****************************************************************************
* *
* The Ethernet Adapter *
* *
* ODI Driver for NetWare 3.11 Servers *
* *
* Ver. 2.00 *
* *
* README file *
* *
****************************************************************************
1. Introduction
This Ethernet ODI driver for NetWare 3.11 Server conforms to Novell Net-
Ware 386 Public Domain Open Data-Link Interface (ODI), a specification
that is jointly designed by Novell and Apple. It applies to NetWare 3.11
servers.
2. Contents of the Subdirectory
RETH.LAN NetWare 3.11 ODI Server Driver for the Ethernet Card.
3. Installation
1) Install and configure the Ethernet card on your ISA PC system, fol-
lowing the procedure in your jumperless Ethernet installation manual.
2) Install NetWare 3.11 Server according to the manual.
3) Insert the Distribution Diskette into drive A: (or drive B. If drive
B is your option, replace A: with B: in the following procedure).
4) At the DOS prompt, type the following commands:
CD \NETWARE
SERVER
5) On the server console, load RETH.LAN. You may specify the frame type
and the slot number. For example:
LOAD A:\NETWARE\ODI\SVRODI\ODIV2\RETH.LAN FRAME=Ethernet_802.3
6) Bind IPX to RETH by typing the following command:
BIND IPX RETH
7) If you want to load RETH.LAN from the hard disk directly in the future,
setup a workstation to connect to this server, then copy RETH.LAN from
the Distribution Diskette to the subdirectory SYS:\SYSTEM on the server.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.