I5_WHQL.INI Driver File Contents (Audio_Sigmatel_5.10.4647.4_XPx86XPx64_A.zip)

[Models]
default=this
[CopyFiles]
stacgui.cpl = 0x25
localize.dll = 0x25
[APPS]
[DelRegKeys]
HKR\Settings=Yes
HKCU\Software\Sigmatel\Settings=Yes
HKLM\Software\Sigmatel\Presets=Yes
HKCU\Software\Microsoft\Windows\CurrentVersion\Applets\Volume Control\SigmaTel Audio=Yes
HKCU\Software\Microsoft\Windows\CurrentVersion\Applets\Volume Control\SigmaTel C-Major Audio=Yes
HKCU\Software\Microsoft\Windows\CurrentVersion\Applets\Volume Control\SigmaTel High Definition Audio=Yes
[HKR\Settings]
InitVerbs                       = hex: 34,e4,17,00, 01,e2,17,00
TraceFlags                      = dword: 0x89b3
CPL_EnableSpreaderPage          = hex: 0
CPL_EnableEqPage 		= hex: 0
CPL_MaySwitchExtAmpPowerState	= hex: 0
CPL_SaveExtraPower 		= hex: 0
CPL_SecondsAfter 		= dword: 5
CPL_SpdifTransmitterEnabledByUser = hex: 1
CPL_UserControlsMaySwitchExtAmpPowerState = hex: 0
CPL_UserControlsFixedDigitalOutRate = hex: 1
CPL_FixedDigitalOutRate         = dword: 48000
CPL_EnableJacksPage             = Hex: 0
MicBoostLevel                   = dword: 0x000A0000
[HKR\Settings\pin]
[HKR\Settings\pin\0A]
CfgDflt = dword: 0x022142F0     
[HKR\Settings\pin\0B]
CfgDflt = dword: 0x01111012     
[HKR\Settings\pin\0C]
CfgDflt = dword: 0x01813220     
[HKR\Settings\pin\0D]
CfgDflt = dword: 0x01114210     
[HKR\Settings\pin\0E]
CfgDflt = dword: 0x01A1922E     
Bias = hex: 00,05
[HKR\Settings\pin\0F]
CfgDflt = dword: 0x01117211     
[HKR\Settings\pin\10]
CfgDflt = dword: 0x01452330     
[HKR\Settings\pin\11]
CfgDflt = dword: 0x40F0F0FB     
[HKR\Settings\pin\15]
CfgDflt = dword: 0x42A193FF     
[HKR\Settings\pin\1B]
CfgDflt = dword: 0x40F0F0FC     
[HKR\Settings\connselector]
[HKR\Settings\filter\Rear]
UniqueId 		= hex: 0
LegacyIoctlHere 	= hex: 1
CaptureConverter 	= hex: 6
RenderConverter 	= hex: 2,5,4,3
SpdifMaster 		= hex: 2
SpdifOutConverter	= hex: 8
DisableSPDIFControl	= hex: 1
EnableInputMonitor      = hex: 1
KeepAdcAlwaysOn         = hex: 1
MicBoost                = hex: 0
MicBoost                = hex: 1
EnableSetFormatSupport               = hex: 1
EnableHwSpeakerConfigurationSupport  = hex: 0
MasterControlsIndependentMixerInputs = hex: 1
EnabledPcmRenderBitsAndRates = dword: 0xfffffffe
EnabledPcmCaptureBitsAndRates = dword: 0xfffffffe
[HKR\Settings\filter\rear\plugins]
RegVersion = dword: 1
[HKR\Settings\filter\rear\plugins\Render]
[HKR\Settings\filter\Rear\TopoNames]
InpMonitor              = "{AD16E140-C319-4381-98AB-AB72A3C26892}"
[HKLM\SOFTWARE\Sigmatel\STacGUI]
Config_Tab              = dword: 0xD
Config_Spk              = dword: 0x1
Config_Adv              = dword: 0x9
Config_Rates            = dword: 0x3F
Config_MicLevN          = dword: 0x1
MicBoost[0]             = dword: 0xA
[HKLM\SOFTWARE\SigmaTel\STacGUI\XML]
Nconfigs                = dword: 0
[HKCU\Software\Microsoft\Windows\CurrentVersion\Applets\Volume Control\SigmaTel Audio\Volume Control]
LineStates=hex:00,00,00,00,56,00,6f,00,6c,00,75,00,6d,00,65,00,20,00,43,00,6f,00,6e,00,74,00,72,00,6f,00,6c,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,57,00,61,00,76,00,65,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,53,00,57,00,20,00,53,00,79,00,6e,00,74,00,68,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,43,00,44,00,20,00,50,00,6c,00,61,00,79,00,65,00,72,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,49,00,6e,00,70,00,75,00,74,00,20,00,4d,00,6f,00,6e,00,69,00,74,00,6f,00,72,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
[HKLM\Software\Microsoft\Windows\CurrentVersion\RunOnce]
Sigmatel="RegSvr32 /s stacapi.dll"
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 0.89