asf.txt Driver File Contents (Lan_Intel_11.2.19.0_W7x86W7x64_A.zip)

'******************************************************************************************
'*** Name: asf.vbs
'*** Purpose: To get or set ASF Configuration on a ASF Client.
'*** Usage: cscript.exe asf.vbs [/target:<systemname>] [/user:<username>] [/password:<password>]
'*** Usage:    [/enable:true|false] [/destinationip:<destinationip>] [/ping:true|false] 
'*** Usage:    [/pinginterval:<interval>] [/heartbeat:true|false] [/heartbeatinterval:<interval>] 
'*** Usage:    [/snmpcommunity:<snmpcommunity>] [/retrycount:<retrycount>] [/retryinterval:<retryinterval>]
'***
'*** The /target switch is used to identify the target machine of the script.  If /target is not 
'*** specified, the script is applied to the local computer.  If /target is specified, the script
'*** is  applied remotely to the target machine.
'*** The /user switch is used to specify a user account for the remote connection
'***
'*** The /password switch is used to specify the password for the user account specified by the
'*** /user switch.  Note:  The /password switch must be used with the /user switch.  You cannot specify
'*** a password without specifying a user.
'***
'*** The /enable:true switch turns ASF on.  The /enable:false turns ASF off.
'*** Note:  In order to successfully enable ASF, the destination IP and snmp community must be set.
'***
'*** The /destinationip:<destinationip> switch tells the ASF what IP address to send the PETs to.
'*** 
'*** The /ping:true switch enables the ASF to ping the destination IP at the interval specified in
'*** pinginterval.  The /ping:false disables the ASF from pinging the destination IP.
'***
'*** The /pinginterval:<pinginterval> switch sets the interval between pings of the destination IP.
'***
'*** The /heartbeat:true switch enables the ASF to send a heartbeat PET to the destination IP at 
'*** the interval specified in heartbeatinterval.  The /heartbeat:false disables the ASF from sending
'*** heartbeat PETs to the destination IP.
'***
'*** The /heartbeatinterval:<heartbeatinterval> switch sets the interval between sending PETs to
'*** the destination IP.
'***
'*** The /snmpcommunity:<snmpcommunity> switch sets the snmp community for the PETs.
'*** 
'*** The /retrycount:<retrycount> switch tells the ASF how many times to resend the PETs to the
'*** destination IP address. 
'***
'*** The /retryinterval:<retryinterval> switch sets the interval between resending the PETs to
'*** the destination IP.
'***
'***
'*** You can use any combination of the switches to set the configuration or you can use no
'*** switches to retrieve the current configuration.  The /target switch is always used to identify 
'*** the target machine to apply the script to.
'***
'***
'*** Examples of some typical uses of the script are below
'*** =====================================================================================
'*** Example 1  This retrieves the current ASF configuration from the local machine
'*** ----------
'*** cscript.exe asf.vbs
'***
'*** Example 2  This retrieves the current ASF configuration from a target machine named "frank"
'***            by using the /target:frank, /user:steven, and /password:foo switches
'*** ----------
'*** cscript.exe asf.vbs /target:frank /user:steven /password:foo
'***
'*** Example 3  This enables ASF on the local machine to send PETs, in the public community,
'***			to ip address 10.1.1.5 by using the /enable:true, the /destinationip:10.1.1.5,
'***            and the /snmpcommunity:public switches.
'*** ----------
'*** cscript.exe asf.vbs /enable:true /destinationip:10.1.1.5 /snmpcommunity:public
'***
'*** Example 4  This enables ASF on a target machine named "frank" to send PETs, in the public 
'***			community, to ip address 10.1.1.5 by using the /target:frank, /user:steven, 
'***			/password:foo, /enable:true, /destinationip:10.1.1.5, and /snmpcommunity:public switches.  
'*** ----------
'*** cscript.exe asf.vbs /target:frank /user:steven /password:foo /enable:true /destinationip:10.1.1.5 /snmpcommunity:public
'***
'*** ======================================================================================
'*** The sample script is provided as an example only, and has not been tested, nor is 
'*** warranted in any way by Dell; Dell disclaims any liability in connection therewith. 
'*** Dell provides no technical support with regard to such scripting. For more information 
'*** on WMI scripting, refer to applicable Microsoft documentation. 
'***
'*** 
'******************************************************************************************

 

Option Explicit

 

'*** Declare variables
Dim strNameSpace
Dim strClassName
Dim strKeyValue 
Dim objInstance
Dim ObjServices
Dim ObjLocator
Dim ObjWbemObjectSet

