1. BIOS_Intel_61GW112GS_A_A.zip Driver
2. 9538548.txt File Contents

9538548.txt Driver File Contents (BIOS_Intel_61GW112GS_A_A.zip)

Information and Instructions about this download file. 



=======================

File Description: BIOS ECS-MCP61PM-AM Motherboard 

Version: 61GW112GS 

Operating System: Microsoft(r) Windows(r) XP / Windows Vista

Part Number: 9538548

Date: 10/23/2007

=======================





Table of Contents

=======================

Overview

Identification

Installation

Removal 		

Troubleshooting

Reason for Update

Applicable Part Numbers

=======================





Overview



This document describes the steps necessary to upgrade to BIOS version 61GW112GS for the ECS-MCP61PM-AM motherboard.





Identification



This BIOS can be installed on a ECS-MCP61PM-AM motherboard.





Installation



The BIOS should be flashed if:



1.  You are updating to a newer BIOS revision.



2.  A technician has told you to flash or re-flash the computer.





Steps to flash or re-flash the computer using a CD burner drive:



1.  Use CDRW burning software to Burn Disc Image of the C:\Cabs\9538548\9538548.iso file to a blank CD.



2.  After creating the bootable CD, place the CD in the CD/DVD drive, and then restart the computer.



3.  At the Menu, select 1 for Gateway BIOS 9538548.  The BIOS flash process runs automatically.  Do not press any keys or turn off the computer during this process.



4.  When complete the message "Flashing Complete" would be flashing, remove boot media used and hit <F1>.



5.  Press the F2 key to enter the CMOS Setup Utility.



6.  In the CMOS Setup Utility, select Load Optimized Defaults, and then press the ENTER key.



7.  Press the Y key, and then press ENTER to select Load Optimized Defaults.



8.  In the CMOS Setup Utility, select Save & Exit Setup, and then press ENTER.



9.  Press Y, and then press ENTER to Save to CMOS and EXIT.





Steps to flash or re-flash the computer using a floppy disk drive or bootable USB flash drive:



1.  Copy all of the BIOS files except 9538548.iso from the C:\Cabs\9538548 folder to a blank floppy disk or a USB flash drive. 



2.  Restart the computer with the floppy disk inserted/USB flash drive plugged in.



3.  At the Menu, select 1 for Gateway BIOS 9538548.  The BIOS flash process runs automatically.  Do not press any keys or turn off the computer during this process.



4.  When the flash is complete, the computer automatically restarts.  



5.  Press the F2 key to enter the CMOS Setup Utility.



6.  In the CMOS Setup Utility, select Load Optimized Defaults, and then press the ENTER key.



7.  Press the Y key, and then press ENTER to select Load Optimized Defaults.



8.  In the CMOS Setup Utility, select Save & Exit Setup, and then press ENTER.



9.  Press Y, and then press ENTER to Save to CMOS and EXIT.





Removal



Because a computer must have a BIOS to operate, there is no removal process.  The BIOS cannot be removed after it has been upgraded.





Troubleshooting



If you have trouble flashing the BIOS, try the process again following the steps listed in the Installation section of this document.  If you are still unable to flash the BIOS, verify that you are actually attempting to flash the BIOS on an ECS uBTX motherboard.  If this process still fails, contact technical support.



There may be an error indicating a CMOS Checksum error.  At the Gateway Splash screen, press the F2 key to enter the BIOS Setup Utility.  Press the ENTER key to select Load Optimized Defaults and Save and Exit Setup.  The computer restarts. 



Reason for Update:



- Modify PCB Version to 1.0A of DMI information

- Modify audio SSID to "2601h"

- Update AGESA 2.08.05

- Modify verb table to fix DTM UAA test fail





Applicable Part Numbers



GM5470E - 2900950

GM5472 - 1009566

GM5474 - 1009568

GM5639E - 1014851R



GT5086j - 1014265R

GT5094j - 1014452R

GT5477E - 1009589

GT5482E - 1009615

GT5637E - 1014914R



4006157R

4006203R