DisplayLink-5.3.25010-release_note.txt Driver File Contents (34_UVA-160H.zip)


=============================================================================
=============================================================================
DisplayLink Software Release: External Release Note
Software Package: DisplayLink Graphics
Product Version: 5.3.25010.0
Product Date: 20th May 2010
DisplayLink Core Software Version: 5.3.24903.0
DisplayLink Core Software Date: 12th May 2010
=============================================================================
=============================================================================

A. Introduction
===============
This is R5.3M2, the second Maintenance Release of R5.3.

DisplayLink Software Release 5.3 delivers the following features:
- Improved Windows 7 DirectX 10 support on Intel GPUs
- Minimal Impact Installation
- Improved support for notebook lid close use case
- Substantial bug fixes and improved stability
- HDMI Support
- Improved support for switchable platforms
- Improved uninstallation

For further support and information about DisplayLink software, please visit
http://www.displaylink.com/support


B. Contents
===========
A. Introduction
B. Contents
C. New features
C1. Changes since the R5.3 Product Release (5.3.24179)
D. How to Install and Use
E. Supported Operating Systems
F. PC Recommended Specifications
G. Language Support
H. Supported Hardware
I. Known Issues and Limitations


C. New features
===============
DisplayLink Software Release 5.3 delivers the following features:
- Improved Windows 7 DirectX 10 support on Intel GPUs
- Minimal Impact Installation
- Improved support for notebook lid close use case
- Substantial bug fixes and improved stability
- HDMI Support
- Improved support for switchable platforms
- Improved uninstallation

Improved Windows 7 DirectX 10 support on Intel GPUs
---------------------------------------------------
Direct X 10 mode can now be run on systems with Intel GPUs (Graphics Processing
Unit) for increased compatibility and performance.

Minimal Impact Installation
---------------------------
DisplayLink Software installation will no longer affects the Windows Experience
Index (WEI) when initially installed on a Windows 7/Vista system. A full driver
installation now only occurs once a DisplayLink device is first connected.

Improved support for notebook lid close use case
------------------------------------------------
DisplayLink Software now recognises and correctly handles layout changes
following a notebook lid closure, even if the notebook has been configured to
"do nothing" when the notebook lid is closed.

Substantial bug fixes and improved stability
--------------------------------------------
This software release builds on R5.2 to offer increased quality across the
complete set of functionality on all OSes, including:
- Support for multiple displays with the same EDID
- Device connection and disconnection 
- Uninstallation and upgrade
- Desktop layout management
- Power management transitions
- Driver compatibility
- Error handling

HDMI Support
------------
Software includes changes to allow all DisplayLink devices with HDMI
connections to gain HDMI certification.

Improved support for switchable platforms
-----------------------------------------
This software release improves compatibility with multiple GPU configurations
including some ATI/ATI, ATI/Intel and NVIDIA/Intel switchable systems.

Improved uninstallation
-----------------------
It is now possible to directly uninstall the DisplayLink Core software using
Windows's Add/Remove Programs utility, even if other DisplayLink software
packages are installed on the system. The uninstaller will confirm that you
wish to remove all DisplayLink software, and then proceed to remove all
installed packages off the system.


C1. Changes since the R5.3 Product Release (5.3.24179)
------------------------------------------------------

Changes in R5.3M1 (5.3.24474)
-----------------------------
Fixed an issue that prevents the DisplayLink Software installation to complete
successfully with user names that contain Unicode characters (8250)


Changes in R5.3M2 (5.3.24903)
-----------------------------
Fixed an issue that prevented installation on Windows 2000 systems (8385)

Fixed an issue affecting auto-install of DisplayLink graphics and Ethernet
drivers from SPI flash on some designs, that prevented auto-install operations
from completing correctly. (7792)

Fixed a blue screen on some NVIDIA Optimus configurations triggered by the
first connection of a DisplayLink device. (8252, 8272)

Fixed a blue screen on some NVIDIA Optimus configurations triggered by
restarting the Windows graphics subsystem when DisplayLink devices are
attached. (8300)

Fixed a misspelling in the Traditional Chinese version of the End User Legal
Agreement shown when installing the DisplayLink Software. (8352)

Fixed an issue causing DisplayLink screens to fail to wake from power save mode
when re-opening the laptop lid. (8413)


D. How to Install and use
=========================
Please find detailed guidance and information about how to install and use this
software in the DisplayLink Software User Guide: http://kb.displaylink.com/298

Corporations can apply for a corporate install version at 
www.displaylink.com/corporateinstall

For further support and information about DisplayLink software, please visit 
http://www.displaylink.com/support


E. Supported Operating Systems
==============================
This release supports the following operating systems (server editions are not
supported unless explicitly stated):

    - Windows 2000 SP4
    
    - Windows XP SP2 (32-bit edition only)
    - Windows XP SP3 (32-bit edition only)
    
    - Windows Vista SP1 (32-bit and 64-bit editions)
    - Windows Vista SP2 (32-bit and 64-bit editions)
    
    - Windows 7 (32-bit and 64-bit editions)
    
Video: video is supported in extend mode with most popular video players on
Windows XP and Windows 7/Vista in WDDM/Aero Mode. Video support is limited in
other configurations including mirror mode and Windows 7/Vista Basic Mode.


F. PC Recommended Specifications
================================
Please find detailed information about the minimum and recommended system
specifications needed to run this software in the DisplayLink
Software User Guide: http://kb.displaylink.com/298


G. Language Support
===================
Please find the complete list of languages supported by this software in the
DisplayLink Software User Guide: http://kb.displaylink.com/298


H. Supported Hardware
=====================
- DL115 / DL125 / DL165 / DL195 devices are supported.
- DL120 / DL160 devices are supported.
- Earlier devices are supported for backwards compatibility.


I. Known Issues and Limitations
===============================
System behaviour with DisplayLink attached screens has been well tested.
Testing covers plug/unplug, mode changes, playing video, hibernate,
sleep/standby, multiple users, different user rights, attached screen as
primary screen, attached screen as only screen, and other aspects.

Some use cases my exhibit minor issues, general troubleshooting recommendations
are:
- detach then reattach the DisplayLink device's USB cable
- change display settings using DL-GUI (Vista only)  
- change display settings using WDP.
- ensure you have the latest graphics
  drivers installed for your system GPU.

For information about specific issues please see the DisplayLink support
knowledgebase: http://www.displaylink.com/support/knowledgebase.php

      
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 0.42