================================================================= TOSHIBA DRIVER README FILE ================================================================= Thank you for purchasing our product. This document gives you the details of important matters which have to be checked before you install the printer driver. Be sure to read this document thoroughly before continuing with the installation. ----------------------------------------------------------------- Compatible Models ----------------------------------------------------------------- This README file is for following models. *Printer Driver TOSHIBA e-STUDIO 202S/203S/203SD *Scanner Driver TOSHIBA e-STUDIO 202S/203S/203SD ----------------------------------------------------------------- Compatible OS ----------------------------------------------------------------- *Printer Driver Microsoft Windows 98 Microsoft Windows Me Microsoft Windows 2000 Microsoft Windows XP Microsoft Windows Vista - If you upgrade the printer driver, be sure to install the new version of the printer driver after deleting the older version. Otherwise, the new version of driver may prevent the older version of printer driver from working. - If it is possible, try to use the latest versions of software applications, which are compatible with the operating system. A document created on an old version of a software application may not print correctly if printed from a newer version of the software. In this case, try saving the document using the new version, and then print it. *Scanner Driver Microsoft Windows 98 Microsoft Windows Me Microsoft Windows 2000 Microsoft Windows XP Microsoft Windows Vista Scanning through the USB2.0 port is supported on any Operating system, but the network port is not supported. ================================================================= Printer Driver Release Notes ================================================================= ----------------------------------------------------------------- Tips ----------------------------------------------------------------- - If it is possible, try to use the latest versions of software applications, which are compatible with the operating system. - A document created on an old version of a software application may not print correctly if printed from a newer version of the software. In this case, try saving the document using the new version, and then print it. - When "N-Up printing" is set to "2-Up" or "4-Up", or when the "Resolution Settings" is changed, the position of line breaks may change. In this event, adjust the character size and/or margins, and use the "Print preview" or "Show page layout" function in the software application to check the print layout before printing. - The displayed "number of pages" in the print queue may not be automatically updated. You can press the F5 key to update the displayed number. - Brightly colored characters or lines (yellow, light blue, etc.) may not appear when printed. In this event, try the following: (A) Text consisting only of characters/lines created with CAD software: Try selecting the "2 Gradation Print" checkbox in the "Advanced" tab before printing. (In this case, sections where photographs, colored characters and lines overlap will all be printed in black.) (B) Text that includes photographs, colored characters and lines: Try decreasing the "Brightness" setting in the "Image adjustment" dialog box that appears when you select the "Image adjustment" button in the "Advanced" tab. (This will change the brightness of the overall printed image.) (C) Other cases If you tried the above and still did not obtain the desired printing result, change the color of the character or line, or make it thicker using the application's control for font or line - In the test page that is printed when you select "Print test page" in the printer driver properties, "Yes" appears by "Color printing"; however, this has been set only to improve the reproducibility of halftone printing. The unit is only capable of black and white printing. - When the "Fit To Paper Size" function in the "Paper" tab is used, enlargement or reduction is calculated based on the "Paper size" in the "Paper" tab, not on the paper size in the application. Therefore, when using this function, make sure that the "Paper size" in the "Paper" tab is the same as the paper size in the application. - The position, size, and color of a watermark shown in the watermark preview (on the left side of the "Watermark" tab) in the driver properties may differ from the actual printed result. Use the preview only as a general guideline. - If N-Up printing is selected in the "Main" tab when a watermark has been selected, an image will appear (the paper image in the upper left-hand corner of the "Main", "Paper" and "Advanced" tabs) indicating that one watermark will be printed on the paper. The image simply indicates that a watermark has been selected; it does not indicate the printing result. A watermark will actually be printed on each page of the document. For example, when a multi-page document is printed using 2-Up printing, two watermarks will be printed on each sheet of paper. - If the printer driver language in use is different from the OS language, "Watermark" is not sometimes printed correctly. ------------------------------------------------------------------ Limitations in specific software applications ------------------------------------------------------------------ - When editing multiple documents in Microsoft Word 2000 or later, opening the driver properties and changing the print settings for one document may result in changes in the print settings for the other documents. In this case, reset the print settings before printing each document. - If a document is printed using a large font in Microsoft Word and other applications, the application may be shut down by Windows. Fonts larger than 300 points can be set in Microsoft Word; however, do not use a font larger than approximately 300 points for printing. When using a large font in a document, we recommend that you frequently save the document so edits are not lost. - Some English fonts may not print correctly from WordPad. In this case, use a different word processor application (Microsoft Word, etc.) - In WordPad, printing may not take place correctly if you specify a page range starting from the second page. In this event, select "All" for the pages to be printed. - When using Acrobat Reader 5.0 or later, a landscape-oriented document may be printed in the opposite orientation of other applications. In this event, deselect the "Auto-rotate and center pages" checkbox in the Print dialog box before printing. - Graphics in a Power Point document may print in black, try the following: (1) Select "Print" from the "File" menu in Power Point. (2) Set off in the Grayscale function in the Print dialog box. (3) Click the "OK" button. ===> Printing begins. - Shading and Fills may not appear correctly when printing from Excel. In this case, select "Photo" for "Print quality" in the "Advanced" tab of the driver properties. - Some graphical contents may not print correctly from Internet Explorer. In this case, select "Photo" for "Print quality" in the "Advanced" tab of the driver properties. - Brightly colored characters or lines (yellow, light blue, light gray etc.) may not appear when printed from Power Point. In this case, select "Photo" for "Print quality" in the "Advanced" tab of the driver properties. - When you use the Internet Explorer with "Protected Mode", some functions may not be used correctly. This probrem may be solved by modifying the "Enable Protected Mode" of the "Security" tab to be "OFF" after selecting the "Tool"-"Internet Options" menu in Internet Explorer. ================================================================== Scanner Driver Release Notes ================================================================== ------------------------------------------------------------------ About the operating environment ------------------------------------------------------------------ - Monitor A monitor with video 800 x 600 SVGA 256 colors or higher is required. ------------------------------------------------------------------ Important points when using the scanner ------------------------------------------------------------------ - The Selector starts when two and more device is connected to the PC and the TWAIN driver is started from the PC. Please choose an appropriate device, and use. But, when two and more device is connected to the PC, the reading which the scanning button of the machine was used for may not be able to be done. In this case, connect only one unit to the PC. - Some OCR programs require alternate program settings to work efficiently. Please check the Twain driver and/or OCR settings if problems persist. - When an image is scanned using "Image Area" for the scanning range, the properties of the scanned image may not show the image size. - During device warm up, scanning from the WIA driver may cause an error message. In the case, please try again after the "Power save indicator" of the device turns off. - The latest versions of software applications offer greater compatibility with scanning systems. - The preview image quality doesn't match the final scan image quality depending on the settings. - Some applications don't support high resolution scanning. In that case, please try reducing resolution. - When the progress bar shows "Processing...", the device cancellation button operation may be delayed. ----------------------------------------------------------------- This software is based in part on the work of the Independent JPEG Group. ------------------------------------------------------------------ TOSHIBA Corporation makes no guarantee regarding the suitability of the information presented in this document or the software for any purpose other than the use of this printer and scanner driver ------------------------------------------------------------------ Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and worldwide. Windows is an abbreviation for the Microsoft Windows operating system. All other company names and product names are trademarks or registered trademarks of the respective companies. ----------------------------------------------------------------- Copyright (C) 2007-2008 SHARP CorporationDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.