Dim strComputerName
Dim strUserName
Dim strPassword
Dim boolGet

Dim strPropEnableValue
Dim strPropDestinationIPValue
Dim strPropPingEnableValue
Dim strPropPingIntervalValue
Dim strPropHBEnableValue
Dim strPropHBIntervalValue
Dim strPropSNMPCommunityValue
Dim strPropRetryCountValue
Dim strPropRetryIntervalValue

 


'*** Check that the right executable was used to run the script 
'*** and that all parameters were passed
If (LCase(Right(WScript.FullName, 11)) = "wscript.exe" ) Then
 Call Usage()
 WScript.Quit
End If

'*** Initialize variables
strNameSpace = "root/cimv2"
strClassName = "IA_ASF_OOBAlertService"
strKeyValue = "Intel ASF OOB Alert Service"
strComputerName = "localhost"
boolGet = TRUE


 
Dim i

for i = 0 to WScript.Arguments.Count-1
	if Left(LCase(WScript.Arguments(i)), 8) = "/target:" then
		strComputerName = Mid(WScript.Arguments(i), 9)
	elseif Left(LCase(WScript.Arguments(i)), 6) = "/user:" then
		strUserName = Mid(WScript.Arguments(i), 7)
	elseif Left(LCase(WScript.Arguments(i)), 10) = "/password:" then
		if (strUserName <> "") then
			strPassword = Mid(WScript.Arguments(i), 11)
		else
			Call Usage()
			WScript.Quit
		end if
	elseif Left(LCase(WScript.Arguments(i)), 8) = "/enable:" then
		boolGet = FALSE
		if LCase(Mid(WScript.Arguments(i), 9)) = "true" then
			strPropEnableValue = 1
		elseif LCase(Mid(WScript.Arguments(i), 9)) = "false" then
			strPropEnableValue = 0
		else
			Call Usage()
			Wscript.Quit
		end if
	elseif Left(LCase(WScript.Arguments(i)), 15) = "/destinationip:" then
		boolGet = FALSE
		strPropDestinationIPValue = Mid(WScript.Arguments(i), 16)
	elseif Left(LCase(WScript.Arguments(i)), 6) = "/ping:" then
		boolGet = FALSE
		if LCase(Mid(WScript.Arguments(i), 7)) = "true" then
			strPropPingEnableValue = 1
		elseif LCase(Mid(WScript.Arguments(i), 7)) = "false" then
			strPropPingEnableValue = 0
		else
			Call Usage()
			Wscript.Quit
		end if
	elseif Left(LCase(WScript.Arguments(i)), 14) = "/pinginterval:" then
		boolGet = FALSE
		strPropPingIntervalValue = Mid(WScript.Arguments(i), 15)
	elseif Left(LCase(WScript.Arguments(i)), 11) = "/heartbeat:" then
		boolGet = FALSE
		if LCase(Mid(WScript.Arguments(i), 12)) = "true" then
			strPropHBEnableValue = 1
		elseif LCase(Mid(WScript.Arguments(i), 12)) = "false" then
			strPropHBEnableValue = 0
		else
			Call Usage()
			Wscript.Quit
		end if
	elseif Left(LCase(WScript.Arguments(i)), 19) = "/heartbeatinterval:" then
		boolGet = FALSE
		strPropHBIntervalValue = Mid(WScript.Arguments(i), 20)
	elseif Left(LCase(WScript.Arguments(i)), 15) = "/snmpcommunity:" then
		boolGet = FALSE
		strPropSnmpCommunityValue = Mid(WScript.Arguments(i), 16)
	elseif Left(LCase(WScript.Arguments(i)), 12) = "/retrycount:" then
		boolGet = FALSE
		strPropRetryCountValue = Mid(WScript.Arguments(i), 13)
	elseif Left(LCase(WScript.Arguments(i)), 15) = "/retryinterval:" then
		boolGet = FALSE
		strPropRetryIntervalValue= Mid(WScript.Arguments(i), 16)
	else
		Call Usage()
		Wscript.Quit
	end if

next


'*** Retrieve the instance of IA_ASF_OOBAlertService class (there should only be 1 instance).
Set ObjLocator = CreateObject("Wbemscripting.SWbemLocator")

Set ObjServices = ObjLocator.ConnectServer( strComputerName, strNameSpace, strUserName, strPassword)

If (IsObject(ObjServices) = FALSE) Then
	WScript.Echo Err.Description
	WScript.Quit
End If

ObjServices.Security_.ImpersonationLevel = 3  'impersonate
ObjServices.Security_.AuthenticationLevel = 4 'packet
			 
Set ObjWbemObjectSet = ObjServices.InstancesOf(strClassName)
Set ObjInstance = objWbemObjectSet.Item(strClassName & ".Name=" & Chr(34) & strKeyValue & Chr(34))

