1. BIOS_Gateway_76.19_A_A.zip Driver
2. BIOS-7619.txt File Contents

BIOS-7619.txt Driver File Contents (BIOS_Gateway_76.19_A_A.zip)

Information and Instructions about this download file. 



=======================

File Description: BIOS 76.19

Version: 76.19

Operating System: Microsoft(r) Windows(r) XP and Windows Vista

Part Number: BIOS-7619.exe

Date: 05/03/2007

=======================





Table of Contents

=======================

Overview

Identification

Installation

Removal 		

Troubleshooting

Reason for Update

Applicable Part Numbers

=======================





Overview



This document describes the steps necessary to upgrade to BIOS version 76.19 for Windows XP and Vista and the Gateway computer models listed below.





Installation



The BIOS should be flashed if:



1.  You are updating to a newer BIOS revision.



2.  A technician has told you to flash or re-flash the computer.



3.  You are upgrading to Windows Vista.



Note: Please verify the CD burner software that you have on your computer before using the bootable CD options below.



Note: you may use a bootable USB flash drive if you have one available





(Nero Express) Steps to flash or re-flash the computer using a CD burner drive:



1.  Place a blank CD in the optical drive.  If a pop up window appears, close it.



2.  Open the Nero Express burning software.



3.  Choose Disk Image or Saved Project.



4.  In the Files of Type dropdown, select All files (*.*)



5.  Locate the Image File.  The path to the file is: C:\Cabs\BIOS-7619\BIOS-7619.ISO



6.  Click Next.



7.  After the CD has been created, restart the computer with the BIOS CD in the optical drive.



8.  Boot to the optical drive.



9.  Choose Option 1 to flash the BIOS.



10.  The BIOS flashes and the computer shuts down.



11.  Turn on the computer and then press the F2 key to enter the BIOS Setup Utility.



12.  In the BIOS Setup Utility, select Load Optimized Defaults, and then press the ENTER key.



13.  Press the Y key, and then press ENTER to select Load Optimized Defaults.



14.  In the BIOS Setup Utility, select Save & Exit Setup, and then press ENTER.



15.  Press Y, and then press ENTER to Save to BIOS and EXIT.





(Power2Go) Steps to flash or re-flash the computer using a CD burner drive:



1.  Place a blank CD in the optical drive.  If a pop up window appears, close it.



2.  Open the Power2Go software.



3.  Select Disk Utilities, and then click Burn Disk Image.



4.  Click OK.



5.  Click Browse, and then navigate to where the image file is stored.  The path to the file is: C:\Cabs\BIOS-7619\BIOS-7619.ISO



6.  Click OK, and then click Burn.



7.  After the CD has been created, restart the computer with the BIOS CD in the optical drive.



8.  Boot to the optical drive.



9.  Choose Option 1 to flash the BIOS.



10.  The BIOS flashes and the computer shuts down.



11.  Turn on the computer and then press the F2 key to enter the BIOS Setup Utility.



12.  In the BIOS Setup Utility, select Load Optimized Defaults, and then press the ENTER key.



13.  Press the Y key, and then press ENTER to select Load Optimized Defaults.



14.  In the BIOS Setup Utility, select Save & Exit Setup, and then press ENTER.



15.  Press Y, and then press ENTER to Save to BIOS and EXIT.





Steps to flash or re-flash the computer using a floppy disk drive or bootable USB flash drive:



1.  Copy all of the BIOS files except BIOS-7619.iso from the C:\Cabs\BIOS-7619 folder to a USB flash drive. 



2.  Restart the computer with the USB flash drive plugged in.



3.  Enter the Boot Menu and boot to the USB flash drive.



4.  Change the directory to where you saved the BIOS files to on your USB flash drive.  



5.  Type: Autoexec.bat, and then press ENTER.



6.  After the BIOS flashes, turn on the computer and enter the BIOS Setup Utility.



7.  In the BIOS Setup Utility, select Load Optimized Defaults, and then press the ENTER key.



8.  Press the Y key, and then press ENTER to select Load Optimized Defaults.



9.  In the BIOS Setup Utility, select Save & Exit Setup, and then press ENTER.



10.  Press Y, and then press ENTER to Save to BIOS and EXIT.





Removal



Because a computer must have a BIOS to operate, there is no removal process.  The BIOS cannot be removed after it has been upgraded.





Troubleshooting



If you have trouble flashing the BIOS, try the process again following the steps listed in the Installation section of this document.  If you are still unable to flash the BIOS, verify that you are actually attempting to flash the BIOS on a model listed below.  If this process still fails, contact technical support.





Applicable Part Numbers



MX1000 Series:



1009097 - Gateway MX1023

1009098 - Gateway MX1023h

1009046 - Gateway MX1025

1013959R - Gateway MX1027



E-100M Series:



1008799 - Gateway E-100M

1014216R - Gateway E-100M

1014216R - Gateway E-100M G 

1014222R - Gateway E-100M G 

1008973 - Gateway E-100M SB

1014223R - Gateway E-100M SB 



NX100 Series:



1008798 - Gateway NX100X

1014224R - Gateway NX100X



Component Part Numbers:



2522795 

4001204  

4001193

4001203R

4006150R

4006142R

4001179R

ACD40GAB0910-E65C