==============================================================
Linksys EG1032/EG1064 Instant Gigabit Network Adapter
Driver Installation For Windows ME
==============================================================
Copyright (C) 2002 Linksys Group Inc.
All rights reserved.
Content:
--------
Installing the Linksys EG1032/EG1064 Instant Gigabit Network Adapter Driver
on Windows ME:
1. Power off your PC and install the network card.
2. Turn power on then boot from Windows ME.
3. Window system will prompt Fast Ethernet PCI Controller in
New Hardware Found dialog box.
4. Select "Driver from disk provided by hardware manufacturer"
from New Hardware Found dialog box, then click OK button.
5. Insert the EG1032/EG1064 Driver Diskette in your floppy drive.
6. Enter the driver pathname, i.e. A:\WinME , then
click "OK" button from Install from Disk dialog box.
7. When the system has selected your installed adapter,
the screen will show the following adapter name.
"Linksys EG1032/EG1064 Instant Gigabit Network Adapter"
8. Follow screen instructions to complete the process.
9. Restart your computer.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.