If (IsObject(ObjInstance) = FALSE) Then
	WScript.Echo Err.Description
	WScript.Quit
End If

if (boolGet = TRUE) then
	Call GetASF()
	WScript.Quit
end if


if strPropEnableValue <> "" then
	objInstance.Enable = strPropEnableValue
	WScript.Echo "setting ASF Enable to " & strPropEnableValue
end if
 
if strPropDestinationIPValue <> "" then
	objInstance.DestinationAddress = strPropDestinationIPValue
	WScript.Echo "setting Destination IP to " & strPropDestinationIPValue
end if
if strPropPingEnableValue <> "" then
	objInstance.PingAlertDestination = strPropPingEnableValue
	WScript.Echo "setting Ping Enable to " & strPropPingEnableValue
end if
if strPropPingIntervalValue <> "" then
	objInstance.AlertDestinationPingInterval = strPropPingIntervalValue
	WScript.Echo "setting Ping Interval to " & strPropPingIntervalValue
end if
if strPropHBEnableValue <> "" then
	objInstance.EnablePresenceHeartbeats = strPropHBEnableValue
	WScript.Echo "setting Heartbeat enable to " & strPropHBEnableValue
end if
if strPropHBIntervalValue <> "" then
	objInstance.PresenceHeartbeatInterval = strPropHBIntervalValue
	WScript.Echo "setting Heartbeat interval to " & strPropHBIntervalValue
end if
if strPropSNMPCommunityValue <> "" then
	objInstance.SNMP_Community = strPropSNMPCommunityValue
	WScript.Echo "setting SNMP Community to " & strPropSNMPCommunityValue
end if
if strPropRetryCountValue <> "" then
	objInstance.RetryCount = strPropRetryCountValue
	WScript.Echo "setting Retry Count to " & strPropRetryCountValue
end if
if strPropRetryIntervalValue <> "" then
	objInstance.RetryInterval = strPropRetryIntervalValue
	WScript.Echo "setting Retry Interval to " & strPropRetryIntervalValue
end if



objInstance.Put_
'*** If any errors occurred, let the user know
If Err.Number <> 0 Then
 WScript.Echo "Setting ASF Enable/Disable failed."
End If

Call GetASF()

Sub GetASF()

WScript.Echo VBCRLF & VBCRLF
 
If objInstance.Enable = true Then

	if objInstance.SafeMode = true then
		WScript.Echo "ASF Agent is in SAFE MODE! " & objInstance.ReasonForSafeMode
	else
		WScript.Echo "ASF Alerting Enabled:         " & objInstance.Enable
		WScript.Echo "ASF Trap Destination Address: " & objInstance.DestinationAddress
		WScript.Echo "ASF SNMP Community:           " & objInstance.SNMP_Community
		WScript.Echo "ASF Heartbeat Enabled:        " & objInstance.EnablePresenceHeartbeats 
		WScript.Echo "ASF Heartbeat Interval:       " & objInstance.PresenceHeartbeatInterval
		WScript.Echo "ASF Ping Destination Enable:  " & objInstance.PingAlertDestination 
		WScript.Echo "ASF Ping Interval:            " & objInstance.AlertDestinationPingInterval 
		WScript.Echo "ASF Retry Count:              " & objInstance.RetryCount 
		WScript.Echo "ASF Retry Interval:           " & objInstance.RetryInterval 
	End if
Else
	WScript.Echo "ASF Alerting Disabled"
End If

'*** If any errors occurred, let the user know
If Err.Number <> 0 Then
 WScript.Echo "Setting ASF Enable/Disable failed."
End If
End Sub
  

'*** Sub used to display the correct usage of the script
Sub Usage()
Dim strMessage
strMessage = "incorrect syntax. You should run: " & vbCRLF & _
 "cscript.exe Asf.vbs [/target:<systemname>]" & VBCRLF & _
 "                             [/user:<username> [/password:<password>]]" & VBCRLF & _
 "                             [/enable:true|false]" & VBCRLF & _
 "                             [/destinationip:<destinationip>]" & VBCRLF & _
 "                             [/ping:true|false]" & VBCRLF & _
 "                             [/pinginterval:<interval>]" & VBCRLF & _
 "                             [/heartbeat:true|false]" & VBCRLF & _
 "                             [/heartbeatinterval:<interval>]" & VBCRLF & _
 "                             [/snmpcommunity:<snmpcommunity>]" & VBCRLF & _
 "                             [/retrycount:<retrycount>]" & VBCRLF & _
 "                             [/retryinterval:<retryinterval>]"


WScript.Echo strMessage
End Sub

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web3, load: 1.71