README Driver File Contents (lanstar_drivers_all.zip)

****************************************************************************
*                                                                          *
*                         The Ethernet Adapter                             *
*                                                                          *
*                    IPX Driver for DOS Workstations                       *
*                                                                          *
*                               Ver. 1.03                                  *
*                                                                          *
*                              README file                                 *
*                                                                          *
****************************************************************************

1. Introduction

   These Ethernet IPX drivers for DOS wokstations conform to Novell NetWare
   Internetwork Packet Exchange Protocol (IPX).  They apply to the NetWare
   DOS workstations.

   This version will work with Advanced and SFT NetWare v2.15 Rev. C or
   later and ELS Level II v2.15 or later.


2. Contents of the Subdirectory

      RE2K.OBJ      An object file used to create the Shell drivers.

      RE2K.LAN      A description file used by WSGEN to create the NetWare
                    drivers.


3. Installation

   1) Install and configure the Ethernet card on your ISA PC system, fol-
      lowing the procedure in your jumperless Ethernet installation manual.

   2) Get a diskette labled LAN_DRV_518. If it does not exist, format one
      and use the DOS LABEL command to lable it as LAN_DRV_518. Copy
      "RE2K.OBJ" and "RE2K.LAN" to the root directory of the LAN_DRV_518
      diskette.

   3) Run WSGEN(NW 2.2) to link the RE2K driver.

   4) Press INS key to insert the new driver during performing 'Select Net-
      work Driver'.  Then insert the diskette labeled LAN_DRV_518 to load
      the RE2K driver.

   5) Follow the menu instructions to complete the installation.


Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 1.23