windows Server 2003 Operating System. - Microsoft, Windows and the brand names and product names of other Microsoft products are trademarks of Microsoft Corporation in the US and other countries. - Other company names and product names in this manual are the trademarks of their respective companies.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.