# Intel EPC Sunnymead Colden
[ActionItems]
[Models]
HDAUDIO\FUNC_01&VEN_8384&DEV_7683&SUBSYS_8086071A=this
Default=this
[DelRegKeys]
HKR\Settings=yes
HKLM\Software\SigmaTel\StacGUI=yes
HKCU\Software\SigmaTel\Settings=yes
HKLM\Software\Sigmatel\STSysTray=yes
HKLM\SOFTWARE\SigmaTel\GlobalState=yes
HKCU\Software\Microsoft\Windows\CurrentVersion\Applets\Volume Control\SigmaTel Audio=yes
HKCU\Software\Microsoft\Windows\CurrentVersion\Applets\Volume Control\SigmaTel Audio2=yes
HKCU\Software\Microsoft\Multimedia\Sound Mapper=Yes
[APPS]
sonicfocussetup=yesinvisible
;;StartSTSysTray=YesInvisible ;removed to make optional
[CopyFiles]
sttray.exe = 0x24
stacgui.cpl = 0x25
stlang.dll = 0x25
stacsv.exe = 0x25
[RegisterDlls]
stacapi.dll
[LaunchPrograms]
STacSV -r
[HKLM\Software\Microsoft\Windows\CurrentVersion\Run]
SigmatelSysTrayApp="sttray.exe"
[HKLM\SOFTWARE\SigmaTel\GlobalState\STSysTray\1.0]
ShowEventDialog = dword: 1
[HKLM\Software\Sigmatel\STSysTray\1.0]
HideTrayIcon = dword: 1
PollingPeriod = dword: 500
RecordPriority = dword: 0
ControlPanel = "stacgui.cpl"
Automatic = dword: 1
[HKR]
CodecName = "STAC9220"
[HKR\Settings]
InitVerbs = hex:
TraceFlags = dword: 0x89B3
CPL_SaveExtraPower = hex: 0
CPL_MaySwitchExtAmpPowerState = hex: 0
CPL_UserControlsMaySwitchExtAmpPowerState = hex: 0
CPL_SecondsAfter = dword: 5
CPL_SpdifTransmitterEnabledByUser = hex: 1
CPL_UserControlsFixedDigitalOutRate = hex: 1
CPL_FixedDigitalOutRate = dword: 48000
MicBoostLevel = dword: 0x000A0000
Mic2BoostLevel = dword: 0x000A0000
VolumeKnobUpdateRate = hex: 3 ;range 0-7 (2.5Hz to 20Hz) (default=0)
[HKR\Settings\pin]
[HKR\Settings\Pin\0A]
CfgDflt = dword: 0x0221401F #0A# <STAC9220> (Port A:Pins39/41) Jack:1/8" Stereo/Mono, HP Out, Green, A:1, S:F, Loc:Primary Chassis Ext., Front, Det:No, Imp:No
[HKR\Settings\Pin\0B]
CfgDflt = dword: 0x01041111 #0B# <STAC9220> (Port B:Pins21/22) Jack:RCA, Line Out, Black, A:1, S:1, Loc:Primary Chassis Ext., Rear, Det:Yes, Imp:No
[HKR\Settings\Pin\0C]
CfgDflt = dword: 0x00000014 #0C# <STAC9220> (Port C:Pins23/24) Jack:Unknown Type, Line Out, Unknown, A:1, S:4, Loc:Primary Chassis Ext., N/A, Det:No, Imp:No
[HKR\Settings\Pin\0D]
CfgDflt = dword: 0x00000010 #0D# <STAC9220> (Port D:Pins35/36) Jack:Unknown Type, Line Out, Unknown, A:1, S:0, Loc:Primary Chassis Ext., N/A, Det:No, Imp:No
[HKR\Settings\Pin\0E]
CfgDflt = dword: 0x02A2902E #0E# <STAC9220> (Port E:Pins14/15) Jack:1/4" Stereo/Mono, Mic In, Pink, A:2, S:E, Loc:Primary Chassis Ext., Front, Det:No, Imp:No
Action = hex: 09,0E
[HKR\Settings\Pin\0F]
CfgDflt = dword: 0x01041112 #0F# <STAC9220> (Port F:Pins16/17) Jack:RCA, Line Out, Black, A:1, S:2, Loc:Primary Chassis Ext., Rear, Det:Yes, Imp:No
[HKR\Settings\Pin\10]
CfgDflt = dword: 0x01451030 #10# <STAC9220> (SPDIF Out:Pin48) Jack:Optical, SPDIF Out, Black, A:3, S:0, Loc:Primary Chassis Ext., Rear, Det:No, Imp:No
[HKR\Settings\Pin\11]
CfgDflt = dword: 0x400000FB #11# <STAC9220> (SPDIF In:Pin47) No Connection:Unknown Type, Line Out, Unknown, A:F, S:B, Loc:Primary Chassis Ext., N/A, Det:No, Imp:No
[HKR\Settings\Pin\15]
