Information and Instructions about this download file. ======================= File Description: BIOS ECS-MCP61PM-AM Motherboard Version: 61G114GS Operating System: Microsoft(r) Windows Vista(r), Windows(r) XP Part Number: 9539176 Date: 11/16/2007 ======================= Table of Contents ======================= Overview Identification Installation Removal Troubleshooting Reason for Update Applicable Part Numbers ======================= Overview This document describes the steps necessary to upgrade to BIOS version 61GW114GS for the ECS-MCP61PM-AM motherboard. Identification This BIOS can be installed on a ECS-MCP61PM-AM motherboard. Installation The BIOS should be flashed if: 1. You are updating to a newer BIOS revision. 2. A technician has told you to flash or re-flash the computer. Steps to flash or re-flash the computer using a CD burner drive: 1. Use CDRW burning software to Burn Disc Image of the C:\Cabs\9539176\9539176.iso file to a blank CD. 2. After creating the bootable CD, place the CD in the CD/DVD drive, and then restart the computer. 3. At the Menu, select 1 for Gateway BIOS 61G114GS. The BIOS flash process runs automatically. Do not press any keys or turn off the computer during this process. 4. When complete the message "Flashing Complete" would be flashing, remove boot media used and hit <F1>. 5. Press the F2 key to enter the CMOS Setup Utility. 6. In the CMOS Setup Utility, select Load Optimized Defaults, and then press the ENTER key. 7. Press the Y key, and then press ENTER to select Load Optimized Defaults. 8. In the CMOS Setup Utility, select Save & Exit Setup, and then press ENTER. 9. Press Y, and then press ENTER to Save to CMOS and EXIT. Steps to flash or re-flash the computer using a floppy disk drive or bootable USB flash drive: 1. Copy all of the BIOS files except 9539176.iso from the C:\Cabs\9539176 folder to a blank floppy disk or a USB flash drive. 2. Restart the computer with the floppy disk inserted/USB flash drive plugged in. 3. At the Menu, select 1 for Gateway BIOS 61G114GS. The BIOS flash process runs automatically. Do not press any keys or turn off the computer during this process. 4. When the flash is complete, the computer automatically restarts. 5. Press the F2 key to enter the CMOS Setup Utility. 6. In the CMOS Setup Utility, select Load Optimized Defaults, and then press the ENTER key. 7. Press the Y key, and then press ENTER to select Load Optimized Defaults. 8. In the CMOS Setup Utility, select Save & Exit Setup, and then press ENTER. 9. Press Y, and then press ENTER to Save to CMOS and EXIT. Removal Because a computer must have a BIOS to operate, there is no removal process. The BIOS cannot be removed after it has been upgraded. Troubleshooting If you have trouble flashing the BIOS, try the process again following the steps listed in the Installation section of this document. If you are still unable to flash the BIOS, verify that you are actually attempting to flash the BIOS on an ECS uBTX motherboard. If this process still fails, contact technical support. There may be an error indicating a CMOS Checksum error. At the Gateway Splash screen, press the F2 key to enter the BIOS Setup Utility. Press the ENTER key to select Load Optimized Defaults and Save and Exit Setup. The computer restarts. Reason for Update: - Update AGESA 2.08.11 - Fixed G1 version CPU can't long run reboot test Applicable Part Numbers GM5470E - 1009592 GM5470E - 2900950 GM5472 - 1009566 GM5474 - 1009568 GM5639E - 1014851R GT3252m - 1015525R GT5212j - 1009607R GT5224j - 1014948R GT5477E - 1009589 GT5482E - 1009615 GT5637E - 1014914R GT5644E - 1014971R GT5648E - 1015074R GT5654 - 1015001R GT5656 - 1015002R GT5656 - 2906023R GT5657E - 1015011R J4486 - 1014946R ECS MCP61PM-AM Motherboard - 4006203RDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.