CfgDflt = dword: 0x503300F0 #15# <STAC9220> (CD In:Pins18/19/20) No Connection:ATAPI Internal, CD In, Unknown, A:F, S:0, Loc:Internal, N/A, Det:No, Imp:No
[HKR\Settings\Pin\1B]
CfgDflt = dword: 0x400000FE #1B# <STAC9220> (I2S Out:Pin44) No Connection:Unknown Type, Line Out, Unknown, A:F, S:E, Loc:Primary Chassis Ext., N/A, Det:No, Imp:No
[HKR\Settings\GPIO]
[HKR\Settings\Connselector]
[HKR\Settings\filter\Rear]
UniqueID = hex: 0
LegacyIoctlHere = hex: 1
RenderConverter = hex: 2,4,5,3
SpdifOutConverter = hex: 8
SpdifMaster = hex: 2
CaptureConverter = hex: 6
EnableCompositeMuxAndAdcCtrl = hex: 0
Associations = hex: 1,3,2
DisableSPDIFControl = hex: 1
SpdifOutCtrl = hex: 1
FixedLevelOnLineOut = hex: 0
DigitalVolumeControl = hex: 1
EnableInputMonitor = hex: 1
KeepAdcAlwaysOn = hex: 1
MasterControlsIndependentMixerInputs = hex: 1
MicBoost = hex: 0
Mic2Boost = hex: 0
EnableSetFormatSupport = hex: 1
EnableHwSpeakerConfigurationSupport = hex: 0
#24-bit resolution, all rates except 8K
EnabledPcmRenderBitsAndRates = dword: 0xfffffffe
EnabledPcmCaptureBitsAndRates = dword: 0xfffffffe
#HW Volume Control
EnableVolumeKnob = hex: 1
#Dolby enable
DDLHere = hex: 1
[HKR\Settings\filter\Rear\TopoNames]
[HKR\Settings\filter\Rear\plugins]
RegVersion = dword: 1
[HKR\settings\filter\Rear\plugins\render\DDLdownmix]
load = dword: 1
idEffect = dword: 10
order = dword: 100
mode = dword: 0x270
[HKR\settings\filter\Rear\plugins\render\ChannelDup]
load = dword: 1
idEffect = dword: 15
idEffectType = dword: 15
order = dword: 200
[HKR\settings\filter\Rear\plugins\render\SoftAmp]
load = dword: 1
idEffect = dword: 20
order = dword: 1000
[HKR\Settings\filter\Rear\presets]
RegVersion = dword: 1
[HKR\Settings\filter\Rear\Presets\_Initial\Render\DDLdownmix]
Bypass = dword: 0
OutAc3 = dword: 0
DownmixAnalog = dword: 1
DownmixSurrounds = dword: 1
[HKR\settings\filter\Rear\Presets\_Initial\Render\ChannelDup]
Bypass = dword: 0
DigitalOut = dword: 0
AnalogLROut = dword: 0
AnalogCLfeOut = dword: 1
AnalogLbRbOut = dword: 1
AnalogLsRsOut = dword: 0
[HKLM\SOFTWARE\Sigmatel\STacGUI]
Config_Tab = dword: 0xF
Config_Spk = dword: 0x1
Config_Adv = dword: 0x20
Config_Dolby = dword: 0x4
Config_Rates = dword: 0x3F
Config_MicLevN = dword: 0x1
MicBoost[0] = dword: 0xA
[HKLM\Software\SigmaTel\StacGUI\XML]
Nconfigs = dword: 0x0
[History]
4/25/05 Create Sunnymead from i5.ini
4/29/05 Make sunny a separate config
5/19/05 Change to .cfg
Remove stacapi reg's (moved to INF)
5/26/05 Update to spreadsheet config
5/26/2005 Updated by WIDGET
6/28/2005 Updated by WIDGET
7/1/05 Add DDL
7/6/05 Remove spreader
7/6/2005 Updated by WIDGET
7/8/2005 Updated by WIDGET, to configure FixedLevelOnLineOut and multi-out
7/11/2005 Updated by WIDGET
7/15/05 Add HW volume control
7/29/2005 v8 Updated by WIDGET. Set CD-In to no-connect.
8/4/05 v9 Set OutAC3 to off, remove old keys
v10 Add and configure stacgui.cpl
8/5/05 v11 stacgui Adv tab only
1/11/2006 Updated by WIDGET
1/11/06 Add input mute actions
2/10/2006 Updated by WIDGET
7/11/2006 Updated by WIDGET
7/19/06 Remove Fixed level volume
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.